From 698ca47e8dba93f4b001b06b4c7037b09ac6eb09 Mon Sep 17 00:00:00 2001
From: Clifford Wolf <clifford@clifford.at>
Date: Tue, 17 Jul 2007 04:04:06 -0700
Subject: [PATCH] spi_mpc83xx.c underclocking hotfix
The MPC83xx SPI controller clock divider can divide the system clock by not
more then 1024. The spi_mpc83xx driver does not check this and silently
writes garbage to the SPI controller registers when asked to run at lower
frequencies. I've tried to run the SPI on a 266MHz MPC8349E with 100kHz
for debugging a bus problem and suddenly was confronted with a 2nd problem
to debug.. ;-)
The patch adds an additional check which avoids writing garbage to the SPI
controller registers and warn the user about it. This might help others to
avoid simmilar problems.
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
drivers/spi/spi_mpc83xx.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index 9cdbc12278e5..bbd51bc88a60 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -158,6 +158,12 @@ static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
if ((mpc83xx_spi->sysclk / spi->max_speed_hz) >= 64) {
u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 64);
+ if (pm > 0x0f) {
+ printk(KERN_WARNING "MPC83xx SPI: SPICLK can't be less then a SYSCLK/1024!\n"
+ "Requested SPICLK is %d Hz. Will use %d Hz instead.\n",
+ spi->max_speed_hz, mpc83xx_spi->sysclk / 1024);
+ pm = 0x0f;
+ }
regval |= SPMODE_PM(pm) | SPMODE_DIV16;
} else {
u8 pm = mpc83xx_spi->sysclk / (spi->max_speed_hz * 4);
--
GitLab