diff --git a/Documentation/ABI/obsolete/sysfs-class-rfkill b/Documentation/ABI/obsolete/sysfs-class-rfkill
index 4201d5b05515564a3650af7de8f8b522b87e53aa..ff60ad9eca4c7ba390e22bd0eda0378bfbe236f1 100644
--- a/Documentation/ABI/obsolete/sysfs-class-rfkill
+++ b/Documentation/ABI/obsolete/sysfs-class-rfkill
@@ -7,7 +7,7 @@ Date: 09-Jul-2007
KernelVersion v2.6.22
Contact: linux-wireless@vger.kernel.org
Description: Current state of the transmitter.
- This file is deprecated and sheduled to be removed in 2014,
+ This file is deprecated and scheduled to be removed in 2014,
because its not possible to express the 'soft and hard block'
state of the rfkill driver.
Values: A numeric value.
diff --git a/Documentation/ABI/stable/sysfs-module b/Documentation/ABI/stable/sysfs-module
index 75be4311833502b3adaa8b01029b7c9ec9a434fe..a0dd21c6db59ed84f06694c1ac0aa30c082800ad 100644
--- a/Documentation/ABI/stable/sysfs-module
+++ b/Documentation/ABI/stable/sysfs-module
@@ -6,7 +6,7 @@ Description:
The name of the module that is in the kernel. This
module name will show up either if the module is built
directly into the kernel, or if it is loaded as a
- dyanmic module.
+ dynamic module.
/sys/module/MODULENAME/parameters
This directory contains individual files that are each
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index 880c95607f09c04260faffdf0f584e5624fa333a..31df1aa0071084ce43b89bc6dd5521524cf5ed24 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -945,7 +945,7 @@ and other resources, etc.
<listitem>
<para>
- !BSY && ERR after CDB tranfer starts but before the
+ !BSY && ERR after CDB transfer starts but before the
last byte of CDB is transferred. ATA/ATAPI standard states
that "The device shall not terminate the PACKET command
with an error before the last byte of the command packet has
@@ -1050,7 +1050,7 @@ and other resources, etc.
to complete a command. Combined with the fact that MWDMA
and PIO transfer errors aren't allowed to use ICRC bit up to
ATA/ATAPI-7, it seems to imply that ABRT bit alone could
- indicate tranfer errors.
+ indicate transfer errors.
</para>
<para>
However, ATA/ATAPI-8 draft revision 1f removes the part
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index c736380b4647acc649f2203b09c394802cd6180e..a2485b3ff3d267f47020714382543bc8ca157d43 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -444,7 +444,7 @@ linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR24</constant></link></para></entr
<entry><para><link
linkend="pixfmt-rgb"><constant>V4L2_PIX_FMT_BGR32</constant></link><footnote>
<para>Presumably all V4L RGB formats are
-little-endian, although some drivers might interpret them according to machine endianess. V4L2 defines little-endian, big-endian and red/blue
+little-endian, although some drivers might interpret them according to machine endianness. V4L2 defines little-endian, big-endian and red/blue
swapped variants. For details see <xref linkend="pixfmt-rgb" />.</para>
</footnote></para></entry>
</row>
@@ -823,7 +823,7 @@ standard); 35468950 Hz PAL and SECAM (625-line standards)</entry>
<row>
<entry>sample_format</entry>
<entry>V4L2_PIX_FMT_GREY. The last four bytes (a
-machine endianess integer) contain a frame counter.</entry>
+machine endianness integer) contain a frame counter.</entry>
</row>
<row>
<entry>start[]</entry>
diff --git a/Documentation/arm/kernel_user_helpers.txt b/Documentation/arm/kernel_user_helpers.txt
index a17df9f91d163d58a1497760d13a1ca3e16557ff..5673594717cfcfe798d87ae95b7e5a1d386aeaff 100644
--- a/Documentation/arm/kernel_user_helpers.txt
+++ b/Documentation/arm/kernel_user_helpers.txt
@@ -25,7 +25,7 @@ inline (either in the code emitted directly by the compiler, or part of
the implementation of a library call) when optimizing for a recent enough
processor that has the necessary native support, but only if resulting
binaries are already to be incompatible with earlier ARM processors due to
-useage of similar native instructions for other things. In other words
+usage of similar native instructions for other things. In other words
don't make binaries unable to run on earlier processors just for the sake
of not using these kernel helpers if your compiled code is not going to
use new instructions for other purpose.
diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt
index 84f0a15fc210aec69648309a7676717d889ef6e5..b4b1fb3a83f00dcc4d0155fdab93281af254301a 100644
--- a/Documentation/cgroups/blkio-controller.txt
+++ b/Documentation/cgroups/blkio-controller.txt
@@ -94,11 +94,11 @@ Throttling/Upper Limit policy
Hierarchical Cgroups
====================
-- Currently none of the IO control policy supports hierarhical groups. But
- cgroup interface does allow creation of hierarhical cgroups and internally
+- Currently none of the IO control policy supports hierarchical groups. But
+ cgroup interface does allow creation of hierarchical cgroups and internally
IO policies treat them as flat hierarchy.
- So this patch will allow creation of cgroup hierarhcy but at the backend
+ So this patch will allow creation of cgroup hierarchcy but at the backend
everything will be treated as flat. So if somebody created a hierarchy like
as follows.
@@ -266,7 +266,7 @@ Proportional weight policy files
- blkio.idle_time
- Debugging aid only enabled if CONFIG_DEBUG_BLK_CGROUP=y.
This is the amount of time spent by the IO scheduler idling for a
- given cgroup in anticipation of a better request than the exising ones
+ given cgroup in anticipation of a better request than the existing ones
from other queues/cgroups. This is in nanoseconds. If this is read
when the cgroup is in an idling state, the stat will only report the
idle_time accumulated till the last idle period and will not include
@@ -283,34 +283,34 @@ Throttling/Upper limit policy files
-----------------------------------
- blkio.throttle.read_bps_device
- Specifies upper limit on READ rate from the device. IO rate is
- specified in bytes per second. Rules are per deivce. Following is
+ specified in bytes per second. Rules are per device. Following is
the format.
echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.read_bps_device
- blkio.throttle.write_bps_device
- Specifies upper limit on WRITE rate to the device. IO rate is
- specified in bytes per second. Rules are per deivce. Following is
+ specified in bytes per second. Rules are per device. Following is
the format.
echo "<major>:<minor> <rate_bytes_per_second>" > /cgrp/blkio.throttle.write_bps_device
- blkio.throttle.read_iops_device
- Specifies upper limit on READ rate from the device. IO rate is
- specified in IO per second. Rules are per deivce. Following is
+ specified in IO per second. Rules are per device. Following is
the format.
echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.read_iops_device
- blkio.throttle.write_iops_device
- Specifies upper limit on WRITE rate to the device. IO rate is
- specified in io per second. Rules are per deivce. Following is
+ specified in io per second. Rules are per device. Following is
the format.
echo "<major>:<minor> <rate_io_per_second>" > /cgrp/blkio.throttle.write_iops_device
Note: If both BW and IOPS rules are specified for a device, then IO is
- subjectd to both the constraints.
+ subjected to both the constraints.
- blkio.throttle.io_serviced
- Number of IOs (bio) completed to/from the disk by the group (as
diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt
index 2a8c11331d2d6e8a861d272546e8a7f7d9f02cf8..946c73342cdea1c4afb23cb889828856a5e6308d 100644
--- a/Documentation/device-mapper/dm-raid.txt
+++ b/Documentation/device-mapper/dm-raid.txt
@@ -28,7 +28,7 @@ The target is named "raid" and it accepts the following parameters:
raid6_nc RAID6 N continue
- rotating parity N (right-to-left) with data continuation
- Refererence: Chapter 4 of
+ Reference: Chapter 4 of
http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf
<#raid_params>: The number of parameters that follow.
diff --git a/Documentation/device-mapper/persistent-data.txt b/Documentation/device-mapper/persistent-data.txt
index 0e5df9b04ad2db5d96e95fdee83173c1e45a763a..a333bcb3a6c23671f77b09cb5c725ba023cc12c8 100644
--- a/Documentation/device-mapper/persistent-data.txt
+++ b/Documentation/device-mapper/persistent-data.txt
@@ -3,7 +3,7 @@ Introduction
The more-sophisticated device-mapper targets require complex metadata
that is managed in kernel. In late 2010 we were seeing that various
-different targets were rolling their own data strutures, for example:
+different targets were rolling their own data structures, for example:
- Mikulas Patocka's multisnap implementation
- Heinz Mauelshagen's thin provisioning target
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index dbdab40ed3a62471879a1a6fb7b0d53c545cc8f9..edc618a8aab22da80037c2a8b406757d86171535 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -5,7 +5,7 @@ IPs present in the SoC.
On top of that an omap_device is created to extend the platform_device
capabilities and to allow binding with one or several hwmods.
The hwmods will contain all the information to build the device:
-adresse range, irq lines, dma lines, interconnect, PRCM register,
+address range, irq lines, dma lines, interconnect, PRCM register,
clock domain, input clocks.
For the moment just point to the existing hwmod, the next step will be
to move data from hwmod to device-tree representation.
diff --git a/Documentation/devicetree/bindings/arm/sirf.txt b/Documentation/devicetree/bindings/arm/sirf.txt
index 6b07f65b32de0e4563d80f20e4355fb7f5f9081e..1881e1c6dda59aea8d1c0076a70481eaec3a59fd 100644
--- a/Documentation/devicetree/bindings/arm/sirf.txt
+++ b/Documentation/devicetree/bindings/arm/sirf.txt
@@ -1,3 +1,3 @@
-prima2 "cb" evalutation board
+prima2 "cb" evaluation board
Required root node properties:
- compatible = "sirf,prima2-cb", "sirf,prima2";
diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt
index 7c1329de0596a34ce81d60f214d46a43933f05c0..da0bfeb4253dfb5ad4546e1f199efdb28f8fd950 100644
--- a/Documentation/devicetree/booting-without-of.txt
+++ b/Documentation/devicetree/booting-without-of.txt
@@ -169,7 +169,7 @@ it with special cases.
b) Entry with a flattened device-tree block. Firmware loads the
physical address of the flattened device tree block (dtb) into r2,
- r1 is not used, but it is considered good practise to use a valid
+ r1 is not used, but it is considered good practice to use a valid
machine number as described in Documentation/arm/Booting.
r0 : 0
diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt
index bbe6cb3d1856b8943dd04d3449af9d39d5c1e7dc..879b6e31e2da6b4992d9ec5c556c741089851fff 100644
--- a/Documentation/dmaengine.txt
+++ b/Documentation/dmaengine.txt
@@ -63,7 +63,7 @@ The slave DMA usage consists of following steps:
struct dma_slave_config *config)
Please see the dma_slave_config structure definition in dmaengine.h
- for a detailed explaination of the struct members. Please note
+ for a detailed explanation of the struct members. Please note
that the 'direction' member will be going away as it duplicates the
direction given in the prepare call.
diff --git a/Documentation/fb/matroxfb.txt b/Documentation/fb/matroxfb.txt
index e5ce8a1a978bf815654228c9d1a1e92625ffdb05..b95f5bb522f25e2e8ea6b1ba6ecbd06ecb82668c 100644
--- a/Documentation/fb/matroxfb.txt
+++ b/Documentation/fb/matroxfb.txt
@@ -177,8 +177,8 @@ sgram - tells to driver that you have Gxx0 with SGRAM memory. It has no
effect without `init'.
sdram - tells to driver that you have Gxx0 with SDRAM memory.
It is a default.
-inv24 - change timings parameters for 24bpp modes on Millenium and
- Millenium II. Specify this if you see strange color shadows around
+inv24 - change timings parameters for 24bpp modes on Millennium and
+ Millennium II. Specify this if you see strange color shadows around
characters.
noinv24 - use standard timings. It is the default.
inverse - invert colors on screen (for LCD displays)
@@ -204,9 +204,9 @@ grayscale - enable grayscale summing. It works in PSEUDOCOLOR modes (text,
can paint colors.
nograyscale - disable grayscale summing. It is default.
cross4MB - enables that pixel line can cross 4MB boundary. It is default for
- non-Millenium.
+ non-Millennium.
nocross4MB - pixel line must not cross 4MB boundary. It is default for
- Millenium I or II, because of these devices have hardware
+ Millennium I or II, because of these devices have hardware
limitations which do not allow this. But this option is
incompatible with some (if not all yet released) versions of
XF86_FBDev.
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 10ec4639f1522dad34d66eea61443750435fe3ae..8c10bf375c73d281c5b9e0919e23e1064ba8abc9 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -308,7 +308,7 @@ min_batch_time=usec This parameter sets the commit time (as
fast disks, at the cost of increasing latency.
journal_ioprio=prio The I/O priority (from 0 to 7, where 0 is the
- highest priorty) which should be used for I/O
+ highest priority) which should be used for I/O
operations submitted by kjournald2 during a
commit operation. This defaults to 3, which is
a slightly higher priority than the default I/O
@@ -343,7 +343,7 @@ noinit_itable Do not initialize any uninitialized inode table
init_itable=n The lazy itable init code will wait n times the
number of milliseconds it took to zero out the
previous block group's inode table. This
- minimizes the impact on the systme performance
+ minimizes the impact on the system performance
while file system's inode table is being initialized.
discard Controls whether ext4 should issue discard/TRIM
diff --git a/Documentation/filesystems/gfs2-uevents.txt b/Documentation/filesystems/gfs2-uevents.txt
index d81889669293d84d8fce823739618e37785cd75f..19a19ebebc34b8ced9398985a395661531dcd857 100644
--- a/Documentation/filesystems/gfs2-uevents.txt
+++ b/Documentation/filesystems/gfs2-uevents.txt
@@ -62,7 +62,7 @@ be fixed.
The REMOVE uevent is generated at the end of an unsuccessful mount
or at the end of a umount of the filesystem. All REMOVE uevents will
-have been preceded by at least an ADD uevent for the same fileystem,
+have been preceded by at least an ADD uevent for the same filesystem,
and unlike the other uevents is generated automatically by the kernel's
kobject subsystem.
diff --git a/Documentation/filesystems/pohmelfs/network_protocol.txt b/Documentation/filesystems/pohmelfs/network_protocol.txt
index 65e03dd44823879a923d4d0f819587865cc67f1d..c680b4b5353d56fc4dab3df07cf34dc8d3ac2c8c 100644
--- a/Documentation/filesystems/pohmelfs/network_protocol.txt
+++ b/Documentation/filesystems/pohmelfs/network_protocol.txt
@@ -20,7 +20,7 @@ Commands can be embedded into transaction command (which in turn has own command
so one can extend protocol as needed without breaking backward compatibility as long
as old commands are supported. All string lengths include tail 0 byte.
-All commands are transferred over the network in big-endian. CPU endianess is used at the end peers.
+All commands are transferred over the network in big-endian. CPU endianness is used at the end peers.
@cmd - command number, which specifies command to be processed. Following
commands are used currently:
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index 3d9393b845b8f71095dd2b55a1bd601ef70c37cd..e916e3d36488d982b4cc1a8580ea5f0529af79d2 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -993,7 +993,7 @@ struct dentry_operations {
If the 'rcu_walk' parameter is true, then the caller is doing a
pathwalk in RCU-walk mode. Sleeping is not permitted in this mode,
- and the caller can be asked to leave it and call again by returing
+ and the caller can be asked to leave it and call again by returning
-ECHILD.
This function is only used if DCACHE_MANAGE_TRANSIT is set on the
diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275
index ab70d96d2dfd5fdb583359bb6fed0aee3ebee4ce..e5f982c845fd055525d40683e6eeb964ffce958e 100644
--- a/Documentation/hwmon/adm1275
+++ b/Documentation/hwmon/adm1275
@@ -53,7 +53,7 @@ attributes are write-only, all other attributes are read-only.
in1_label "vin1" or "vout1" depending on chip variant and
configuration.
in1_input Measured voltage.
-in1_min Minumum Voltage.
+in1_min Minimum Voltage.
in1_max Maximum voltage.
in1_min_alarm Voltage low alarm.
in1_max_alarm Voltage high alarm.
diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064
index f6e8bcbfaccfb4cd2c31671741fbb56b42b7cb7d..f8b478076f6dfda9e2fdbd47e2a4b843ca13bc51 100644
--- a/Documentation/hwmon/max16064
+++ b/Documentation/hwmon/max16064
@@ -42,9 +42,9 @@ attributes are read-only.
in[1-4]_label "vout[1-4]"
in[1-4]_input Measured voltage. From READ_VOUT register.
-in[1-4]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-4]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in[1-4]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-4]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440
index 8ab51536a1eb2b5dca0220bf45b7b6891b4e1213..19743919ea564985a6c34b485e89472d71077ca2 100644
--- a/Documentation/hwmon/max34440
+++ b/Documentation/hwmon/max34440
@@ -48,9 +48,9 @@ attributes are read-only.
in[1-6]_label "vout[1-6]".
in[1-6]_input Measured voltage. From READ_VOUT register.
-in[1-6]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-6]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in[1-6]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-6]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688
index 71ed10a3c94e7d6ad63db3ccd5edbd054d38ec60..fe849871df32dbe81af61fca76c300794047a1fe 100644
--- a/Documentation/hwmon/max8688
+++ b/Documentation/hwmon/max8688
@@ -42,9 +42,9 @@ attributes are read-only.
in1_label "vout1"
in1_input Measured voltage. From READ_VOUT register.
-in1_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in1_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in1_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in1_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
diff --git a/Documentation/hwmon/ucd9000 b/Documentation/hwmon/ucd9000
index 40ca6db50c4851d003a26b6e24febf63dd773a97..0df5f276505b6470e28f00c86c6bd1d76aad5b4d 100644
--- a/Documentation/hwmon/ucd9000
+++ b/Documentation/hwmon/ucd9000
@@ -70,9 +70,9 @@ attributes are read-only.
in[1-12]_label "vout[1-12]".
in[1-12]_input Measured voltage. From READ_VOUT register.
-in[1-12]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-12]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-12]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in[1-12]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-12]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[1-12]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[1-12]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
@@ -82,7 +82,7 @@ in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
curr[1-12]_label "iout[1-12]".
curr[1-12]_input Measured current. From READ_IOUT register.
curr[1-12]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
-curr[1-12]_lcrit Critical minumum output current. From IOUT_UC_FAULT_LIMIT
+curr[1-12]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT
register.
curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
curr[1-12]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
diff --git a/Documentation/hwmon/ucd9200 b/Documentation/hwmon/ucd9200
index 3c58607f72fe41095a20ebdfd6a2663ea3834cff..fd7d07b1908a9d0c5dfd3c38f3bb73c6cf980210 100644
--- a/Documentation/hwmon/ucd9200
+++ b/Documentation/hwmon/ucd9200
@@ -54,9 +54,9 @@ attributes are read-only.
in1_label "vin".
in1_input Measured voltage. From READ_VIN register.
-in1_min Minumum Voltage. From VIN_UV_WARN_LIMIT register.
+in1_min Minimum Voltage. From VIN_UV_WARN_LIMIT register.
in1_max Maximum voltage. From VIN_OV_WARN_LIMIT register.
-in1_lcrit Critical minumum Voltage. VIN_UV_FAULT_LIMIT register.
+in1_lcrit Critical minimum Voltage. VIN_UV_FAULT_LIMIT register.
in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT register.
in1_min_alarm Voltage low alarm. From VIN_UV_WARNING status.
in1_max_alarm Voltage high alarm. From VIN_OV_WARNING status.
@@ -65,9 +65,9 @@ in1_crit_alarm Voltage critical high alarm. From VIN_OV_FAULT status.
in[2-5]_label "vout[1-4]".
in[2-5]_input Measured voltage. From READ_VOUT register.
-in[2-5]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[2-5]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[2-5]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
-in[2-5]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[2-5]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[2-5]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[2-5]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
@@ -80,7 +80,7 @@ curr1_input Measured current. From READ_IIN register.
curr[2-5]_label "iout[1-4]".
curr[2-5]_input Measured current. From READ_IOUT register.
curr[2-5]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
-curr[2-5]_lcrit Critical minumum output current. From IOUT_UC_FAULT_LIMIT
+curr[2-5]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT
register.
curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
curr[2-5]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index 51f76a189feead958ae094ab9608b87c74bcdacb..5865a2470d4a3a004545e0a9952d7c696c65b8b1 100644
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -108,7 +108,7 @@ in1_label "vin"
in1_input Measured input voltage.
in1_min Minimum input voltage.
in1_max Maximum input voltage.
-in1_lcrit Critical minumum input voltage.
+in1_lcrit Critical minimum input voltage.
in1_crit Critical maximum input voltage.
in1_min_alarm Input voltage low alarm.
in1_max_alarm Input voltage high alarm.
@@ -117,7 +117,7 @@ in1_crit_alarm Input voltage critical high alarm.
in2_label "vout1"
in2_input Measured output voltage.
-in2_lcrit Critical minumum output Voltage.
+in2_lcrit Critical minimum output Voltage.
in2_crit Critical maximum output voltage.
in2_lcrit_alarm Critical output voltage critical low alarm.
in2_crit_alarm Critical output voltage critical high alarm.
diff --git a/Documentation/i2o/ioctl b/Documentation/i2o/ioctl
index 22ca53a67e23af5324fbf6b73ca820927bc12c50..27c3c5493116ada2eebf9fcd2480aea55072c5e4 100644
--- a/Documentation/i2o/ioctl
+++ b/Documentation/i2o/ioctl
@@ -138,7 +138,7 @@ VI. Setting Parameters
The return value is the size in bytes of the data written into
ops->resbuf if no errors occur. If an error occurs, -1 is returned
- and errno is set appropriatly:
+ and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@@ -222,7 +222,7 @@ VIII. Downloading Software
RETURNS
This function returns 0 no errors occur. If an error occurs, -1
- is returned and errno is set appropriatly:
+ is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@@ -264,7 +264,7 @@ IX. Uploading Software
RETURNS
This function returns 0 if no errors occur. If an error occurs, -1
- is returned and errno is set appropriatly:
+ is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@@ -301,7 +301,7 @@ X. Removing Software
RETURNS
This function returns 0 if no errors occur. If an error occurs, -1
- is returned and errno is set appropriatly:
+ is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
@@ -325,7 +325,7 @@ X. Validating Configuration
RETURNS
This function returns 0 if no erro occur. If an error occurs, -1 is
- returned and errno is set appropriatly:
+ returned and errno is set appropriately:
ETIMEDOUT Timeout waiting for reply message
ENXIO Invalid IOP number
@@ -360,7 +360,7 @@ XI. Configuration Dialog
RETURNS
This function returns 0 if no error occur. If an error occurs, -1
- is returned and errno is set appropriatly:
+ is returned and errno is set appropriately:
EFAULT Invalid user space pointer was passed
ENXIO Invalid IOP number
diff --git a/Documentation/ide/ChangeLog.ide-cd.1994-2004 b/Documentation/ide/ChangeLog.ide-cd.1994-2004
index 190d17bfff6245282d3fa9cc0f2bad3e4e02eb17..4cc3ad99f39b394cc713ca193c275638cb766726 100644
--- a/Documentation/ide/ChangeLog.ide-cd.1994-2004
+++ b/Documentation/ide/ChangeLog.ide-cd.1994-2004
@@ -175,7 +175,7 @@
* since the .pdf version doesn't seem to work...
* -- Updated the TODO list to something more current.
*
- * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect mechine endianess,
+ * 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect machine endianness,
* patch thanks to "Eddie C. Dost" <ecd@skynet.be>
*
* 4.50 Oct 19, 1998 -- New maintainers!
diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt
index f274c28b510355dde7c2bfca3c9fc5a4ecd0b400..9c407f01d74f8fb36fc8d5c25d77d39a546e4b1c 100644
--- a/Documentation/input/alps.txt
+++ b/Documentation/input/alps.txt
@@ -131,8 +131,8 @@ number of contacts (f1 and f0 in the table below).
byte 5: 0 1 ? ? ? ? f1 f0
This packet only appears after a position packet with the mt bit set, and
-ususally only appears when there are two or more contacts (although
-ocassionally it's seen with only a single contact).
+usually only appears when there are two or more contacts (although
+occassionally it's seen with only a single contact).
The final v3 packet type is the trackstick packet.
diff --git a/Documentation/input/joystick.txt b/Documentation/input/joystick.txt
index 8007b7ca87bf751a06b800967c493e90092d3324..304262bb661a87b7e55631c18082f8462b9d859a 100644
--- a/Documentation/input/joystick.txt
+++ b/Documentation/input/joystick.txt
@@ -330,7 +330,7 @@ the USB documentation for how to setup an USB mouse.
The TM DirectConnect (BSP) protocol is supported by the tmdc.c
module. This includes, but is not limited to:
-* ThrustMaster Millenium 3D Inceptor
+* ThrustMaster Millennium 3D Interceptor
* ThrustMaster 3D Rage Pad
* ThrustMaster Fusion Digital Game Pad
diff --git a/Documentation/ioctl/hdio.txt b/Documentation/ioctl/hdio.txt
index 91a6ecbae0bb9601b7d50e084af1eeb96869f730..18eb98c44ffeb1e24bec6c1efb7b6937d97fb75a 100644
--- a/Documentation/ioctl/hdio.txt
+++ b/Documentation/ioctl/hdio.txt
@@ -596,7 +596,7 @@ HDIO_DRIVE_TASKFILE execute raw taskfile
if CHS/LBA28
The association between in_flags.all and each enable
- bitfield flips depending on endianess; fortunately, TASKFILE
+ bitfield flips depending on endianness; fortunately, TASKFILE
only uses inflags.b.data bit and ignores all other bits.
The end result is that, on any endian machines, it has no
effect other than modifying in_flags on completion.
@@ -720,7 +720,7 @@ HDIO_DRIVE_TASKFILE execute raw taskfile
[6] Do not access {in|out}_flags->all except for resetting
all the bits. Always access individual bit fields. ->all
- value will flip depending on endianess. For the same
+ value will flip depending on endianness. For the same
reason, do not use IDE_{TASKFILE|HOB}_STD_{OUT|IN}_FLAGS
constants defined in hdreg.h.
diff --git a/Documentation/kbuild/kconfig-language.txt b/Documentation/kbuild/kconfig-language.txt
index 44e2649fbb295db936245c4c0de09109738bfc5e..a686f9cd69c11797f85bea64333b30a33c97e612 100644
--- a/Documentation/kbuild/kconfig-language.txt
+++ b/Documentation/kbuild/kconfig-language.txt
@@ -117,7 +117,7 @@ applicable everywhere (see syntax).
This attribute is only applicable to menu blocks, if the condition is
false, the menu block is not displayed to the user (the symbols
contained there can still be selected by other symbols, though). It is
- similar to a conditional "prompt" attribude for individual menu
+ similar to a conditional "prompt" attribute for individual menu
entries. Default value of "visible" is true.
- numerical ranges: "range" <symbol> <symbol> ["if" <expr>]
diff --git a/Documentation/networking/fore200e.txt b/Documentation/networking/fore200e.txt
index 6e0d2a9613ec22d108cb40f56c3f839a45344e43..f648eb2651887db8fd95ca4706714c9591113309 100644
--- a/Documentation/networking/fore200e.txt
+++ b/Documentation/networking/fore200e.txt
@@ -44,7 +44,7 @@ the 'software updates' pages. The firmware binaries are part of
the various ForeThought software distributions.
Notice that different versions of the PCA-200E firmware exist, depending
-on the endianess of the host architecture. The driver is shipped with
+on the endianness of the host architecture. The driver is shipped with
both little and big endian PCA firmware images.
Name and location of the new firmware images can be set at kernel
diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index c56ec99d7b2fbec50f3456c71b83961f1e88e961..2f6d595f95e1c5e55307a8f228968d6afa39f499 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -1718,7 +1718,7 @@ Changes from 20040319 to 20040326
* lpfc_els_timeout_handler() now uses system timer.
* Further cleanup of #ifdef powerpc
* lpfc_scsi_timeout_handler() now uses system timer.
- * Replace common driver's own defines for endianess w/ Linux's
+ * Replace common driver's own defines for endianness w/ Linux's
__BIG_ENDIAN etc.
* Added #ifdef IPFC for all IPFC specific code.
* lpfc_disc_retry_rptlun() now uses system timer.
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 57566bacb4c56c8182f0e9b16bafe74c9b1233ab..83f8ea8b79ebe378cc8ccb919fd8834eca21e60f 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -510,7 +510,7 @@ i. Support for 1078 type (ppc IOP) controller, device id : 0x60 added.
3 Older Version : 00.00.02.02
i. Register 16 byte CDB capability with scsi midlayer
- "Ths patch properly registers the 16 byte command length capability of the
+ "This patch properly registers the 16 byte command length capability of the
megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas
hardware supports 16 byte CDB's."
diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt
index 61c0531e044a75f68f4eea49f846d78d42f55194..3303d218b32ec69ed529e3fcc1081478fbc5ec5a 100644
--- a/Documentation/scsi/tmscsim.txt
+++ b/Documentation/scsi/tmscsim.txt
@@ -102,7 +102,7 @@ So take at least the following measures:
ftp://student.physik.uni-dortmund.de/pub/linux/kernel/bootdisk.gz
One more warning: I used to overclock my PCI bus to 41.67 MHz. My Tekram
-DC390F (Sym53c875) accepted this as well as my Millenium. But the Am53C974
+DC390F (Sym53c875) accepted this as well as my Millennium. But the Am53C974
produced errors and started to corrupt my disks. So don't do that! A 37.50
MHz PCI bus works for me, though, but I don't recommend using higher clocks
than the 33.33 MHz being in the PCI spec.
diff --git a/Documentation/security/Smack.txt b/Documentation/security/Smack.txt
index e9dab41c0fe0edd896b6ced2c7b8a455847849e6..d2f72ae66432467e0726eb4b0f7a29297c6784a3 100644
--- a/Documentation/security/Smack.txt
+++ b/Documentation/security/Smack.txt
@@ -536,6 +536,6 @@ writing a single character to the /smack/logging file :
3 : log denied & accepted
Events are logged as 'key=value' pairs, for each event you at least will get
-the subjet, the object, the rights requested, the action, the kernel function
+the subject, the object, the rights requested, the action, the kernel function
that triggered the event, plus other pairs depending on the type of event
audited.
diff --git a/Documentation/security/keys-trusted-encrypted.txt b/Documentation/security/keys-trusted-encrypted.txt
index c9e4855ed3d7958f4bbbcc53025b7e8fec0c2261..e105ae97a4f5c0ff71387a5a895c7c4872e07afa 100644
--- a/Documentation/security/keys-trusted-encrypted.txt
+++ b/Documentation/security/keys-trusted-encrypted.txt
@@ -1,7 +1,7 @@
Trusted and Encrypted Keys
Trusted and Encrypted Keys are two new key types added to the existing kernel
-key ring service. Both of these new types are variable length symmetic keys,
+key ring service. Both of these new types are variable length symmetric keys,
and in both cases all keys are created in the kernel, and user space sees,
stores, and loads only encrypted blobs. Trusted Keys require the availability
of a Trusted Platform Module (TPM) chip for greater security, while Encrypted
diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt
index 4d75931d2d79e7febde59664b005798827df6d26..fcbe7a70340574de9ff4e2ad12ac53ea212fc338 100644
--- a/Documentation/security/keys.txt
+++ b/Documentation/security/keys.txt
@@ -668,7 +668,7 @@ The keyctl syscall functions are:
If the kernel calls back to userspace to complete the instantiation of a
key, userspace should use this call mark the key as negative before the
- invoked process returns if it is unable to fulfil the request.
+ invoked process returns if it is unable to fulfill the request.
The process must have write access on the key to be able to instantiate
it, and the key must be uninstantiated.
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 936699e4f04b0abdf74788b66ace8ab1a16f66ff..12e3a0fb9bec3f9a358f42be1cd8ce2cb8195435 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1588,7 +1588,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module supports autoprobe a chip.
- Note: the driver may have problems regarding endianess.
+ Note: the driver may have problems regarding endianness.
The power-management is supported.
diff --git a/Documentation/video4linux/uvcvideo.txt b/Documentation/video4linux/uvcvideo.txt
index 848d620dcc5cf35ff2fad404e1e6cea9070bece2..35ce19cddcf8070501e0d30f81c2fde2ac2a2456 100644
--- a/Documentation/video4linux/uvcvideo.txt
+++ b/Documentation/video4linux/uvcvideo.txt
@@ -116,7 +116,7 @@ Description:
A UVC control can be mapped to several V4L2 controls. For instance,
a UVC pan/tilt control could be mapped to separate pan and tilt V4L2
controls. The UVC control is divided into non overlapping fields using
- the 'size' and 'offset' fields and are then independantly mapped to
+ the 'size' and 'offset' fields and are then independently mapped to
V4L2 control.
For signed integer V4L2 controls the data_type field should be set to
diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt
index 5dc972c09b556353ccbf99fec2543da9880a55eb..fa5f1dbc6b235f7ac12d08d5c0f70d7b9275821c 100644
--- a/Documentation/virtual/kvm/mmu.txt
+++ b/Documentation/virtual/kvm/mmu.txt
@@ -347,7 +347,7 @@ To instantiate a large spte, four constraints must be satisfied:
- the spte must point to a large host page
- the guest pte must be a large pte of at least equivalent size (if tdp is
- enabled, there is no guest pte and this condition is satisified)
+ enabled, there is no guest pte and this condition is satisfied)
- if the spte will be writeable, the large page frame may not overlap any
write-protected pages
- the guest page must be wholly contained by a single memory slot
@@ -356,7 +356,7 @@ To check the last two conditions, the mmu maintains a ->write_count set of
arrays for each memory slot and large page size. Every write protected page
causes its write_count to be incremented, thus preventing instantiation of
a large spte. The frames at the end of an unaligned memory slot have
-artificically inflated ->write_counts so they can never be instantiated.
+artificially inflated ->write_counts so they can never be instantiated.
Further reading
===============
diff --git a/Documentation/virtual/virtio-spec.txt b/Documentation/virtual/virtio-spec.txt
index a350ae135b8c4073bd2a0092fae182d7e8ffaca7..da094737e2f8660519d7fefbfde2c11f6acd00fd 100644
--- a/Documentation/virtual/virtio-spec.txt
+++ b/Documentation/virtual/virtio-spec.txt
@@ -1403,7 +1403,7 @@ segmentation, if both guests are amenable.
Packets are transmitted by placing them in the transmitq, and
buffers for incoming packets are placed in the receiveq. In each
-case, the packet itself is preceeded by a header:
+case, the packet itself is preceded by a header:
struct virtio_net_hdr {
@@ -1642,7 +1642,7 @@ struct virtio_net_ctrl_mac {
The device can filter incoming packets by any number of
destination MAC addresses.[footnote:
-Since there are no guarentees, it can use a hash filter
+Since there are no guarantees, it can use a hash filter
orsilently switch to allmulti or promiscuous mode if it is given
too many addresses.
] This table is set using the class VIRTIO_NET_CTRL_MAC and the
@@ -1805,7 +1805,7 @@ the FLUSH and FLUSH_OUT types are equivalent, the device does not
distinguish between them
]). If the device has VIRTIO_BLK_F_BARRIER feature the high bit
(VIRTIO_BLK_T_BARRIER) indicates that this request acts as a
-barrier and that all preceeding requests must be complete before
+barrier and that all preceding requests must be complete before
this one, and all following requests must not be started until
this is complete. Note that a barrier does not flush caches in
the underlying backend device in host, and thus does not serve as
@@ -2118,7 +2118,7 @@ This is historical, and independent of the guest page size
Otherwise, the guest may begin to re-use pages previously given
to the balloon before the device has acknowledged their
- withdrawl. [footnote:
+ withdrawal. [footnote:
In this case, deflation advice is merely a courtesy
]
diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt
index 609d1a34876a081db46776eba5cf3426c70e7835..fa206cccf89f8577a8a44ff84d0836b06b712cb5 100644
--- a/Documentation/vm/unevictable-lru.txt
+++ b/Documentation/vm/unevictable-lru.txt
@@ -619,7 +619,7 @@ all PTEs from the page. For this purpose, the unevictable/mlock infrastructure
introduced a variant of try_to_unmap() called try_to_munlock().
try_to_munlock() calls the same functions as try_to_unmap() for anonymous and
-mapped file pages with an additional argument specifing unlock versus unmap
+mapped file pages with an additional argument specifying unlock versus unmap
processing. Again, these functions walk the respective reverse maps looking
for VM_LOCKED VMAs. When such a VMA is found for anonymous pages and file
pages mapped in linear VMAs, as in the try_to_unmap() case, the functions