diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index d2f34d5a80835c786122a4ba359164d524b5bde6..04705233ca0b1198de25a7f5f970257e56f87109 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1198,10 +1198,10 @@ static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port)
// detect loopback situation
if (!MAC_ADDRESS_COMPARE(&(lacpdu->actor_system), &(port->actor_system))) {
// INFO_RECEIVED_LOOPBACK_FRAMES
- printk(KERN_ERR DRV_NAME ": An illegal loopback occurred on adapter (%s)\n",
- port->slave->dev->name);
- printk(KERN_ERR "Check the configuration to verify that all Adapters "
- "are connected to 802.3ad compliant switch ports\n");
+ printk(KERN_ERR DRV_NAME ": %s: An illegal loopback occurred on "
+ "adapter (%s). Check the configuration to verify that all "
+ "Adapters are connected to 802.3ad compliant switch ports\n",
+ port->slave->dev->master->name, port->slave->dev->name);
__release_rx_machine_lock(port);
return;
}
@@ -1378,8 +1378,9 @@ static void ad_port_selection_logic(struct port *port)
}
}
if (!curr_port) { // meaning: the port was related to an aggregator but was not on the aggregator port list
- printk(KERN_WARNING DRV_NAME ": Warning: Port %d (on %s) was "
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: Port %d (on %s) was "
"related to aggregator %d but was not on its port list\n",
+ port->slave->dev->master->name,
port->actor_port_number, port->slave->dev->name,
port->aggregator->aggregator_identifier);
}
@@ -1450,7 +1451,8 @@ static void ad_port_selection_logic(struct port *port)
dprintk("Port %d joined LAG %d(new LAG)\n", port->actor_port_number, port->aggregator->aggregator_identifier);
} else {
- printk(KERN_ERR DRV_NAME ": Port %d (on %s) did not find a suitable aggregator\n",
+ printk(KERN_ERR DRV_NAME ": %s: Port %d (on %s) did not find a suitable aggregator\n",
+ port->slave->dev->master->name,
port->actor_port_number, port->slave->dev->name);
}
}
@@ -1582,8 +1584,9 @@ static void ad_agg_selection_logic(struct aggregator *aggregator)
// check if any partner replys
if (best_aggregator->is_individual) {
- printk(KERN_WARNING DRV_NAME ": Warning: No 802.3ad response from the link partner "
- "for any adapters in the bond\n");
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: No 802.3ad response from "
+ "the link partner for any adapters in the bond\n",
+ best_aggregator->slave->dev->master->name);
}
// check if there are more than one aggregator
@@ -1915,7 +1918,8 @@ int bond_3ad_bind_slave(struct slave *slave)
struct aggregator *aggregator;
if (bond == NULL) {
- printk(KERN_ERR "The slave %s is not attached to its bond\n", slave->dev->name);
+ printk(KERN_ERR DRV_NAME ": %s: The slave %s is not attached to its bond\n",
+ slave->dev->master->name, slave->dev->name);
return -1;
}
@@ -1990,7 +1994,9 @@ void bond_3ad_unbind_slave(struct slave *slave)
// if slave is null, the whole port is not initialized
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Trying to unbind an uninitialized port on %s\n", slave->dev->name);
+ printk(KERN_WARNING DRV_NAME ": Warning: %s: Trying to "
+ "unbind an uninitialized port on %s\n",
+ slave->dev->master->name, slave->dev->name);
return;
}
@@ -2021,7 +2027,8 @@ void bond_3ad_unbind_slave(struct slave *slave)
dprintk("Some port(s) related to LAG %d - replaceing with LAG %d\n", aggregator->aggregator_identifier, new_aggregator->aggregator_identifier);
if ((new_aggregator->lag_ports == port) && new_aggregator->is_active) {
- printk(KERN_INFO DRV_NAME ": Removing an active aggregator\n");
+ printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n",
+ aggregator->slave->dev->master->name);
// select new active aggregator
select_new_active_agg = 1;
}
@@ -2051,15 +2058,17 @@ void bond_3ad_unbind_slave(struct slave *slave)
ad_agg_selection_logic(__get_first_agg(port));
}
} else {
- printk(KERN_WARNING DRV_NAME ": Warning: unbinding aggregator, "
- "and could not find a new aggregator for its ports\n");
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: unbinding aggregator, "
+ "and could not find a new aggregator for its ports\n",
+ slave->dev->master->name);
}
} else { // in case that the only port related to this aggregator is the one we want to remove
select_new_active_agg = aggregator->is_active;
// clear the aggregator
ad_clear_agg(aggregator);
if (select_new_active_agg) {
- printk(KERN_INFO "Removing an active aggregator\n");
+ printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n",
+ slave->dev->master->name);
// select new active aggregator
ad_agg_selection_logic(__get_first_agg(port));
}
@@ -2085,7 +2094,8 @@ void bond_3ad_unbind_slave(struct slave *slave)
// clear the aggregator
ad_clear_agg(temp_aggregator);
if (select_new_active_agg) {
- printk(KERN_INFO "Removing an active aggregator\n");
+ printk(KERN_INFO DRV_NAME ": %s: Removing an active aggregator\n",
+ slave->dev->master->name);
// select new active aggregator
ad_agg_selection_logic(__get_first_agg(port));
}
@@ -2131,7 +2141,8 @@ void bond_3ad_state_machine_handler(struct bonding *bond)
// select the active aggregator for the bond
if ((port = __get_first_port(bond))) {
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: bond's first port is uninitialized\n");
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: bond's first port is "
+ "uninitialized\n", bond->dev->name);
goto re_arm;
}
@@ -2143,7 +2154,8 @@ void bond_3ad_state_machine_handler(struct bonding *bond)
// for each port run the state machines
for (port = __get_first_port(bond); port; port = __get_next_port(port)) {
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: Found an uninitialized port\n");
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: Found an uninitialized "
+ "port\n", bond->dev->name);
goto re_arm;
}
@@ -2184,7 +2196,8 @@ static void bond_3ad_rx_indication(struct lacpdu *lacpdu, struct slave *slave, u
port = &(SLAVE_AD_INFO(slave).port);
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: port of slave %s is uninitialized\n", slave->dev->name);
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: port of slave %s is "
+ "uninitialized\n", slave->dev->name, slave->dev->master->name);
return;
}
@@ -2230,8 +2243,9 @@ void bond_3ad_adapter_speed_changed(struct slave *slave)
// if slave is null, the whole port is not initialized
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: speed changed for uninitialized port on %s\n",
- slave->dev->name);
+ printk(KERN_WARNING DRV_NAME ": Warning: %s: speed "
+ "changed for uninitialized port on %s\n",
+ slave->dev->master->name, slave->dev->name);
return;
}
@@ -2257,8 +2271,9 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave)
// if slave is null, the whole port is not initialized
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: duplex changed for uninitialized port on %s\n",
- slave->dev->name);
+ printk(KERN_WARNING DRV_NAME ": %s: Warning: duplex changed "
+ "for uninitialized port on %s\n",
+ slave->dev->master->name, slave->dev->name);
return;
}
@@ -2285,8 +2300,9 @@ void bond_3ad_handle_link_change(struct slave *slave, char link)
// if slave is null, the whole port is not initialized
if (!port->slave) {
- printk(KERN_WARNING DRV_NAME ": Warning: link status changed for uninitialized port on %s\n",
- slave->dev->name);
+ printk(KERN_WARNING DRV_NAME ": Warning: %s: link status changed for "
+ "uninitialized port on %s\n",
+ slave->dev->master->name, slave->dev->name);
return;
}
@@ -2363,7 +2379,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
}
if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
- printk(KERN_DEBUG "ERROR: bond_3ad_get_active_agg_info failed\n");
+ printk(KERN_DEBUG DRV_NAME ": %s: Error: "
+ "bond_3ad_get_active_agg_info failed\n", dev->name);
goto out;
}
@@ -2372,7 +2389,9 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
if (slaves_in_agg == 0) {
/*the aggregator is empty*/
- printk(KERN_DEBUG "ERROR: active aggregator is empty\n");
+ printk(KERN_DEBUG DRV_NAME ": %s: Error: active "
+ "aggregator is empty\n",
+ dev->name);
goto out;
}
@@ -2390,7 +2409,8 @@ int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev)
}
if (slave_agg_no >= 0) {
- printk(KERN_ERR DRV_NAME ": Error: Couldn't find a slave to tx on for aggregator ID %d\n", agg_id);
+ printk(KERN_ERR DRV_NAME ": %s: Error: Couldn't find a slave to tx on "
+ "for aggregator ID %d\n", dev->name, agg_id);
goto out;
}
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index f8fce39611972f18fefdd8524368955425d84466..96dfb90c52529d01e6cf83a35aa7bb4e7bf85079 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -207,7 +207,7 @@ static int tlb_initialize(struct bonding *bond)
bond_info->tx_hashtbl = kmalloc(size, GFP_KERNEL);
if (!bond_info->tx_hashtbl) {
printk(KERN_ERR DRV_NAME
- ": Error: %s: Failed to allocate TLB hash table\n",
+ ": %s: Error: Failed to allocate TLB hash table\n",
bond->dev->name);
_unlock_tx_hashtbl(bond);
return -1;
@@ -513,7 +513,8 @@ static void rlb_update_client(struct rlb_client_info *client_info)
client_info->mac_dst);
if (!skb) {
printk(KERN_ERR DRV_NAME
- ": Error: failed to create an ARP packet\n");
+ ": %s: Error: failed to create an ARP packet\n",
+ client_info->slave->dev->master->name);
continue;
}
@@ -523,7 +524,8 @@ static void rlb_update_client(struct rlb_client_info *client_info)
skb = vlan_put_tag(skb, client_info->vlan_id);
if (!skb) {
printk(KERN_ERR DRV_NAME
- ": Error: failed to insert VLAN tag\n");
+ ": %s: Error: failed to insert VLAN tag\n",
+ client_info->slave->dev->master->name);
continue;
}
}
@@ -606,8 +608,9 @@ static void rlb_req_update_subnet_clients(struct bonding *bond, u32 src_ip)
if (!client_info->slave) {
printk(KERN_ERR DRV_NAME
- ": Error: found a client with no channel in "
- "the client's hash table\n");
+ ": %s: Error: found a client with no channel in "
+ "the client's hash table\n",
+ bond->dev->name);
continue;
}
/*update all clients using this src_ip, that are not assigned
@@ -807,7 +810,7 @@ static int rlb_initialize(struct bonding *bond)
bond_info->rx_hashtbl = kmalloc(size, GFP_KERNEL);
if (!bond_info->rx_hashtbl) {
printk(KERN_ERR DRV_NAME
- ": Error: %s: Failed to allocate RLB hash table\n",
+ ": %s: Error: Failed to allocate RLB hash table\n",
bond->dev->name);
_unlock_rx_hashtbl(bond);
return -1;
@@ -927,7 +930,8 @@ static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[])
skb = vlan_put_tag(skb, vlan->vlan_id);
if (!skb) {
printk(KERN_ERR DRV_NAME
- ": Error: failed to insert VLAN tag\n");
+ ": %s: Error: failed to insert VLAN tag\n",
+ bond->dev->name);
continue;
}
}
@@ -956,11 +960,11 @@ static int alb_set_slave_mac_addr(struct slave *slave, u8 addr[], int hw)
s_addr.sa_family = dev->type;
if (dev_set_mac_address(dev, &s_addr)) {
printk(KERN_ERR DRV_NAME
- ": Error: dev_set_mac_address of dev %s failed! ALB "
+ ": %s: Error: dev_set_mac_address of dev %s failed! ALB "
"mode requires that the base driver support setting "
"the hw address also when the network device's "
"interface is open\n",
- dev->name);
+ dev->master->name, dev->name);
return -EOPNOTSUPP;
}
return 0;
@@ -1153,16 +1157,16 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav
bond->alb_info.rlb_enabled);
printk(KERN_WARNING DRV_NAME
- ": Warning: the hw address of slave %s is in use by "
+ ": %s: Warning: the hw address of slave %s is in use by "
"the bond; giving it the hw address of %s\n",
- slave->dev->name, free_mac_slave->dev->name);
+ bond->dev->name, slave->dev->name, free_mac_slave->dev->name);
} else if (has_bond_addr) {
printk(KERN_ERR DRV_NAME
- ": Error: the hw address of slave %s is in use by the "
+ ": %s: Error: the hw address of slave %s is in use by the "
"bond; couldn't find a slave with a free hw address to "
"give it (this should not have happened)\n",
- slave->dev->name);
+ bond->dev->name, slave->dev->name);
return -EFAULT;
}
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 94cec3cf2a1304b994b8279daf0cd01cbf7c2dbc..7838522d5093aebeaa74f55a1d9c9f7b7717d695 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -910,7 +910,7 @@ static void bond_vlan_rx_add_vid(struct net_device *bond_dev, uint16_t vid)
res = bond_add_vlan(bond, vid);
if (res) {
printk(KERN_ERR DRV_NAME
- ": %s: Failed to add vlan id %d\n",
+ ": %s: Error: Failed to add vlan id %d\n",
bond_dev->name, vid);
}
}
@@ -944,7 +944,7 @@ static void bond_vlan_rx_kill_vid(struct net_device *bond_dev, uint16_t vid)
res = bond_del_vlan(bond, vid);
if (res) {
printk(KERN_ERR DRV_NAME
- ": %s: Failed to remove vlan id %d\n",
+ ": %s: Error: Failed to remove vlan id %d\n",
bond_dev->name, vid);
}
}
@@ -1644,8 +1644,8 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
slave_dev->do_ioctl == NULL) {
printk(KERN_WARNING DRV_NAME
- ": Warning : no link monitoring support for %s\n",
- slave_dev->name);
+ ": %s: Warning: no link monitoring support for %s\n",
+ bond_dev->name, slave_dev->name);
}
/* bond must be initialized by bond_open() before enslaving */
@@ -1666,17 +1666,17 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
dprintk("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
if (!list_empty(&bond->vlan_list)) {
printk(KERN_ERR DRV_NAME
- ": Error: cannot enslave VLAN "
+ ": %s: Error: cannot enslave VLAN "
"challenged slave %s on VLAN enabled "
- "bond %s\n", slave_dev->name,
+ "bond %s\n", bond_dev->name, slave_dev->name,
bond_dev->name);
return -EPERM;
} else {
printk(KERN_WARNING DRV_NAME
- ": Warning: enslaved VLAN challenged "
+ ": %s: Warning: enslaved VLAN challenged "
"slave %s. Adding VLANs will be blocked as "
"long as %s is part of bond %s\n",
- slave_dev->name, slave_dev->name,
+ bond_dev->name, slave_dev->name, slave_dev->name,
bond_dev->name);
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
}
@@ -1706,12 +1706,11 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
if (slave_dev->set_mac_address == NULL) {
printk(KERN_ERR DRV_NAME
- ": Error: The slave device you specified does "
- "not support setting the MAC address.\n");
- printk(KERN_ERR
- "Your kernel likely does not support slave devices.\n");
-
- res = -EOPNOTSUPP;
+ ": %s: Error: The slave device you specified does "
+ "not support setting the MAC address. "
+ "Your kernel likely does not support slave "
+ "devices.\n", bond_dev->name);
+ res = -EOPNOTSUPP;
goto err_undo_flags;
}
@@ -1827,21 +1826,21 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
* the messages for netif_carrier.
*/
printk(KERN_WARNING DRV_NAME
- ": Warning: MII and ETHTOOL support not "
+ ": %s: Warning: MII and ETHTOOL support not "
"available for interface %s, and "
"arp_interval/arp_ip_target module parameters "
"not specified, thus bonding will not detect "
"link failures! see bonding.txt for details.\n",
- slave_dev->name);
+ bond_dev->name, slave_dev->name);
} else if (link_reporting == -1) {
/* unable get link status using mii/ethtool */
printk(KERN_WARNING DRV_NAME
- ": Warning: can't get link status from "
+ ": %s: Warning: can't get link status from "
"interface %s; the network driver associated "
"with this interface does not support MII or "
"ETHTOOL link status reporting, thus miimon "
"has no effect on this interface.\n",
- slave_dev->name);
+ bond_dev->name, slave_dev->name);
}
}
@@ -1868,15 +1867,15 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
if (bond_update_speed_duplex(new_slave) &&
(new_slave->link != BOND_LINK_DOWN)) {
printk(KERN_WARNING DRV_NAME
- ": Warning: failed to get speed and duplex from %s, "
+ ": %s: Warning: failed to get speed and duplex from %s, "
"assumed to be 100Mb/sec and Full.\n",
- new_slave->dev->name);
+ bond_dev->name, new_slave->dev->name);
if (bond->params.mode == BOND_MODE_8023AD) {
- printk(KERN_WARNING
- "Operation of 802.3ad mode requires ETHTOOL "
+ printk(KERN_WARNING DRV_NAME
+ ": %s: Warning: Operation of 802.3ad mode requires ETHTOOL "
"support in base driver for proper aggregator "
- "selection.\n");
+ "selection.\n", bond_dev->name);
}
}
@@ -2010,7 +2009,7 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de
if (!(slave_dev->flags & IFF_SLAVE) ||
(slave_dev->master != bond_dev)) {
printk(KERN_ERR DRV_NAME
- ": Error: %s: cannot release %s.\n",
+ ": %s: Error: cannot release %s.\n",
bond_dev->name, slave_dev->name);
return -EINVAL;
}
@@ -2031,11 +2030,12 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de
ETH_ALEN);
if (!mac_addr_differ && (bond->slave_cnt > 1)) {
printk(KERN_WARNING DRV_NAME
- ": Warning: the permanent HWaddr of %s "
+ ": %s: Warning: the permanent HWaddr of %s "
"- %02X:%02X:%02X:%02X:%02X:%02X - is "
"still in use by %s. Set the HWaddr of "
"%s to a different address to avoid "
"conflicts.\n",
+ bond_dev->name,
slave_dev->name,
slave->perm_hwaddr[0],
slave->perm_hwaddr[1],
@@ -2111,19 +2111,20 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
} else {
printk(KERN_WARNING DRV_NAME
- ": Warning: clearing HW address of %s while it "
+ ": %s: Warning: clearing HW address of %s while it "
"still has VLANs.\n",
- bond_dev->name);
+ bond_dev->name, bond_dev->name);
printk(KERN_WARNING DRV_NAME
- ": When re-adding slaves, make sure the bond's "
- "HW address matches its VLANs'.\n");
+ ": %s: When re-adding slaves, make sure the bond's "
+ "HW address matches its VLANs'.\n",
+ bond_dev->name);
}
} else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
!bond_has_challenged_slaves(bond)) {
printk(KERN_INFO DRV_NAME
- ": last VLAN challenged slave %s "
+ ": %s: last VLAN challenged slave %s "
"left bond %s. VLAN blocking is removed\n",
- slave_dev->name, bond_dev->name);
+ bond_dev->name, slave_dev->name, bond_dev->name);
bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
}
@@ -2274,12 +2275,13 @@ static int bond_release_all(struct net_device *bond_dev)
bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
} else {
printk(KERN_WARNING DRV_NAME
- ": Warning: clearing HW address of %s while it "
+ ": %s: Warning: clearing HW address of %s while it "
"still has VLANs.\n",
- bond_dev->name);
+ bond_dev->name, bond_dev->name);
printk(KERN_WARNING DRV_NAME
- ": When re-adding slaves, make sure the bond's "
- "HW address matches its VLANs'.\n");
+ ": %s: When re-adding slaves, make sure the bond's "
+ "HW address matches its VLANs'.\n",
+ bond_dev->name);
}
printk(KERN_INFO DRV_NAME
@@ -2596,8 +2598,11 @@ static void bond_mii_monitor(struct net_device *bond_dev)
break;
default:
/* Should not happen */
- printk(KERN_ERR "bonding: Error: %s Illegal value (link=%d)\n",
- slave->dev->name, slave->link);
+ printk(KERN_ERR DRV_NAME
+ ": %s: Error: %s Illegal value (link=%d)\n",
+ bond_dev->name,
+ slave->dev->name,
+ slave->link);
goto out;
} /* end of switch (slave->link) */
@@ -4397,8 +4402,9 @@ static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
if (!skb2) {
printk(KERN_ERR DRV_NAME
- ": Error: bond_xmit_broadcast(): "
- "skb_clone() failed\n");
+ ": %s: Error: bond_xmit_broadcast(): "
+ "skb_clone() failed\n",
+ bond_dev->name);
continue;
}
@@ -4467,7 +4473,8 @@ static inline void bond_set_mode_ops(struct bonding *bond, int mode)
default:
/* Should never happen, mode already checked */
printk(KERN_ERR DRV_NAME
- ": Error: Unknown bonding mode %d\n",
+ ": %s: Error: Unknown bonding mode %d\n",
+ bond_dev->name,
mode);
break;
}
@@ -4670,7 +4677,7 @@ static int bond_check_params(struct bond_params *params)
if (max_bonds < 1 || max_bonds > INT_MAX) {
printk(KERN_WARNING DRV_NAME
": Warning: max_bonds (%d) not in range %d-%d, so it "
- "was reset to BOND_DEFAULT_MAX_BONDS (%d)",
+ "was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
max_bonds, 1, INT_MAX, BOND_DEFAULT_MAX_BONDS);
max_bonds = BOND_DEFAULT_MAX_BONDS;
}