diff --git a/Documentation/devicetree/bindings/reset/sirf,rstc.txt b/Documentation/devicetree/bindings/reset/sirf,rstc.txt
new file mode 100644
index 0000000000000000000000000000000000000000..0505de742d30d4eb963985858343594dd60d0cab
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/sirf,rstc.txt
@@ -0,0 +1,42 @@
+CSR SiRFSoC Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "sirf,prima2-rstc" or "sirf,marco-rstc"
+- reg: should be register base and length as documented in the
+ datasheet
+- #reset-cells: 1, see below
+
+example:
+
+rstc: reset-controller@88010000 {
+ compatible = "sirf,prima2-rstc";
+ reg = <0x88010000 0x1000>;
+ #reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The reset controller(rstc) manages various reset sources. This module provides
+reset signals for most blocks in system. Those device nodes should specify the
+reset line on the rstc in their resets property, containing a phandle to the
+rstc device node and a RESET_INDEX specifying which module to reset, as described
+in reset.txt.
+
+For SiRFSoC, RESET_INDEX is just reset_bit defined in SW_RST0 and SW_RST1 registers.
+For modules whose rest_bit is in SW_RST0, its RESET_INDEX is 0~31. For modules whose
+rest_bit is in SW_RST1, its RESET_INDEX is 32~63.
+
+example:
+
+vpp@90020000 {
+ compatible = "sirf,prima2-vpp";
+ reg = <0x90020000 0x10000>;
+ interrupts = <31>;
+ clocks = <&clks 35>;
+ resets = <&rstc 6>;
+};
diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt
index 9c5d19ac935c335d88400b6724aaff75b5c99712..17c1042b2df895da595191fa8d8acd132fd546e8 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt
@@ -13,6 +13,8 @@ Required properties:
Optional properties:
- atmel,use-dma-rx: use of PDC or DMA for receiving data
- atmel,use-dma-tx: use of PDC or DMA for transmitting data
+- rts-gpios: specify a GPIO for RTS line. It will use specified PIO instead of the peripheral
+ function pin for the USART RTS feature. If unsure, don't specify this property.
- add dma bindings for dma transfer:
- dmas: DMA specifier, consisting of a phandle to DMA controller node,
memory peripheral interface and USART DMA channel ID, FIFO configuration.
@@ -33,6 +35,7 @@ Example:
clock-names = "usart";
atmel,use-dma-rx;
atmel,use-dma-tx;
+ rts-gpios = <&pioD 15 0>;
};
- use DMA:
diff --git a/MAINTAINERS b/MAINTAINERS
index ebb6c6f30c569dbebb759b0d0dc63266be361a9d..74e33b8913bf10a4b9ef263182ed0e48886bc43b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1175,6 +1175,14 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.arm.linux.org.uk/
S: Maintained
+ARM/QUALCOMM SUPPORT
+M: Kumar Gala <galak@codeaurora.org>
+M: David Brown <davidb@codeaurora.org>
+L: linux-arm-msm@vger.kernel.org
+S: Maintained
+F: arch/arm/mach-qcom/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
+
ARM/RADISYS ENP2611 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1894,7 +1902,7 @@ M: Stephen Warren <swarren@wwwdotorg.org>
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
S: Maintained
-F: arch/arm/mach-bcm2835/
+F: arch/arm/mach-bcm/board_bcm2835.c
F: arch/arm/boot/dts/bcm2835*
F: arch/arm/configs/bcm2835_defconfig
F: drivers/*/*bcm2835*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 79bea0b34d1f0c561b895777d608a87c604f30f3..83912d0251ca138a816f74ed77de295e7e426d2e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -309,9 +309,11 @@ choice
config ARCH_MULTIPLATFORM
bool "Allow multiple platforms to be selected"
depends on MMU
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
@@ -425,9 +427,6 @@ config ARCH_EFM32
select ARCH_REQUIRE_GPIOLIB
select AUTO_ZRELADDR
select ARM_NVIC
- # CLKSRC_MMIO is wrong here, but needed until a proper fix is merged,
- # i.e. CLKSRC_EFM32 selecting CLKSRC_MMIO
- select CLKSRC_MMIO
select CLKSRC_OF
select COMMON_CLK
select CPU_V7M
@@ -659,9 +658,8 @@ config ARCH_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_MSM_NODT
- bool "Qualcomm MSM"
- select ARCH_MSM
+config ARCH_MSM
+ bool "Qualcomm MSM (non-multiplatform)"
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK
select GENERIC_CLOCKEVENTS
@@ -921,16 +919,18 @@ config ARCH_MULTI_V4_V5
config ARCH_MULTI_V6
bool "ARMv6 based platforms (ARM11)"
select ARCH_MULTI_V6_V7
- select CPU_V6
+ select CPU_V6K
config ARCH_MULTI_V7
bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
default y
select ARCH_MULTI_V6_V7
select CPU_V7
+ select HAVE_SMP
config ARCH_MULTI_V6_V7
bool
+ select MIGHT_HAVE_CACHE_L2X0
config ARCH_MULTI_CPU_AUTO
def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
@@ -938,6 +938,13 @@ config ARCH_MULTI_CPU_AUTO
endmenu
+config ARCH_VIRT
+ bool "Dummy Virtual Machine" if ARCH_MULTI_V7
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_PSCI
+ select HAVE_ARM_ARCH_TIMER
+
#
# This is sorted alphabetically by mach-* pathname. However, plat-*
# Kconfigs may be included either alphabetically (according to the
@@ -949,8 +956,6 @@ source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-bcm/Kconfig"
-source "arch/arm/mach-bcm2835/Kconfig"
-
source "arch/arm/mach-berlin/Kconfig"
source "arch/arm/mach-clps711x/Kconfig"
@@ -1018,6 +1023,8 @@ source "arch/arm/plat-pxa/Kconfig"
source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-qcom/Kconfig"
+
source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
@@ -1061,8 +1068,6 @@ source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-vexpress/Kconfig"
source "arch/arm/plat-versatile/Kconfig"
-source "arch/arm/mach-virt/Kconfig"
-
source "arch/arm/mach-vt8500/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 0531da8e5216e442ee1f9c8878e4fb9d84611581..76ee27829c3402f4b6a19b0fcbaaa0e4b335ed54 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -956,7 +956,7 @@ config DEBUG_STI_UART
config DEBUG_MSM_UART
bool
- depends on ARCH_MSM
+ depends on ARCH_MSM || ARCH_QCOM
config DEBUG_LL_INCLUDE
string
@@ -1145,7 +1145,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
config DEBUG_UNCOMPRESS
bool
- depends on ARCH_MULTIPLATFORM || ARCH_MSM
+ depends on ARCH_MULTIPLATFORM || ARCH_MSM || ARCH_EXYNOS
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
help
@@ -1161,7 +1161,8 @@ config DEBUG_UNCOMPRESS
config UNCOMPRESS_INCLUDE
string
- default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM
+ default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
+ ARCH_EXYNOS || ARCH_EFM32
default "mach/uncompress.h"
config EARLY_PRINTK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index fddf4beaee45d32a19fa020527bfc573f3b33cbd..41c1931f01552589e7939a9e8d95a9d3ad94bf53 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -143,7 +143,6 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
# by CONFIG_* macro name.
machine-$(CONFIG_ARCH_AT91) += at91
machine-$(CONFIG_ARCH_BCM) += bcm
-machine-$(CONFIG_ARCH_BCM2835) += bcm2835
machine-$(CONFIG_ARCH_BERLIN) += berlin
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
@@ -180,6 +179,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
machine-$(CONFIG_ARCH_PXA) += pxa
+machine-$(CONFIG_ARCH_QCOM) += qcom
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
@@ -199,7 +199,6 @@ machine-$(CONFIG_ARCH_U300) += u300
machine-$(CONFIG_ARCH_U8500) += ux500
machine-$(CONFIG_ARCH_VERSATILE) += versatile
machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
-machine-$(CONFIG_ARCH_VIRT) += virt
machine-$(CONFIG_ARCH_VT8500) += vt8500
machine-$(CONFIG_ARCH_W90X900) += w90x900
machine-$(CONFIG_ARCH_ZYNQ) += zynq
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d3cb0126a102c4941e88cafb0f2d692821c4bd3f..ec4dd7c3ed374e843423026e0c8041c296002a44 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -12,6 +12,8 @@ dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
+# sam9261
+dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb
# sam9263
dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
@@ -29,6 +31,8 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
# sam9n12
dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
+# sam9rl
+dtb-$(CONFIG_ARCH_AT91) += at91sam9rlek.dtb
# sam9x5
dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb
@@ -119,9 +123,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
- qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
@@ -234,6 +235,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
dra7-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
+ qcom-msm8960-cdp.dtb \
+ qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..e21dda0e8986574b2531c1675eca1b4de164822d
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -0,0 +1,735 @@
+/*
+ * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
+ *
+ * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clk/at91.h>
+
+/ {
+ model = "Atmel AT91SAM9261 family SoC";
+ compatible = "atmel,at91sam9261";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ tcb0 = &tcb0;
+ i2c0 = &i2c0;
+ ssc0 = &ssc0;
+ ssc1 = &ssc1;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x08000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usb0: ohci@00500000 {
+ compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x00500000 0x100000>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&ohci_clk>, <&hclk0>, <&uhpck>;
+ clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+ status = "disabled";
+ };
+
+ fb0: fb@0x00600000 {
+ compatible = "atmel,at91sam9261-lcdc";
+ reg = <0x00600000 0x1000>;
+ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fb>;
+ clocks = <&lcd_clk>, <&hclk1>;
+ clock-names = "lcdc_clk", "hclk";
+ status = "disabled";
+ };
+
+ nand0: nand@40000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x10000000>;
+ atmel,nand-addr-offset = <22>;
+ atmel,nand-cmd-offset = <21>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+
+ gpios = <&pioC 15 GPIO_ACTIVE_HIGH>,
+ <&pioC 14 GPIO_ACTIVE_HIGH>,
+ <0>;
+ status = "disabled";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ tcb0: timer@fffa0000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffa0000 0x100>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
+ <18 IRQ_TYPE_LEVEL_HIGH 0>,
+ <19 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
+ };
+
+ usb1: gadget@fffa4000 {
+ compatible = "atmel,at91rm9200-udc";
+ reg = <0xfffa4000 0x4000>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&usb>, <&udc_clk>, <&udpck>;
+ clock-names = "usb_clk", "udc_clk", "udpck";
+ status = "disabled";
+ };
+
+ mmc0: mmc@fffa8000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfffa8000 0x600>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
+ status = "disabled";
+ };
+
+ i2c0: i2c@fffac000 {
+ compatible = "atmel,at91sam9261-i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_twi>;
+ reg = <0xfffac000 0x100>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&twi0_clk>;
+ status = "disabled";
+ };
+
+ usart0: serial@fffb0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb0000 0x200>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ usart1: serial@fffb4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb4000 0x200>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ usart2: serial@fffb8000{
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb8000 0x200>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ ssc0: ssc@fffbc000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfffbc000 0x4000>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ status = "disabled";
+ };
+
+ ssc1: ssc@fffc0000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfffc0000 0x4000>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ status = "disabled";
+ };
+
+ spi0: spi@fffc8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffc8000 0x200>;
+ cs-gpios = <0>, <0>, <0>, <0>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
+ status = "disabled";
+ };
+
+ spi1: spi@fffcc000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffcc000 0x200>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
+ status = "disabled";
+ };
+
+ ramc: ramc@ffffea00 {
+ compatible = "atmel,at91sam9260-sdramc";
+ reg = <0xffffea00 0x200>;
+ };
+
+ matrix: matrix@ffffee00 {
+ compatible = "atmel,at91sam9260-bus-matrix";
+ reg = <0xffffee00 0x200>;
+ };
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <3>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <29 30 31>;
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x600>;
+
+ atmel,mux-mask =
+ /* A B */
+ <0xffffffff 0xfffffff7>, /* pioA */
+ <0xffffffff 0xfffffff4>, /* pioB */
+ <0xffffffff 0xffffff07>; /* pioC */
+
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins =
+ <AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins =
+ <AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins =
+ <AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins =
+ <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart2_rts: usart2_rts-0 {
+ atmel,pins =
+ <AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart2_cts: usart2_cts-0 {
+ atmel,pins =
+ <AT91_PIOA 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_clk: mmc0_clk-0 {
+ atmel,pins =
+ <AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+ atmel,pins =
+ <AT91_PIOA 1 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOA 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ ssc1 {
+ pinctrl_ssc1_tx: ssc1_tx-0 {
+ atmel,pins =
+ <AT91_PIOA 17 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_ssc1_rx: ssc1_rx-0 {
+ atmel,pins =
+ <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ spi1 {
+ pinctrl_spi1: spi1-0 {
+ atmel,pins =
+ <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ tcb0 {
+ pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+ atmel,pins = <AT91_PIOC 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+ atmel,pins = <AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+ atmel,pins = <AT91_PIOC 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+ atmel,pins = <AT91_PIOC 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+ atmel,pins = <AT91_PIOC 21 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+ atmel,pins = <AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+ atmel,pins = <AT91_PIOC 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+ atmel,pins = <AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+ atmel,pins = <AT91_PIOC 24 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ i2c0 {
+ pinctrl_i2c_bitbang: i2c-0-bitbang {
+ atmel,pins =
+ <AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>,
+ <AT91_PIOA 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ pinctrl_i2c_twi: i2c-0-twi {
+ atmel,pins =
+ <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ fb {
+ pinctrl_fb: fb-0 {
+ atmel,pins =
+ <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 17 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOB 24 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOB 25 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOB 26 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOB 27 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOB 28 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91rm9200-pmc";
+ reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ clk32k: slck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&clk32k>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>;
+ };
+
+ pllb: pllbck {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKB>;
+ clocks = <&main>;
+ reg = <1>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
+ atmel,clk-output-range = <0 94000000>;
+ atmel,clk-divisors = <1 2 4 3>;
+ };
+
+ usb: usbck {
+ compatible = "atmel,at91rm9200-clk-usb";
+ #clock-cells = <0>;
+ atmel,clk-divisors = <1 2 4 3>;
+ clocks = <&pllb>;
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ uhpck: uhpck {
+ #clock-cells = <0>;
+ reg = <6>;
+ clocks = <&usb>;
+ };
+
+ udpck: udpck {
+ #clock-cells = <0>;
+ reg = <7>;
+ clocks = <&usb>;
+ };
+
+ hclk0: hclk0 {
+ #clock-cells = <0>;
+ reg = <16>;
+ clocks = <&mck>;
+ };
+
+ hclk1: hclk1 {
+ #clock-cells = <0>;
+ reg = <17>;
+ clocks = <&mck>;
+ };
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ udc_clk: udc_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ twi0_clk: twi0_clk {
+ reg = <11>;
+ #clock-cells = <0>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ spi1_clk: spi1_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ tc0_clk: tc0_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ tc1_clk: tc1_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ tc2_clk: tc2_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ ohci_clk: ohci_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ lcd_clk: lcd_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+ };
+ };
+
+ rstc@fffffd00 {
+ compatible = "atmel,at91sam9260-rstc";
+ reg = <0xfffffd00 0x10>;
+ };
+
+ shdwc@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ };
+
+ pit: timer@fffffd30 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffd30 0xf>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&mck>;
+ };
+
+ watchdog@fffffd40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffd40 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ status = "disabled";
+ };
+ };
+ };
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_bitbang>;
+ gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
+ <&pioA 8 GPIO_ACTIVE_HIGH>; /* scl */
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
new file mode 100644
index 0000000000000000000000000000000000000000..2ce527e70c7abb45f37e759377f3ee9400f69ee8
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -0,0 +1,211 @@
+/*
+ * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
+ *
+ * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+/dts-v1/;
+#include "at91sam9261.dtsi"
+
+/ {
+ model = "Atmel at91sam9261ek";
+ compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ usb0: ohci@00500000 {
+ status = "okay";
+ };
+
+ fb0: fb@0x00600000 {
+ display = <&display0>;
+ atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ display0: display {
+ bits-per-pixel = <16>;
+ atmel,lcdcon-backlight;
+ atmel,dmacon = <0x1>;
+ atmel,lcdcon2 = <0x80008002>;
+ atmel,guard-time = <1>;
+ atmel,lcd-wiring-mode = "BRG";
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <4965000>;
+ hactive = <240>;
+ vactive = <320>;
+ hback-porch = <1>;
+ hfront-porch = <33>;
+ vback-porch = <1>;
+ vfront-porch = <0>;
+ hsync-len = <5>;
+ vsync-len = <1>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+
+ apb {
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ spi0: spi@fffc8000 {
+ cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
+ status = "okay";
+
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ reg = <0>;
+ spi-max-frequency = <15000000>;
+ };
+
+ tsc2046@0 {
+ reg = <2>;
+ compatible = "ti,ads7843";
+ interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
+ spi-max-frequency = <3000000>;
+ pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+ ti,x-min = /bits/ 16 <150>;
+ ti,x-max = /bits/ 16 <3830>;
+ ti,y-min = /bits/ 16 <190>;
+ ti,y-max = /bits/ 16 <3830>;
+ ti,vref-delay-usecs = /bits/ 16 <450>;
+ ti,x-plate-ohms = /bits/ 16 <450>;
+ ti,y-plate-ohms = /bits/ 16 <250>;
+ ti,pressure-max = /bits/ 16 <15000>;
+ ti,debounce-rep = /bits/ 16 <0>;
+ ti,debounce-tol = /bits/ 16 <65535>;
+ ti,debounce-max = /bits/ 16 <1>;
+
+ linux,wakeup;
+ };
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ watchdog@fffffd40 {
+ status = "okay";
+ };
+
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds8 {
+ label = "ds8";
+ gpios = <&pioA 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ };
+
+ ds7 {
+ label = "ds7";
+ gpios = <&pioA 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "nand-disk";
+ };
+
+ ds1 {
+ label = "ds1";
+ gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button_0 {
+ label = "button_0";
+ gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
+ linux,code = <256>;
+ gpio-key,wakeup;
+ };
+
+ button_1 {
+ label = "button_1";
+ gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+ linux,code = <257>;
+ gpio-key,wakeup;
+ };
+
+ button_2 {
+ label = "button_2";
+ gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+ linux,code = <258>;
+ gpio-key,wakeup;
+ };
+
+ button_3 {
+ label = "button_3";
+ gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+ linux,code = <259>;
+ gpio-key,wakeup;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..63e1784d272c556974023fcfd7d46ba7a0510e3d
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -0,0 +1,802 @@
+/*
+ * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
+ *
+ * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/clk/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Atmel AT91SAM9RL family SoC";
+ compatible = "atmel,at91sam9rl", "atmel,at91sam9";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ tcb0 = &tcb0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ ssc0 = &ssc0;
+ ssc1 = &ssc1;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x04000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ nand0: nand@40000000 {
+ compatible = "atmel,at91rm9200-nand";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x40000000 0x10000000>,
+ <0xffffe800 0x200>;
+ atmel,nand-addr-offset = <21>;
+ atmel,nand-cmd-offset = <22>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ gpios = <&pioD 17 GPIO_ACTIVE_HIGH>,
+ <&pioB 6 GPIO_ACTIVE_HIGH>,
+ <0>;
+ status = "disabled";
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ tcb0: timer@fffa0000 {
+ compatible = "atmel,at91rm9200-tcb";
+ reg = <0xfffa0000 0x100>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
+ <17 IRQ_TYPE_LEVEL_HIGH 0>,
+ <18 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
+ clock-names = "t0_clk", "t1_clk", "t2_clk";
+ };
+
+ mmc0: mmc@fffa4000 {
+ compatible = "atmel,hsmci";
+ reg = <0xfffa4000 0x600>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ clocks = <&mci0_clk>;
+ clock-names = "mci_clk";
+ status = "disabled";
+ };
+
+ i2c0: i2c@fffa8000 {
+ compatible = "atmel,at91sam9260-i2c";
+ reg = <0xfffa8000 0x100>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&twi0_clk>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@fffac000 {
+ compatible = "atmel,at91sam9260-i2c";
+ reg = <0xfffac000 0x100>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ usart0: serial@fffb0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb0000 0x200>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart0>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ usart1: serial@fffb4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb4000 0x200>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart1>;
+ clocks = <&usart1_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ usart2: serial@fffb8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb8000 0x200>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart2>;
+ clocks = <&usart2_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ usart3: serial@fffbc000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffbc000 0x200>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usart3>;
+ clocks = <&usart3_clk>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ ssc0: ssc@fffc0000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfffc0000 0x4000>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ status = "disabled";
+ };
+
+ ssc1: ssc@fffc4000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfffc4000 0x4000>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+ status = "disabled";
+ };
+
+ spi0: spi@fffcc000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffcc000 0x200>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&spi0_clk>;
+ clock-names = "spi_clk";
+ status = "disabled";
+ };
+
+ ramc0: ramc@ffffea00 {
+ compatible = "atmel,at91sam9260-sdramc";
+ reg = <0xffffea00 0x200>;
+ };
+
+ aic: interrupt-controller@fffff000 {
+ #interrupt-cells = <3>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ reg = <0xfffff000 0x200>;
+ atmel,external-irqs = <31>;
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_dbgu>;
+ clocks = <&mck>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ ranges = <0xfffff400 0xfffff400 0x800>;
+
+ atmel,mux-mask =
+ /* A B */
+ <0xffffffff 0xe05c6738>, /* pioA */
+ <0xffffffff 0x0000c780>, /* pioB */
+ <0xffffffff 0xe3ffff0e>, /* pioC */
+ <0x003fffff 0x0001ff3c>; /* pioD */
+
+ /* shared pinctrl settings */
+ dbgu {
+ pinctrl_dbgu: dbgu-0 {
+ atmel,pins =
+ <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ i2c_gpio0 {
+ pinctrl_i2c_gpio0: i2c_gpio0-0 {
+ atmel,pins =
+ <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+ <AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+ };
+ };
+
+ i2c_gpio1 {
+ pinctrl_i2c_gpio1: i2c_gpio1-0 {
+ atmel,pins =
+ <AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
+ <AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0_clk: mmc0_clk-0 {
+ atmel,pins =
+ <AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+ atmel,pins =
+ <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+ };
+
+ nand {
+ pinctrl_nand: nand-0 {
+ atmel,pins =
+ <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_nand0_ale_cle: nand_ale_cle-0 {
+ atmel,pins =
+ <AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_nand0_oe_we: nand_oe_we-0 {
+ atmel,pins =
+ <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_nand0_cs: nand_cs-0 {
+ atmel,pins =
+ <AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ ssc0 {
+ pinctrl_ssc0_tx: ssc0_tx-0 {
+ atmel,pins =
+ <AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_ssc0_rx: ssc0_rx-0 {
+ atmel,pins =
+ <AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ ssc1 {
+ pinctrl_ssc1_tx: ssc1_tx-0 {
+ atmel,pins =
+ <AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_ssc1_rx: ssc1_rx-0 {
+ atmel,pins =
+ <AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
+ <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ spi0 {
+ pinctrl_spi0: spi0-0 {
+ atmel,pins =
+ <AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ tcb0 {
+ pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
+ atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
+ atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
+ atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
+ atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
+ atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
+ atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
+ atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
+ atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
+ atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usart0 {
+ pinctrl_usart0: usart0-0 {
+ atmel,pins =
+ <AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+ };
+
+ pinctrl_usart0_rts: usart0_rts-0 {
+ atmel,pins =
+ <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart0_cts: usart0_cts-0 {
+ atmel,pins =
+ <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
+ atmel,pins =
+ <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+ <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart0_dcd: usart0_dcd-0 {
+ atmel,pins =
+ <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart0_ri: usart0_ri-0 {
+ atmel,pins =
+ <AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart0_sck: usart0_sck-0 {
+ atmel,pins =
+ <AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usart1 {
+ pinctrl_usart1: usart1-0 {
+ atmel,pins =
+ <AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart1_rts: usart1_rts-0 {
+ atmel,pins =
+ <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart1_cts: usart1_cts-0 {
+ atmel,pins =
+ <AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart1_sck: usart1_sck-0 {
+ atmel,pins =
+ <AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usart2 {
+ pinctrl_usart2: usart2-0 {
+ atmel,pins =
+ <AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart2_rts: usart2_rts-0 {
+ atmel,pins =
+ <AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart2_cts: usart2_cts-0 {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart2_sck: usart2_sck-0 {
+ atmel,pins =
+ <AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ usart3 {
+ pinctrl_usart3: usart3-0 {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+ <AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart3_rts: usart3_rts-0 {
+ atmel,pins =
+ <AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart3_cts: usart3_cts-0 {
+ atmel,pins =
+ <AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+
+ pinctrl_usart3_sck: usart3_sck-0 {
+ atmel,pins =
+ <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+ };
+ };
+
+ pioA: gpio@fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
+ };
+
+ pioD: gpio@fffffa00 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioD_clk>;
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91sam9g45-pmc";
+ reg = <0xfffffc00 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <1>;
+
+ clk32k: slck {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ main: mainck {
+ compatible = "atmel,at91rm9200-clk-main";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MOSCS>;
+ clocks = <&clk32k>;
+ };
+
+ plla: pllack {
+ compatible = "atmel,at91rm9200-clk-pll";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_LOCKA>;
+ clocks = <&main>;
+ reg = <0>;
+ atmel,clk-input-range = <1000000 32000000>;
+ #atmel,pll-clk-output-range-cells = <4>;
+ atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>;
+ };
+
+ utmi: utmick {
+ compatible = "atmel,at91sam9x5-clk-utmi";
+ #clock-cells = <0>;
+ interrupt-parent = <&pmc>;
+ interrupts = <AT91_PMC_LOCKU>;
+ clocks = <&main>;
+ };
+
+ mck: masterck {
+ compatible = "atmel,at91rm9200-clk-master";
+ #clock-cells = <0>;
+ interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
+ clocks = <&clk32k>, <&main>, <&plla>, <&utmi>;
+ atmel,clk-output-range = <0 94000000>;
+ atmel,clk-divisors = <1 2 4 3>;
+ };
+
+ prog: progck {
+ compatible = "atmel,at91rm9200-clk-programmable";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupt-parent = <&pmc>;
+ clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>;
+
+ prog0: prog0 {
+ #clock-cells = <0>;
+ reg = <0>;
+ interrupts = <AT91_PMC_PCKRDY(0)>;
+ };
+
+ prog1: prog1 {
+ #clock-cells = <0>;
+ reg = <1>;
+ interrupts = <AT91_PMC_PCKRDY(1)>;
+ };
+ };
+
+ systemck {
+ compatible = "atmel,at91rm9200-clk-system";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pck0: pck0 {
+ #clock-cells = <0>;
+ reg = <8>;
+ clocks = <&prog0>;
+ };
+
+ pck1: pck1 {
+ #clock-cells = <0>;
+ reg = <9>;
+ clocks = <&prog1>;
+ };
+
+ };
+
+ periphck {
+ compatible = "atmel,at91rm9200-clk-peripheral";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mck>;
+
+ pioA_clk: pioA_clk {
+ #clock-cells = <0>;
+ reg = <2>;
+ };
+
+ pioB_clk: pioB_clk {
+ #clock-cells = <0>;
+ reg = <3>;
+ };
+
+ pioC_clk: pioC_clk {
+ #clock-cells = <0>;
+ reg = <4>;
+ };
+
+ pioD_clk: pioD_clk {
+ #clock-cells = <0>;
+ reg = <5>;
+ };
+
+ usart0_clk: usart0_clk {
+ #clock-cells = <0>;
+ reg = <6>;
+ };
+
+ usart1_clk: usart1_clk {
+ #clock-cells = <0>;
+ reg = <7>;
+ };
+
+ usart2_clk: usart2_clk {
+ #clock-cells = <0>;
+ reg = <8>;
+ };
+
+ usart3_clk: usart3_clk {
+ #clock-cells = <0>;
+ reg = <9>;
+ };
+
+ mci0_clk: mci0_clk {
+ #clock-cells = <0>;
+ reg = <10>;
+ };
+
+ twi0_clk: twi0_clk {
+ #clock-cells = <0>;
+ reg = <11>;
+ };
+
+ twi1_clk: twi1_clk {
+ #clock-cells = <0>;
+ reg = <12>;
+ };
+
+ spi0_clk: spi0_clk {
+ #clock-cells = <0>;
+ reg = <13>;
+ };
+
+ ssc0_clk: ssc0_clk {
+ #clock-cells = <0>;
+ reg = <14>;
+ };
+
+ ssc1_clk: ssc1_clk {
+ #clock-cells = <0>;
+ reg = <15>;
+ };
+
+ tc0_clk: tc0_clk {
+ #clock-cells = <0>;
+ reg = <16>;
+ };
+
+ tc1_clk: tc1_clk {
+ #clock-cells = <0>;
+ reg = <17>;
+ };
+
+ tc2_clk: tc2_clk {
+ #clock-cells = <0>;
+ reg = <18>;
+ };
+
+ pwm_clk: pwm_clk {
+ #clock-cells = <0>;
+ reg = <19>;
+ };
+
+ adc_clk: adc_clk {
+ #clock-cells = <0>;
+ reg = <20>;
+ };
+
+ dma0_clk: dma0_clk {
+ #clock-cells = <0>;
+ reg = <21>;
+ };
+
+ udphs_clk: udphs_clk {
+ #clock-cells = <0>;
+ reg = <22>;
+ };
+
+ lcd_clk: lcd_clk {
+ #clock-cells = <0>;
+ reg = <23>;
+ };
+ };
+ };
+
+ rstc@fffffd00 {
+ compatible = "atmel,at91sam9260-rstc";
+ reg = <0xfffffd00 0x10>;
+ };
+
+ shdwc@fffffd10 {
+ compatible = "atmel,at91sam9260-shdwc";
+ reg = <0xfffffd10 0x10>;
+ };
+
+ pit: timer@fffffd30 {
+ compatible = "atmel,at91sam9260-pit";
+ reg = <0xfffffd30 0xf>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&mck>;
+ };
+
+ watchdog@fffffd40 {
+ compatible = "atmel,at91sam9260-wdt";
+ reg = <0xfffffd40 0x10>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ status = "disabled";
+ };
+ };
+ };
+
+ i2c@0 {
+ compatible = "i2c-gpio";
+ gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
+ <&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_gpio0>;
+ status = "disabled";
+ };
+
+ i2c@1 {
+ compatible = "i2c-gpio";
+ gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
+ <&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
+ i2c-gpio,sda-open-drain;
+ i2c-gpio,scl-open-drain;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_gpio1>;
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
new file mode 100644
index 0000000000000000000000000000000000000000..cddb37825fad5adc5990b1cbfa216853ce62b3bb
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -0,0 +1,157 @@
+/*
+ * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
+ *
+ * Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
+ *
+ * Licensed under GPLv2 only
+ */
+/dts-v1/;
+#include "at91sam9rl.dtsi"
+
+/ {
+ model = "Atmel at91sam9rlek";
+ compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt = <1>;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+
+ apb {
+ mmc0: mmc@fffa4000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot0_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usart0: serial@fffb0000 {
+ pinctrl-0 = <
+ &pinctrl_usart0
+ &pinctrl_usart0_rts
+ &pinctrl_usart0_cts>;
+ status = "okay";
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ pinctrl@fffff400 {
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <AT91_PIOA 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ main: mainck {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ watchdog@fffffd40 {
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds1 {
+ label = "ds1";
+ gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
+ };
+
+ ds2 {
+ label = "ds2";
+ gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
+ };
+
+ ds3 {
+ label = "ds3";
+ gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ right_click {
+ label = "right_click";
+ gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
+ linux,code = <273>;
+ gpio-key,wakeup;
+ };
+
+ left_click {
+ label = "left_click";
+ gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
+ linux,code = <272>;
+ gpio-key,wakeup;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
index 0c81dc945aed91f202ad374fe8d1d0d1aaeeca0c..55d3f79c2ef599f3d898905b86f16161cafc3e80 100644
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ b/arch/arm/boot/dts/atlas6.dtsi
@@ -65,9 +65,10 @@ clks: clock-controller@88000000 {
#clock-cells = <1>;
};
- reset-controller@88010000 {
+ rstc: reset-controller@88010000 {
compatible = "sirf,prima2-rstc";
reg = <0x88010000 0x1000>;
+ #reset-cells = <1>;
};
rsc-controller@88020000 {
diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi
index 1579c3491ccd5fe5ee0cce9792d519d739843fe4..0c9647d28765469cb1b0ba87bc6c6d85c9565acf 100644
--- a/arch/arm/boot/dts/marco.dtsi
+++ b/arch/arm/boot/dts/marco.dtsi
@@ -58,9 +58,10 @@ rstc-iobg {
#size-cells = <1>;
ranges = <0xc2000000 0xc2000000 0x1000000>;
- reset-controller@c2000000 {
+ rstc: reset-controller@c2000000 {
compatible = "sirf,marco-rstc";
reg = <0xc2000000 0x10000>;
+ #reset-cells = <1>;
};
};
diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi
index 8582ae41a5834e99ed26e5edc6f55971d2fa1d0c..20145526cd7b23fe649751643b950ef03a6b7b82 100644
--- a/arch/arm/boot/dts/prima2.dtsi
+++ b/arch/arm/boot/dts/prima2.dtsi
@@ -76,9 +76,10 @@ clks: clock-controller@88000000 {
#clock-cells = <1>;
};
- reset-controller@88010000 {
+ rstc: reset-controller@88010000 {
compatible = "sirf,prima2-rstc";
reg = <0x88010000 0x1000>;
+ #reset-cells = <1>;
};
rsc-controller@88020000 {
diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
index 68a72f5507b9a88431641b715dd9a974f6b2cf3f..169bad90dac965640039c181cd4ab67cf7c8bec2 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -1,63 +1,6 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+#include "qcom-msm8660.dtsi"
/ {
model = "Qualcomm MSM8660 SURF";
compatible = "qcom,msm8660-surf", "qcom,msm8660";
- interrupt-parent = <&intc>;
-
- intc: interrupt-controller@2080000 {
- compatible = "qcom,msm-8660-qgic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = < 0x02080000 0x1000 >,
- < 0x02081000 0x1000 >;
- };
-
- timer@2000000 {
- compatible = "qcom,scss-timer", "qcom,msm-timer";
- interrupts = <1 0 0x301>,
- <1 1 0x301>,
- <1 2 0x301>;
- reg = <0x02000000 0x100>;
- clock-frequency = <27000000>,
- <32768>;
- cpu-offset = <0x40000>;
- };
-
- msmgpio: gpio@800000 {
- compatible = "qcom,msm-gpio";
- reg = <0x00800000 0x4000>;
- gpio-controller;
- #gpio-cells = <2>;
- ngpio = <173>;
- interrupts = <0 16 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gcc: clock-controller@900000 {
- compatible = "qcom,gcc-msm8660";
- #clock-cells = <1>;
- #reset-cells = <1>;
- reg = <0x900000 0x4000>;
- };
-
- serial@19c40000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x19c40000 0x1000>,
- <0x19c00000 0x1000>;
- interrupts = <0 195 0x0>;
- clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
- clock-names = "core", "iface";
- };
-
- qcom,ssbi@500000 {
- compatible = "qcom,ssbi";
- reg = <0x500000 0x1000>;
- qcom,controller-type = "pmic-arbiter";
- };
};
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..69d6c4edea3008bb05e6e2236d9e56bbf1e10531
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -0,0 +1,63 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+
+/ {
+ model = "Qualcomm MSM8660";
+ compatible = "qcom,msm8660";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller@2080000 {
+ compatible = "qcom,msm-8660-qgic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = < 0x02080000 0x1000 >,
+ < 0x02081000 0x1000 >;
+ };
+
+ timer@2000000 {
+ compatible = "qcom,scss-timer", "qcom,msm-timer";
+ interrupts = <1 0 0x301>,
+ <1 1 0x301>,
+ <1 2 0x301>;
+ reg = <0x02000000 0x100>;
+ clock-frequency = <27000000>,
+ <32768>;
+ cpu-offset = <0x40000>;
+ };
+
+ msmgpio: gpio@800000 {
+ compatible = "qcom,msm-gpio";
+ reg = <0x00800000 0x4000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpio = <173>;
+ interrupts = <0 16 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gcc: clock-controller@900000 {
+ compatible = "qcom,gcc-msm8660";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x900000 0x4000>;
+ };
+
+ serial@19c40000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <0 195 0x0>;
+ clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x500000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+ };
+};
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 7c30de4fa3022eb3a2bb7f6ec46c88d6482f6dc2..a58fb88315f69063256fe962e674751307609f82 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -1,70 +1,6 @@
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include "qcom-msm8960.dtsi"
/ {
model = "Qualcomm MSM8960 CDP";
compatible = "qcom,msm8960-cdp", "qcom,msm8960";
- interrupt-parent = <&intc>;
-
- intc: interrupt-controller@2000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = < 0x02000000 0x1000 >,
- < 0x02002000 0x1000 >;
- };
-
- timer@200a000 {
- compatible = "qcom,kpss-timer", "qcom,msm-timer";
- interrupts = <1 1 0x301>,
- <1 2 0x301>,
- <1 3 0x301>;
- reg = <0x0200a000 0x100>;
- clock-frequency = <27000000>,
- <32768>;
- cpu-offset = <0x80000>;
- };
-
- msmgpio: gpio@800000 {
- compatible = "qcom,msm-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- ngpio = <150>;
- interrupts = <0 16 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x800000 0x4000>;
- };
-
- gcc: clock-controller@900000 {
- compatible = "qcom,gcc-msm8960";
- #clock-cells = <1>;
- #reset-cells = <1>;
- reg = <0x900000 0x4000>;
- };
-
- clock-controller@4000000 {
- compatible = "qcom,mmcc-msm8960";
- reg = <0x4000000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- serial@16440000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x16440000 0x1000>,
- <0x16400000 0x1000>;
- interrupts = <0 154 0x0>;
- clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
- clock-names = "core", "iface";
- };
-
- qcom,ssbi@500000 {
- compatible = "qcom,ssbi";
- reg = <0x500000 0x1000>;
- qcom,controller-type = "pmic-arbiter";
- };
};
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..ff002826552aa4f854d649d4c9d9e131f12bceda
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -0,0 +1,70 @@
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+
+/ {
+ model = "Qualcomm MSM8960";
+ compatible = "qcom,msm8960";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller@2000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = < 0x02000000 0x1000 >,
+ < 0x02002000 0x1000 >;
+ };
+
+ timer@200a000 {
+ compatible = "qcom,kpss-timer", "qcom,msm-timer";
+ interrupts = <1 1 0x301>,
+ <1 2 0x301>,
+ <1 3 0x301>;
+ reg = <0x0200a000 0x100>;
+ clock-frequency = <27000000>,
+ <32768>;
+ cpu-offset = <0x80000>;
+ };
+
+ msmgpio: gpio@800000 {
+ compatible = "qcom,msm-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpio = <150>;
+ interrupts = <0 16 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x800000 0x4000>;
+ };
+
+ gcc: clock-controller@900000 {
+ compatible = "qcom,gcc-msm8960";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x900000 0x4000>;
+ };
+
+ clock-controller@4000000 {
+ compatible = "qcom,mmcc-msm8960";
+ reg = <0x4000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ serial@16440000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16440000 0x1000>,
+ <0x16400000 0x1000>;
+ interrupts = <0 154 0x0>;
+ clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x500000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+ };
+};
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index 0b4e9b5210d8dc29435990acd6f0a37b223c62c8..300ded9acbe92a3e5ac05955abe00d5d547092b0 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -16,10 +16,12 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_SOC_AT91RM9200=y
CONFIG_SOC_AT91SAM9260=y
+CONFIG_SOC_AT91SAM9261=y
CONFIG_SOC_AT91SAM9263=y
CONFIG_SOC_AT91SAM9G45=y
CONFIG_SOC_AT91SAM9X5=y
CONFIG_SOC_AT91SAM9N12=y
+CONFIG_SOC_AT91SAM9RL=y
CONFIG_MACH_AT91RM9200_DT=y
CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_TIMER_HZ=128
@@ -119,6 +121,7 @@ CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_SERIO is not set
CONFIG_LEGACY_PTY_COUNT=4
CONFIG_SERIAL_ATMEL=y
diff --git a/arch/arm/configs/at91sam9260_9g20_defconfig b/arch/arm/configs/at91sam9260_9g20_defconfig
index 2cd832918e9ccb7a51d9893c2c6f4e17366b284d..c4c160fc87918463ebdf7360130499a69af376c7 100644
--- a/arch/arm/configs/at91sam9260_9g20_defconfig
+++ b/arch/arm/configs/at91sam9260_9g20_defconfig
@@ -3,6 +3,7 @@
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
@@ -30,15 +31,12 @@ CONFIG_MACH_AT91SAM9_DT=y
CONFIG_AT91_SLOW_CLOCK=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
CONFIG_AUTO_ZRELADDR=y
-CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@@ -57,15 +55,14 @@ CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_MISC_DEVICES=y
CONFIG_EEPROM_AT25=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
@@ -112,8 +109,6 @@ CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PROCFS is not set
CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig
index 7b6f131cecd6701f553de8f4e479c0c92de952c5..85f846ae9ff21e77d8126bda271660f108c0cc75 100644
--- a/arch/arm/configs/at91sam9rl_defconfig
+++ b/arch/arm/configs/at91sam9rl_defconfig
@@ -1,8 +1,8 @@
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
CONFIG_MODULES=y
@@ -14,20 +14,23 @@ CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9RL=y
CONFIG_MACH_AT91SAM9RLEK=y
# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
+CONFIG_AUTO_ZRELADDR=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_DATAFLASH=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=4
@@ -66,6 +69,7 @@ CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
CONFIG_CRAMFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index f43392dc2dcf659c1b1ac4d8a6b524e21f106cd6..0302d293fba0e54d3b236ceb94418b6471922523 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -31,6 +31,7 @@ CONFIG_OPROFILE=y
CONFIG_JUMP_LABEL=y
CONFIG_ARCH_MULTI_V6=y
# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM2835=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index 9e8c8316d6b074004686ab7f86cb133c59729767..0facf9da047c2787a4dd7a85a6108964b9a4776f 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -15,7 +15,6 @@ CONFIG_ARCH_CDB89712=y
CONFIG_ARCH_CLEP7312=y
CONFIG_ARCH_EDB7211=y
CONFIG_ARCH_P720T=y
-CONFIG_ARCH_FORTUNET=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
@@ -27,7 +26,6 @@ CONFIG_INET=y
# CONFIG_IPV6 is not set
CONFIG_IRDA=y
CONFIG_IRTTY_SIR=y
-CONFIG_EP7211_DONGLE=y
# CONFIG_WIRELESS is not set
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
@@ -58,6 +56,7 @@ CONFIG_CS89x0_PLATFORM=y
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
+CONFIG_SERIAL_CLPS711X=y
CONFIG_SERIAL_CLPS711X_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
index 83f2aa83899c4b14cede7dd798178655884c951f..f6fcc67ef06ef3882ebc7a97f4397c2ff19ed5e5 100644
--- a/arch/arm/include/asm/timex.h
+++ b/arch/arm/include/asm/timex.h
@@ -12,12 +12,6 @@
#ifndef _ASMARM_TIMEX_H
#define _ASMARM_TIMEX_H
-#ifdef CONFIG_ARCH_MULTIPLATFORM
-#define CLOCK_TICK_RATE 1000000
-#else
-#include <mach/timex.h>
-#endif
-
typedef unsigned long cycles_t;
#define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; })
diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S
index f3a9cff6d5d44f421bd6107220d6da6f0cd61e25..8d8d922e5e4458fc7529057559367d8528301389 100644
--- a/arch/arm/include/debug/samsung.S
+++ b/arch/arm/include/debug/samsung.S
@@ -9,7 +9,7 @@
* published by the Free Software Foundation.
*/
-#include <plat/regs-serial.h>
+#include <linux/serial_s3c.h>
/* The S5PV210/S5PC110 implementations are as belows. */
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 9968f208b7df32de93756ad94bb177dd6bd4d4f4..b2d2cf4dc0523fcc4175db241b61e66017e72ea0 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -131,7 +131,6 @@ config SOC_AT91SAM9261
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
- select AT91_USE_OLD_CLK
select HAVE_AT91_USB_CLK
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
@@ -149,7 +148,6 @@ config SOC_AT91SAM9RL
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
select SOC_AT91SAM9
- select AT91_USE_OLD_CLK
select HAVE_AT91_UTMI
config SOC_AT91SAM9G45
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index e47f5fd232f5f91e9a42b83beb8a21faddc6ac65..787bb50a4dff442361b587a190283a659a059de6 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -21,6 +21,7 @@
#include <mach/at91rm9200.h>
#include <mach/at91_st.h>
#include <mach/cpu.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "soc.h"
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 3ebc9792560cebed75a53883e42e774742c5660c..f3f19f21352aa94275755f882226027d58a39287 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -21,6 +21,7 @@
#include <mach/at91rm9200.h>
#include <mach/at91rm9200_mc.h>
#include <mach/at91_ramc.h>
+#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
@@ -922,6 +923,7 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -960,6 +962,7 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -987,9 +990,10 @@ static inline void configure_usart0_pins(unsigned pins)
if (pins & ATMEL_UART_RTS) {
/*
* AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
- * We need to drive the pin manually. Default is off (RTS is active low).
+ * We need to drive the pin manually. The serial driver will driver
+ * this to high when initializing.
*/
- at91_set_gpio_output(AT91_PIN_PA21, 1);
+ uart0_data.rts_gpio = AT91_PIN_PA21;
}
}
@@ -1009,6 +1013,7 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1060,6 +1065,7 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -1103,6 +1109,7 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index bc7b363a3083bfdab31591786fe38991c199e2dc..7fd13aef982725ea0e869d5b76ddd4fe2530eb67 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -31,6 +31,7 @@
#include <asm/mach/time.h>
#include <mach/at91_st.h>
+#include <mach/hardware.h>
static unsigned long last_crtr;
static u32 irqmask;
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 6c821e5621590b5e920d330a2d895b196b7530b9..c3d22be73b7cc99bc638192dce47f25ed0919821 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -21,6 +21,7 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9260.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "at91_rstc.h"
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 1630ae64d3fb9bf4cdddf93ca29b3733110c7876..8b1b0a8700259961d04617ee064eb036679f8acd 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -25,6 +25,7 @@
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
#include <mach/at91_adc.h>
+#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
@@ -819,6 +820,7 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -857,6 +859,7 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -908,6 +911,7 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -951,6 +955,7 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -994,6 +999,7 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
@@ -1037,6 +1043,7 @@ static struct resource uart4_resources[] = {
static struct atmel_uart_data uart4_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart4_dmamask = DMA_BIT_MASK(32);
@@ -1075,6 +1082,7 @@ static struct resource uart5_resources[] = {
static struct atmel_uart_data uart5_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart5_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 6276b4c1acfed2943354809b8b5f6ddd37bba9f9..fb164a5d04a906b09cb44872f7be7edf1784737a 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -20,15 +20,18 @@
#include <asm/system_misc.h>
#include <mach/cpu.h>
#include <mach/at91sam9261.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
+
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
@@ -189,6 +192,23 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
+ /* more lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
+ CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &hck0),
+ CLKDEV_CON_DEV_ID("hclk", "600000.fb", &hck1),
+ CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk),
+ CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -247,7 +267,9 @@ static void __init at91sam9261_register_clocks(void)
clk_register(&hck0);
clk_register(&hck1);
}
-
+#else
+#define at91sam9261_register_clocks NULL
+#endif
/* --------------------------------------------------------------------
* GPIO
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index b2a34740146aaab4d3af99b741979c670be6402e..80e35895d28fb74f06d852d5712cb4c283b56a47 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -25,6 +25,7 @@
#include <mach/at91sam9261_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
@@ -880,6 +881,7 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -918,6 +920,7 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -961,6 +964,7 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1004,6 +1008,7 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 37b90f4b990c3ce4e5360c526ca979810277121c..f30290572293273e94b9523ce0072f43cf607fc6 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -19,6 +19,7 @@
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/at91sam9263.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "at91_rstc.h"
@@ -223,6 +224,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk),
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk),
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 4aeadddbc18108918b883150bef49b3a770eeb42..43d53d6156dd7fd60384da67afb3784cf08c88f4 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -24,6 +24,7 @@
#include <mach/at91sam9263_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
#include "board.h"
#include "generic.h"
@@ -1324,6 +1325,7 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -1362,6 +1364,7 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -1405,6 +1408,7 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1448,6 +1452,7 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 0f04ffe9c5a87c2afb4f90b02d75b86b70fd722b..0a9e2fc8f7968996fcd5d994e4e797eaac76ea3d 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -19,6 +19,7 @@
#include <linux/of_irq.h>
#include <asm/mach/time.h>
+#include <mach/hardware.h>
#define AT91_PIT_MR 0x00 /* Mode Register */
#define AT91_PIT_PITIEN (1 << 25) /* Timer Interrupt Enable */
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 2f455ce35268513d5abaafc954a54be76ef48a26..5e6f498db0a8d1bbda3bd2bad51f8dd4ce1b4576 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -20,6 +20,7 @@
#include <asm/system_misc.h>
#include <mach/at91sam9g45.h>
#include <mach/cpu.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "soc.h"
@@ -284,6 +285,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("pioE", &pioDE_clk),
/* Fake adc clock */
CLKDEV_CON_ID("adc_clk", &tsc_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index cb36fa872d305d6f22b9133d48d3bdaaa678789d..77b04c2edd783485d89f229a5c9c075bc68ab468 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -32,6 +32,7 @@
#include <mach/at91sam9_smc.h>
#include <linux/platform_data/dma-atmel.h>
#include <mach/atmel-mci.h>
+#include <mach/hardware.h>
#include <media/atmel-isi.h>
@@ -1587,6 +1588,7 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0,
+ .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -1625,6 +1627,7 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -1668,6 +1671,7 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1711,6 +1715,7 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -1754,6 +1759,7 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c
index 4ef088c62eabdf6661a801f495e795912f250cd5..f2ea7b0a02da8f95073fe01d36d048c712a88712 100644
--- a/arch/arm/mach-at91/at91sam9n12.c
+++ b/arch/arm/mach-at91/at91sam9n12.c
@@ -182,6 +182,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
/* additional fake clock for macb_hclk */
CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk),
CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk),
+ CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk),
};
/*
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 3651517abedfb1214386cabd93d7ab82844d16aa..57f12d86c0e6166c38019b7b7f6acac75078451b 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -20,18 +20,20 @@
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include <mach/at91sam9rl.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "at91_rstc.h"
#include "soc.h"
#include "generic.h"
-#include "clock.h"
#include "sam9_smc.h"
#include "pm.h"
/* --------------------------------------------------------------------
* Clocks
* -------------------------------------------------------------------- */
+#if defined(CONFIG_OLD_CLK_AT91)
+#include "clock.h"
/*
* The peripheral clocks.
@@ -196,6 +198,24 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
CLKDEV_CON_ID("pioD", &pioD_clk),
+ /* more lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk),
+ CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
+ CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
+ CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
+ CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffc8000.pwm", &pwm_clk),
+ CLKDEV_CON_DEV_ID(NULL, "ffffc800.pwm", &pwm_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
+ CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
@@ -238,6 +258,7 @@ static void __init at91sam9rl_register_clocks(void)
clk_register(&pck0);
clk_register(&pck1);
}
+#endif
/* --------------------------------------------------------------------
* GPIO
@@ -350,6 +371,8 @@ AT91_SOC_START(at91sam9rl)
.default_irq_priority = at91sam9rl_default_irq_priority,
.extern_irq = (1 << AT91SAM9RL_ID_IRQ0),
.ioremap_registers = at91sam9rl_ioremap_registers,
+#if defined(CONFIG_OLD_CLK_AT91)
.register_clocks = at91sam9rl_register_clocks,
+#endif
.init = at91sam9rl_initialize,
AT91_SOC_END
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index a698bdab2cce682fee2983e0942d5bc2126139e4..428fc412aaf1e223da13a0d675aea08681391210 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -21,6 +21,7 @@
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91_matrix.h>
#include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
#include <linux/platform_data/dma-atmel.h>
#include "board.h"
@@ -956,6 +957,7 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
+ .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -994,6 +996,7 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -1045,6 +1048,7 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1088,6 +1092,7 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -1131,6 +1136,7 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
+ .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index 3e8ec26e39dcc7404120fab8cbbfb0e168d9fa44..9ad781d5ee7cc9d5cd76650d395dffac9c98e0ca 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -253,6 +253,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
+ CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk),
};
/*
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index bad94b84a46f7b72c9fe5bc182c1c0fbd19861b1..7523f1cdfe1d8a56a29087a4fceaa5cab9fabbd3 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -19,7 +19,7 @@
#include <asm/mach/arch.h>
#include <mach/at91x40.h>
#include <mach/at91_st.h>
-#include <mach/timex.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "generic.h"
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index c0e637adf65d2555adddaa1897730fc4021d04d7..07d0bf2ac2dac18d2ad7b2c83e201134fc778bb8 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -25,6 +25,7 @@
#include <linux/time.h>
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/at91x40.h>
#include <asm/mach/time.h>
#include "at91_tc.h"
diff --git a/arch/arm/mach-at91/board-dt-sam9.c b/arch/arm/mach-at91/board-dt-sam9.c
index 3dab868b02fad864fbc2ee537c7b846d563889b4..575b0be66ca8958028c656e3289b26368fb401a4 100644
--- a/arch/arm/mach-at91/board-dt-sam9.c
+++ b/arch/arm/mach-at91/board-dt-sam9.c
@@ -13,6 +13,7 @@
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/clk-provider.h>
#include <asm/setup.h>
#include <asm/irq.h>
@@ -25,6 +26,14 @@
#include "generic.h"
+static void __init sam9_dt_timer_init(void)
+{
+#if defined(CONFIG_COMMON_CLK)
+ of_clk_init(NULL);
+#endif
+ at91sam926x_pit_init();
+}
+
static const struct of_device_id irq_of_match[] __initconst = {
{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
@@ -43,7 +52,7 @@ static const char *at91_dt_board_compat[] __initdata = {
DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
/* Maintainer: Atmel */
- .init_time = at91sam926x_pit_init,
+ .init_time = sam9_dt_timer_init,
.map_io = at91_map_io,
.handle_irq = at91_aic_handle_irq,
.init_early = at91_dt_initialize,
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index c1d61d247790b72fc009547d61bd49a6cc3797a5..416bae8435eeaaeb526eb79bf363cfc5fccb764b 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -31,6 +31,7 @@
#include <asm/mach/arch.h>
#include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "board.h"
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 65c0d6b5ecba751bc19435083fd7c44162032ff9..5f25fa54eb93e9887bea2bced02521941c53a63c 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -30,6 +30,7 @@
#include <asm/mach/arch.h>
#include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "board.h"
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 869cbecf00b7eee51c78b4621019ac40ea2edacf..e4a5ac17cdbcb79c020635431ba1ebdf7057c062 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -26,6 +26,7 @@
#include <asm/mach/arch.h>
#include <mach/at91sam9_smc.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "board.h"
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index 90680217064eea8e1248f909e201596887a2c2f5..38dca2bb027f602b8a568f62c6528d04f34bcb3f 100644
--- a/arch/arm/mach-at91/include/mach/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -55,4 +55,6 @@
#define AT91_PS_CR (AT91_PS + 0) /* PS Control register */
#define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */
+#define AT91X40_MASTER_CLOCK 40000000
+
#endif /* AT91X40_H */
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
deleted file mode 100644
index 5e917a66edd7937fb7a8d4f622ff5a95a78031da..0000000000000000000000000000000000000000
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/timex.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_AT91X40
-
-#define AT91X40_MASTER_CLOCK 40000000
-#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
-
-#else
-
-#define CLOCK_TICK_RATE 12345678
-
-#endif
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 590b52dea9f7a2c1da84440dd3c556ea06efcd8f..8bda1cefdf96ad500f84641cbcb8fa300c3b13df 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -27,6 +27,7 @@
#include <asm/mach/irq.h>
#include <mach/cpu.h>
+#include <mach/hardware.h>
#include "at91_aic.h"
#include "generic.h"
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index b1aa6a9b3bd13a7f02ff4e8c4a80a03698e22c27..396d05c8b5705fa78608b9b81a71d9efb5efb857 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -16,12 +16,7 @@ config ARCH_BCM_MOBILE
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_GIC
- select CPU_V7
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- select GENERIC_TIME
select GPIO_BCM_KONA
- select SPARSE_IRQ
select TICK_ONESHOT
select CACHE_L2X0
select HAVE_ARM_ARCH_TIMER
@@ -32,6 +27,22 @@ config ARCH_BCM_MOBILE
BCM11130, BCM11140, BCM11351, BCM28145 and
BCM28155 variants.
+config ARCH_BCM2835
+ bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select ARM_ERRATA_411920
+ select ARM_TIMER_SP804
+ select CLKDEV_LOOKUP
+ select CLKSRC_OF
+ select CPU_V6
+ select GENERIC_CLOCKEVENTS
+ select PINCTRL
+ select PINCTRL_BCM2835
+ help
+ This enables support for the Broadcom BCM2835 SoC. This SoC is
+ used in the Raspberry Pi and Roku 2 devices.
+
endmenu
endif
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index c2ccd5a0f77212ee4ba9389448bacba8ddc4faa6..0ad293882079453dd5d44bad084e946802e2fc85 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -11,5 +11,7 @@
# GNU General Public License for more details.
obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
+obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
+
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c
index cb3dc364405c4eec94465adbb503b7763fe4887f..6be54c10f8cb9b8c077e86ff1f9476f7917ce511 100644
--- a/arch/arm/mach-bcm/board_bcm281xx.c
+++ b/arch/arm/mach-bcm/board_bcm281xx.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2012-2013 Broadcom Corporation
+ * Copyright (C) 2012-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -11,64 +11,65 @@
* GNU General Public License for more details.
*/
-#include <linux/of_platform.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
#include <linux/clocksource.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/cache-l2x0.h>
-#include "bcm_kona_smc.h"
#include "kona.h"
-static int __init kona_l2_cache_init(void)
+#define SECWDOG_OFFSET 0x00000000
+#define SECWDOG_RESERVED_MASK 0xe2000000
+#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000
+#define SECWDOG_EN_MASK 0x08000000
+#define SECWDOG_SRSTEN_MASK 0x04000000
+#define SECWDOG_CLKS_SHIFT 20
+#define SECWDOG_COUNT_SHIFT 0
+
+static void bcm281xx_restart(enum reboot_mode mode, const char *cmd)
{
- if (!IS_ENABLED(CONFIG_CACHE_L2X0))
- return 0;
+ uint32_t val;
+ void __iomem *base;
+ struct device_node *np_wdog;
- if (bcm_kona_smc_init() < 0) {
- pr_info("Kona secure API not available. Skipping L2 init\n");
- return 0;
+ np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
+ if (!np_wdog) {
+ pr_emerg("Couldn't find brcm,kona-wdt\n");
+ return;
+ }
+ base = of_iomap(np_wdog, 0);
+ if (!base) {
+ pr_emerg("Couldn't map brcm,kona-wdt\n");
+ return;
}
- bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0);
-
- /*
- * The aux_val and aux_mask have no effect since L2 cache is already
- * enabled. Pass 0s for aux_val and 1s for aux_mask for default value.
- */
- return l2x0_of_init(0, ~0);
-}
-
-static void bcm_board_setup_restart(void)
-{
- struct device_node *np;
+ /* Enable watchdog with short timeout (244us). */
+ val = readl(base + SECWDOG_OFFSET);
+ val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
+ val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
+ (0x15 << SECWDOG_CLKS_SHIFT) |
+ (0x8 << SECWDOG_COUNT_SHIFT);
+ writel(val, base + SECWDOG_OFFSET);
- np = of_find_compatible_node(NULL, NULL, "brcm,bcm11351");
- if (np) {
- if (of_device_is_available(np))
- bcm_kona_setup_restart();
- of_node_put(np);
- }
- /* Restart setup for other boards goes here */
+ /* Wait for reset */
+ while (1);
}
-static void __init board_init(void)
+static void __init bcm281xx_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL,
&platform_bus);
-
- bcm_board_setup_restart();
kona_l2_cache_init();
}
-static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, };
+static const char * const bcm281xx_dt_compat[] = {
+ "brcm,bcm11351", /* Have to use the first number upstreamed */
+ NULL,
+};
-DT_MACHINE_START(BCM11351_DT, "BCM281xx Broadcom Application Processor")
- .init_machine = board_init,
- .restart = bcm_kona_restart,
- .dt_compat = bcm11351_dt_compat,
+DT_MACHINE_START(BCM281XX_DT, "BCM281xx Broadcom Application Processor")
+ .init_machine = bcm281xx_init,
+ .restart = bcm281xx_restart,
+ .dt_compat = bcm281xx_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c
similarity index 100%
rename from arch/arm/mach-bcm2835/bcm2835.c
rename to arch/arm/mach-bcm/board_bcm2835.c
diff --git a/arch/arm/mach-bcm/kona.c b/arch/arm/mach-bcm/kona.c
index 6939d9017f63369c3c34cba1921869ea7a873583..768bc2837bf5985a8c3b2810afc9d0507ab98fd2 100644
--- a/arch/arm/mach-bcm/kona.c
+++ b/arch/arm/mach-bcm/kona.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2013 Broadcom Corporation
+ * Copyright (C) 2012-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -11,55 +11,33 @@
* GNU General Public License for more details.
*/
-#include <linux/of_address.h>
-#include <asm/io.h>
+#include <linux/of_platform.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "bcm_kona_smc.h"
#include "kona.h"
-static void __iomem *watchdog_base;
-
-void bcm_kona_setup_restart(void)
+void __init kona_l2_cache_init(void)
{
- struct device_node *np_wdog;
+ int ret;
- /*
- * The assumption is that whoever calls bcm_kona_setup_restart()
- * also needs a Kona Watchdog Timer entry in Device Tree, i.e. we
- * report an error if the DT entry is missing.
- */
- np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
- if (!np_wdog) {
- pr_err("brcm,kona-wdt not found in DT, reboot disabled\n");
+ if (!IS_ENABLED(CONFIG_CACHE_L2X0))
return;
- }
- watchdog_base = of_iomap(np_wdog, 0);
- WARN(!watchdog_base, "failed to map watchdog base");
- of_node_put(np_wdog);
-}
-
-#define SECWDOG_OFFSET 0x00000000
-#define SECWDOG_RESERVED_MASK 0xE2000000
-#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000
-#define SECWDOG_EN_MASK 0x08000000
-#define SECWDOG_SRSTEN_MASK 0x04000000
-#define SECWDOG_CLKS_SHIFT 20
-#define SECWDOG_LOCK_SHIFT 0
-void bcm_kona_restart(enum reboot_mode mode, const char *cmd)
-{
- uint32_t val;
-
- if (!watchdog_base)
- panic("Watchdog not mapped. Reboot failed.\n");
+ ret = bcm_kona_smc_init();
+ if (ret) {
+ pr_info("Secure API not available (%d). Skipping L2 init.\n",
+ ret);
+ return;
+ }
- /* Enable watchdog2 with very short timeout. */
- val = readl(watchdog_base + SECWDOG_OFFSET);
- val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
- val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
- (0x8 << SECWDOG_CLKS_SHIFT) |
- (0x8 << SECWDOG_LOCK_SHIFT);
- writel(val, watchdog_base + SECWDOG_OFFSET);
+ bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0);
- while (1)
- ;
+ /*
+ * The aux_val and aux_mask have no effect since L2 cache is already
+ * enabled. Pass 0s for aux_val and 1s for aux_mask for default value.
+ */
+ ret = l2x0_of_init(0, ~0);
+ if (ret)
+ pr_err("Couldn't enable L2 cache: %d\n", ret);
}
diff --git a/arch/arm/mach-bcm/kona.h b/arch/arm/mach-bcm/kona.h
index 291eca3e06ff1f0d6e27cd10e2f1d4a29c96cb21..3a7a017c29cd0414c8afd11a97509c18f66dade9 100644
--- a/arch/arm/mach-bcm/kona.h
+++ b/arch/arm/mach-bcm/kona.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2013 Broadcom Corporation
+ * Copyright (C) 2012-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -11,7 +11,4 @@
* GNU General Public License for more details.
*/
-#include <linux/reboot.h>
-
-void bcm_kona_setup_restart(void);
-void bcm_kona_restart(enum reboot_mode mode, const char *cmd);
+void __init kona_l2_cache_init(void);
diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
deleted file mode 100644
index d1f9612f8c1544bebd7ffc9a19001e73cbcfdd05..0000000000000000000000000000000000000000
--- a/arch/arm/mach-bcm2835/Kconfig
+++ /dev/null
@@ -1,15 +0,0 @@
-config ARCH_BCM2835
- bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
- select ARCH_REQUIRE_GPIOLIB
- select ARM_AMBA
- select ARM_ERRATA_411920
- select ARM_TIMER_SP804
- select CLKDEV_LOOKUP
- select CLKSRC_OF
- select CPU_V6
- select GENERIC_CLOCKEVENTS
- select PINCTRL
- select PINCTRL_BCM2835
- help
- This enables support for the Broadcom BCM2835 SoC. This SoC is
- used in the Raspberry Pi and Roku 2 devices.
diff --git a/arch/arm/mach-bcm2835/Makefile b/arch/arm/mach-bcm2835/Makefile
deleted file mode 100644
index 4c3892fe02c3ddf3eb93e5cc66e4526b768ec790..0000000000000000000000000000000000000000
--- a/arch/arm/mach-bcm2835/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += bcm2835.o
diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig
index 7a02d222c37860b554bc9f5a4b609ae457ee0eac..b0cb0722acd254fb411c7616504c9399d396c4b1 100644
--- a/arch/arm/mach-berlin/Kconfig
+++ b/arch/arm/mach-berlin/Kconfig
@@ -1,9 +1,7 @@
config ARCH_BERLIN
bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
select ARM_GIC
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select COMMON_CLK
select DW_APB_ICTL
select DW_APB_TIMER_OF
@@ -16,12 +14,10 @@ config MACH_BERLIN_BG2
select CACHE_L2X0
select CPU_PJ4B
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
config MACH_BERLIN_BG2CD
bool "Marvell Armada 1500-mini (BG2CD)"
select CACHE_L2X0
- select CPU_V7
select HAVE_ARM_TWD if SMP
endmenu
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index bea6295c8c590b3e0da4309e91bf854000907c4f..f711498c180c0e7f1f97037e76c852c5a93dfb8e 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -33,20 +33,6 @@ config ARCH_P720T
Say Y here if you intend to run this kernel on the ARM Prospector
720T.
-config EP72XX_ROM_BOOT
- bool "EP721x/EP731x ROM boot"
- help
- If you say Y here, your CLPS711x-based kernel will use the bootstrap
- mode memory map instead of the normal memory map.
-
- Processors derived from the Cirrus CLPS711X core support two boot
- modes. Normal mode boots from the external memory device at CS0.
- Bootstrap mode rearranges parts of the memory map, placing an
- internal 128 byte bootstrap ROM at CS0. This option performs the
- address map changes required to support booting in this mode.
-
- You almost surely want to say N here.
-
endmenu
endif
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
index c5a8ea6839ef4b870cacd1766f00207f8e8fba51..5d6afda1c0e8251ccfca3a905b5886185c25da88 100644
--- a/arch/arm/mach-clps711x/include/mach/hardware.h
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -38,13 +38,6 @@
#define clps_writel(val,off) writel(val, CLPS711X_VIRT_BASE + (off))
#endif
-/*
- * The physical addresses that the external chip select signals map to is
- * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
- * processors. CONFIG_EP72XX_BOOT_ROM is only available if these
- * processors are in use.
- */
-#ifndef CONFIG_EP72XX_ROM_BOOT
#define CS0_PHYS_BASE (0x00000000)
#define CS1_PHYS_BASE (0x10000000)
#define CS2_PHYS_BASE (0x20000000)
@@ -53,16 +46,6 @@
#define CS5_PHYS_BASE (0x50000000)
#define CS6_PHYS_BASE (0x60000000)
#define CS7_PHYS_BASE (0x70000000)
-#else
-#define CS0_PHYS_BASE (0x70000000)
-#define CS1_PHYS_BASE (0x60000000)
-#define CS2_PHYS_BASE (0x50000000)
-#define CS3_PHYS_BASE (0x40000000)
-#define CS4_PHYS_BASE (0x30000000)
-#define CS5_PHYS_BASE (0x20000000)
-#define CS6_PHYS_BASE (0x10000000)
-#define CS7_PHYS_BASE (0x00000000)
-#endif
#define CLPS711X_SRAM_BASE CS6_PHYS_BASE
#define CLPS711X_SRAM_SIZE (48 * 1024)
diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h
deleted file mode 100644
index de6fd192d1c33b5db0c6715592fd76e2334dcf34..0000000000000000000000000000000000000000
--- a/arch/arm/mach-clps711x/include/mach/timex.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* Bogus value */
-#define CLOCK_TICK_RATE 512000
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index dbf0df8bb0acf916624a2eeef6eb12ab86d9f6a1..dce8decd5d46a387afa7f5da6bb9fdfc727733e1 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -1,9 +1,6 @@
config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
select ARM_GIC
- select CPU_V6K
- select GENERIC_CLOCKEVENTS
- select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
help
diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h
deleted file mode 100644
index 9b885298f1061b357310705e82b23960961ac223..0000000000000000000000000000000000000000
--- a/arch/arm/mach-davinci/include/mach/timex.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * DaVinci timer defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * Alert: Not all timers of the DaVinci family run at a frequency of 27MHz,
- * but we should be fine as long as CLOCK_TICK_RATE or LATCH (see include/
- * linux/jiffies.h) are not used directly in code. Currently none of the
- * code relevant to DaVinci platform depends on these values directly.
- */
-#define CLOCK_TICK_RATE 27000000
-
-#endif /* __ASM_ARCH_TIMEX_H__ */
diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h
deleted file mode 100644
index 251d538541db120a474ed03d17e7d9bd23fe8e1e..0000000000000000000000000000000000000000
--- a/arch/arm/mach-dove/include/mach/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-ebsa110/include/mach/timex.h b/arch/arm/mach-ebsa110/include/mach/timex.h
deleted file mode 100644
index 4fb43b22a102d348645f62529a2ea673ed89308a..0000000000000000000000000000000000000000
--- a/arch/arm/mach-ebsa110/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-ebsa110/include/mach/timex.h
- *
- * Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EBSA110 architecture timex specifications
- */
-
-/*
- * On the EBSA, the clock ticks at weird rates.
- * This is therefore not used to calculate the
- * divisor.
- */
-#define CLOCK_TICK_RATE 47894000
-
diff --git a/arch/arm/mach-efm32/include/mach/entry-macro.S b/arch/arm/mach-efm32/include/mach/entry-macro.S
deleted file mode 100644
index 322159d5ed9107b549e1a00f127000dfd0bd874e..0000000000000000000000000000000000000000
--- a/arch/arm/mach-efm32/include/mach/entry-macro.S
+++ /dev/null
@@ -1,4 +0,0 @@
-/*
- * Empty file waiting for deletion once <mach/entry-macro.S> isn't needed any
- * more. Patch "ARM: v7-M: drop using mach/entry-macro.S" sitting in next.
- */
diff --git a/arch/arm/mach-efm32/include/mach/timex.h b/arch/arm/mach-efm32/include/mach/timex.h
deleted file mode 100644
index 7a8b26da6599fe760396cfa9b81c0e7b8990eb4c..0000000000000000000000000000000000000000
--- a/arch/arm/mach-efm32/include/mach/timex.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * Empty file waiting for deletion once <mach/timex.h> isn't needed any more.
- */
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index fd021ba539fec762141be29e9559adf1ee284913..0e571f1749d6f20c7f599d72b7f72f58e641f04e 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -117,7 +117,7 @@ void __init ep93xx_map_io(void)
#define EP93XX_TIMER4_CLOCK 983040
#define TIMER1_RELOAD ((EP93XX_TIMER123_CLOCK / HZ) - 1)
-#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
+#define TIMER4_TICKS_PER_JIFFY DIV_ROUND_CLOSEST(EP93XX_TIMER4_CLOCK, HZ)
static unsigned int last_jiffy_time;
diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h
deleted file mode 100644
index 6b3503b01fa6252f6858c5412f8d63f1ebd1a46b..0000000000000000000000000000000000000000
--- a/arch/arm/mach-ep93xx/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/timex.h
- */
-
-#define CLOCK_TICK_RATE 983040
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 8d0042c9d4d33518a1eb93f1132e15d09dceaea5..b2f9bb071557da4775f4ed0e40047c1806e66f29 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -20,6 +20,7 @@
#include <clocksource/samsung_pwm.h>
#include <linux/sched.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
@@ -40,7 +41,6 @@
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include "common.h"
#include "regs-pmu.h"
diff --git a/arch/arm/mach-exynos/include/mach/timex.h b/arch/arm/mach-exynos/include/mach/timex.h
deleted file mode 100644
index 6d138750a7080e6de6e5d8c14b129f4616cfd27a..0000000000000000000000000000000000000000
--- a/arch/arm/mach-exynos/include/mach/timex.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/timex.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (c) 2003-2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Based on arch/arm/mach-s5p6442/include/mach/timex.h
- *
- * EXYNOS4 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H __FILE__
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
deleted file mode 100644
index 5d7ce36be46fca8fead7db16418f21d78a4e284e..0000000000000000000000000000000000000000
--- a/arch/arm/mach-exynos/include/mach/uncompress.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS - uncompress code
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H __FILE__
-
-#include <asm/mach-types.h>
-
-#include <mach/map.h>
-#include <plat/uncompress.h>
-
-static unsigned int __raw_readl(unsigned int ptr)
-{
- return *((volatile unsigned int *)ptr);
-}
-
-static void arch_detect_cpu(void)
-{
- u32 chip_id = __raw_readl(EXYNOS_PA_CHIPID);
-
- /*
- * product_id is bits 31:12
- * bits 23:20 describe the exynosX family
- * bits 27:24 describe the exynosX family in exynos5420
- */
- chip_id >>= 20;
-
- if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50)
- uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
- else
- uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
-
- /*
- * For preventing FIFO overrun or infinite loop of UART console,
- * fifo_max should be the minimum fifo size of all of the UART channels
- */
- fifo_mask = S5PV210_UFSTAT_TXMASK;
- fifo_max = 15 << S5PV210_UFSTAT_TXSHIFT;
-}
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 8fd24882f0b1eb5a1963fdb985c577729170e081..fe6570ebbdde961de10602f3e77ad5a7bc09fa8c 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -22,8 +22,6 @@
#include <linux/of_platform.h>
#include <linux/sched.h>
-#include <plat/devs.h>
-
#include "regs-pmu.h"
/*
diff --git a/arch/arm/mach-footbridge/include/mach/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h
deleted file mode 100644
index d0fea9d6d4abf649302c22914b97e6ee66a59096..0000000000000000000000000000000000000000
--- a/arch/arm/mach-footbridge/include/mach/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/mach-footbridge/include/mach/timex.h
- *
- * Copyright (C) 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * EBSA285 architecture timex specifications
- */
-
-/*
- * We assume a constant here; this satisfies the maths in linux/timex.h
- * and linux/time.h. CLOCK_TICK_RATE is actually system dependent, but
- * this must be a constant.
- */
-#define CLOCK_TICK_RATE (50000000/16)
diff --git a/arch/arm/mach-gemini/include/mach/timex.h b/arch/arm/mach-gemini/include/mach/timex.h
deleted file mode 100644
index dc5690ba975c04d9c5eca1f15fd859461fcb78e2..0000000000000000000000000000000000000000
--- a/arch/arm/mach-gemini/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Gemini timex specifications
- *
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-/* When AHB bus frequency is 150MHz */
-#define CLOCK_TICK_RATE 38000000
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index 0aded64a9ebcd68a4213620ace8b5b2f81b53121..830b76e70250bdae8b35db60d21f12662bbf5dbd 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -5,7 +5,6 @@ config ARCH_HIGHBANK
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_HAS_OPP
select ARCH_SUPPORTS_BIG_ENDIAN
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
@@ -14,14 +13,8 @@ config ARCH_HIGHBANK
select ARM_PSCI
select ARM_TIMER_SP804
select CACHE_L2X0
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select MAILBOX
select PL320_MBOX
- select SPARSE_IRQ
- select USE_OF
select ZONE_DMA if ARM_LPAE
diff --git a/arch/arm/mach-hisi/Kconfig b/arch/arm/mach-hisi/Kconfig
index 1abae5f6a4181013a83e286d8ec9b1518179ce39..feee4dbb0760bfb4c4fa604ac1392bad4ae88a72 100644
--- a/arch/arm/mach-hisi/Kconfig
+++ b/arch/arm/mach-hisi/Kconfig
@@ -3,13 +3,9 @@ config ARCH_HI3xxx
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
- select ARCH_WANT_OPTIONAL_GPIOLIB
select CACHE_L2X0
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- select HAVE_ARM_SCU
+ select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select PINCTRL
select PINCTRL_SINGLE
help
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 33567aa5880f423f936aefd5e59dda722c9c3371..41ffd433f70976da474bfe9b1471ee5ece632a28 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -2,18 +2,11 @@ config ARCH_MXC
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
- select ARM_PATCH_PHYS_VIRT
select CLKSRC_MMIO
- select COMMON_CLK
select GENERIC_ALLOCATOR
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
- select MULTI_IRQ_HANDLER
select PINCTRL
select SOC_BUS
- select SPARSE_IRQ
- select USE_OF
help
Support for Freescale MXC/iMX-based family of processors
@@ -121,7 +114,6 @@ config SOC_IMX31
config SOC_IMX35
bool
select ARCH_MXC_IOMUX_V3
- select CPU_V6K
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
@@ -132,7 +124,6 @@ config SOC_IMX5
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_MXC_IOMUX_V3
- select CPU_V7
select MXC_TZIC
config SOC_IMX51
@@ -792,14 +783,12 @@ config SOC_IMX6Q
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
select ARM_GIC
- select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
- select HAVE_SMP
select MFD_SYSCON
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
@@ -817,7 +806,6 @@ config SOC_IMX6SL
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_GIC
- select CPU_V7
select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
@@ -833,9 +821,7 @@ config SOC_IMX6SL
config SOC_VF610
bool "Vybrid Family VF610 support"
- select CPU_V7
select ARM_GIC
- select CLKSRC_OF
select PINCTRL_VF610
select VF_PIT_TIMER
select PL310_ERRATA_588369 if CACHE_PL310
diff --git a/arch/arm/mach-integrator/include/mach/timex.h b/arch/arm/mach-integrator/include/mach/timex.h
deleted file mode 100644
index 1dcb42028c829341bc93b5e94d1999bc673eeade..0000000000000000000000000000000000000000
--- a/arch/arm/mach-integrator/include/mach/timex.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/timex.h
- *
- * Integrator architecture timex specifications
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * ??
- */
-#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/arch/arm/mach-iop13xx/include/mach/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h
deleted file mode 100644
index 45fb2745bb548e36cb9af3ebdf19741d18178b4c..0000000000000000000000000000000000000000
--- a/arch/arm/mach-iop13xx/include/mach/timex.h
+++ /dev/null
@@ -1 +0,0 @@
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-iop32x/include/mach/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h
deleted file mode 100644
index 7262ab81419da25eb9bf3041c0e91c30bd6aeb37..0000000000000000000000000000000000000000
--- a/arch/arm/mach-iop32x/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/timex.h
- *
- * IOP32x architecture timex specifications
- */
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-iop33x/include/mach/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h
deleted file mode 100644
index 54c589091d6eb7b6dea1881059602de7258e43bd..0000000000000000000000000000000000000000
--- a/arch/arm/mach-iop33x/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/timex.h
- *
- * IOP3xx architecture timex specifications
- */
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index be882c95bd360eaac884916cc01250e7e870e1fa..fc4b7b24265e91d5c3007cc5d2ffe42229b85427 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -23,7 +23,6 @@
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/time.h>
-#include <linux/timex.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
@@ -44,6 +43,17 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
+#define IXP4XX_TIMER_FREQ 66666000
+
+/*
+ * The timer register doesn't allow to specify the two least significant bits of
+ * the timeout value and assumes them being zero. So make sure IXP4XX_LATCH is
+ * the best value with the two least significant bits unset.
+ */
+#define IXP4XX_LATCH DIV_ROUND_CLOSEST(IXP4XX_TIMER_FREQ, \
+ (IXP4XX_OST_RELOAD_MASK + 1) * HZ) * \
+ (IXP4XX_OST_RELOAD_MASK + 1)
+
static void __init ixp4xx_clocksource_init(void);
static void __init ixp4xx_clockevent_init(void);
static struct clock_event_device clockevent_ixp4xx;
@@ -519,7 +529,7 @@ static void ixp4xx_set_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK;
+ osrt = IXP4XX_LATCH & ~IXP4XX_OST_RELOAD_MASK;
opts = IXP4XX_OST_ENABLE;
break;
case CLOCK_EVT_MODE_ONESHOT:
diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h
deleted file mode 100644
index 0396d89f947c879e1279f6fb3e4ca38cc02d154f..0000000000000000000000000000000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/timex.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/timex.h
- *
- */
-
-#include <mach/ixp4xx-regs.h>
-
-/*
- * We use IXP425 General purpose timer for our timer needs, it runs at
- * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
- * timer register ignores the bottom 2 bits of the LATCH value.
- */
-#define IXP4XX_TIMER_FREQ 66666000
-#define CLOCK_TICK_RATE \
- (((IXP4XX_TIMER_FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
-
diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig
index 90a708fef54136b80a1868abd987f663cedf3fb5..f50bc936cb8454e1a0f108a961e3811f6dc823c6 100644
--- a/arch/arm/mach-keystone/Kconfig
+++ b/arch/arm/mach-keystone/Kconfig
@@ -1,13 +1,9 @@
config ARCH_KEYSTONE
bool "Texas Instruments Keystone Devices"
depends on ARCH_MULTI_V7
- select CPU_V7
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
- select HAVE_SMP
select CLKSRC_MMIO
- select GENERIC_CLOCKEVENTS
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_ERRATA_798181 if SMP
select COMMON_CLK_KEYSTONE
select ARCH_SUPPORTS_BIG_ENDIAN
diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h
deleted file mode 100644
index c923cd169b9c95c9e74ffbc33d6ca24818a11871..0000000000000000000000000000000000000000
--- a/arch/arm/mach-kirkwood/include/mach/timex.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
-
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
deleted file mode 100644
index 10f716371bd350057e8b721690954ac1778bdebd..0000000000000000000000000000000000000000
--- a/arch/arm/mach-ks8695/include/mach/timex.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-ks8695/include/mach/timex.h
- *
- * Copyright (C) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - Time Parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <mach/hardware.h>
-
-#define CLOCK_TICK_RATE KS8695_CLOCK_RATE
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/timex.h b/arch/arm/mach-lpc32xx/include/mach/timex.h
deleted file mode 100644
index 8d4066b16b3f5c2cc4c706372501b81c242af0ee..0000000000000000000000000000000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/timex.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/timex.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/*
- * Rate in Hz of the main system oscillator. This value should match
- * the value 'MAIN_OSC_FREQ' in platform.h
- */
-#define CLOCK_TICK_RATE 13000000
-
-#endif
diff --git a/arch/arm/mach-mmp/include/mach/timex.h b/arch/arm/mach-mmp/include/mach/timex.h
deleted file mode 100644
index 70c9f1d88c0280590da0b21f9bcce7376b4ca67b..0000000000000000000000000000000000000000
--- a/arch/arm/mach-mmp/include/mach/timex.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/timex.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifdef CONFIG_CPU_MMP2
-#define CLOCK_TICK_RATE 6500000
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index bbcd2322fd2702215fc96965b66e00d67016d10b..2756351dbb35acac76190f3342a92e006d77c9d6 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -39,6 +39,12 @@
#include "clock.h"
+#ifdef CONFIG_CPU_MMP2
+#define MMP_CLOCK_FREQ 6500000
+#else
+#define MMP_CLOCK_FREQ 3250000
+#endif
+
#define TIMERS_VIRT_BASE TIMERS1_VIRT_BASE
#define MAX_DELTA (0xfffffffe)
@@ -195,14 +201,14 @@ void __init timer_init(int irq)
{
timer_config();
- sched_clock_register(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
+ sched_clock_register(mmp_read_sched_clock, 32, MMP_CLOCK_FREQ);
ckevt.cpumask = cpumask_of(0);
setup_irq(irq, &timer_irq);
- clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
- clockevents_config_and_register(&ckevt, CLOCK_TICK_RATE,
+ clocksource_register_hz(&cksrc, MMP_CLOCK_FREQ);
+ clockevents_config_and_register(&ckevt, MMP_CLOCK_FREQ,
MIN_DELTA, MAX_DELTA);
}
diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig
index e9b45bb58263dae86cc1efa9fd13a270107e6dd8..82a4ba8578a23ce5fad77bcaa63eaee8e3ac5603 100644
--- a/arch/arm/mach-moxart/Kconfig
+++ b/arch/arm/mach-moxart/Kconfig
@@ -2,14 +2,9 @@ config ARCH_MOXART
bool "MOXA ART SoC" if ARCH_MULTI_V4
select CPU_FA526
select ARM_DMA_MEM_BUFFERABLE
- select USE_OF
- select CLKSRC_OF
select CLKSRC_MMIO
- select HAVE_CLK
- select COMMON_CLK
select GENERIC_IRQ_CHIP
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_CLOCKEVENTS
select PHYLIB if NETDEVICES
help
Say Y here if you want to run your kernel on hardware with a
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 9625cf378931faa7b3e6740f963ac2128d7f92fe..a7f959e58c3d0c3432ae6bbf603db0ed7ef7320e 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,50 +1,9 @@
-config ARCH_MSM
- bool
-
-config ARCH_MSM_DT
- bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7
- select ARCH_MSM
- select ARCH_REQUIRE_GPIOLIB
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- help
- Support for Qualcomm's devicetree based MSM systems.
-
if ARCH_MSM
-menu "Qualcomm MSM SoC Selection"
- depends on ARCH_MSM_DT
-
-config ARCH_MSM8X60
- bool "Enable support for MSM8X60"
- select ARM_GIC
- select CPU_V7
- select HAVE_SMP
- select MSM_SCM if SMP
- select MSM_TIMER
-
-config ARCH_MSM8960
- bool "Enable support for MSM8960"
- select ARM_GIC
- select CPU_V7
- select HAVE_SMP
- select MSM_SCM if SMP
- select MSM_TIMER
-
-config ARCH_MSM8974
- bool "Enable support for MSM8974"
- select ARM_GIC
- select CPU_V7
- select HAVE_ARM_ARCH_TIMER
- select HAVE_SMP
- select MSM_SCM if SMP
-
-endmenu
-
choice
prompt "Qualcomm MSM SoC Type"
default ARCH_MSM7X00A
- depends on ARCH_MSM_NODT
+ depends on ARCH_MSM
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
@@ -54,7 +13,7 @@ config ARCH_MSM7X00A
select MACH_TROUT if !MACH_HALIBUT
select MSM_PROC_COMM
select MSM_SMD
- select MSM_TIMER
+ select CLKSRC_QCOM
select MSM_SMD_PKG3
config ARCH_MSM7X30
@@ -66,7 +25,7 @@ config ARCH_MSM7X30
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
- select MSM_TIMER
+ select CLKSRC_QCOM
select MSM_VIC
config ARCH_QSD8X50
@@ -78,7 +37,7 @@ config ARCH_QSD8X50
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
- select MSM_TIMER
+ select CLKSRC_QCOM
select MSM_VIC
endchoice
@@ -99,7 +58,7 @@ config MSM_VIC
bool
menu "Qualcomm MSM Board Type"
- depends on ARCH_MSM_NODT
+ depends on ARCH_MSM
config MACH_HALIBUT
depends on ARCH_MSM
@@ -153,7 +112,4 @@ config MSM_GPIOMUX
config MSM_SCM
bool
-config MSM_TIMER
- bool
-
endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 8e307a10d3c344a5dd2acb6900812baef9e4b43c..27c078a568dfae79a08da4baa3e47fe3b87cbd3e 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,4 +1,3 @@
-obj-$(CONFIG_MSM_TIMER) += timer.o
obj-$(CONFIG_MSM_PROC_COMM) += clock.o
obj-$(CONFIG_MSM_VIC) += irq-vic.o
@@ -14,18 +13,11 @@ obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
-
-CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
-
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
index 33c7725adae2ffd5f885011c2bcd549030c159fd..0a4899b7d85c8b55d73a31f89df35abd575d1351 100644
--- a/arch/arm/mach-msm/common.h
+++ b/arch/arm/mach-msm/common.h
@@ -24,7 +24,6 @@ extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
unsigned int mtype, void *caller);
extern struct smp_operations msm_smp_ops;
-extern void msm_cpu_die(unsigned int cpu);
struct msm_mmc_platform_data;
diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S
deleted file mode 100644
index 6c62c3f82fe668b33cf5976a36edce8d572eb833..0000000000000000000000000000000000000000
--- a/arch/arm/mach-msm/headsmp.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * linux/arch/arm/mach-realview/headsmp.S
- *
- * Copyright (c) 2003 ARM Limited
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-/*
- * MSM specific entry point for secondary CPUs. This provides
- * a "holding pen" into which all secondary cores are held until we're
- * ready for them to initialise.
- */
-ENTRY(msm_secondary_startup)
- mrc p15, 0, r0, c0, c0, 5
- and r0, r0, #15
- adr r4, 1f
- ldmia r4, {r5, r6}
- sub r4, r4, r5
- add r6, r6, r4
-pen: ldr r7, [r6]
- cmp r7, r0
- bne pen
-
- /*
- * we've been released from the holding pen: secondary_stack
- * should now contain the SVC stack for this core
- */
- b secondary_startup
-ENDPROC(msm_secondary_startup)
-
- .align
-1: .long .
- .long pen_release
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
deleted file mode 100644
index 326a87261f9ac039248bd33f77f516f8c3fef87b..0000000000000000000000000000000000000000
--- a/arch/arm/mach-msm/hotplug.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/smp_plat.h>
-
-#include "common.h"
-
-static inline void cpu_enter_lowpower(void)
-{
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-}
-
-static inline void platform_do_lowpower(unsigned int cpu)
-{
- /* Just enter wfi for now. TODO: Properly shut off the cpu. */
- for (;;) {
- /*
- * here's the WFI
- */
- asm("wfi"
- :
- :
- : "memory", "cc");
-
- if (pen_release == cpu_logical_map(cpu)) {
- /*
- * OK, proper wakeup, we're done
- */
- break;
- }
-
- /*
- * getting here, means that we have come out of WFI without
- * having been woken up - this shouldn't happen
- *
- * The trouble is, letting people know about this is not really
- * possible, since we are currently running incoherently, and
- * therefore cannot safely call printk() or anything else
- */
- pr_debug("CPU%u: spurious wakeup call\n", cpu);
- }
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void __ref msm_cpu_die(unsigned int cpu)
-{
- /*
- * we're ready for shutdown now, so do it
- */
- cpu_enter_lowpower();
- platform_do_lowpower(cpu);
-
- /*
- * bring this CPU back into the world of cache
- * coherency, and then restore interrupts
- */
- cpu_leave_lowpower();
-}
diff --git a/arch/arm/mach-msm/include/mach/timex.h b/arch/arm/mach-msm/include/mach/timex.h
deleted file mode 100644
index a62e6b215aec6b1848980389636c3123c4f38d4d..0000000000000000000000000000000000000000
--- a/arch/arm/mach-msm/include/mach/timex.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-msm/include/mach/timex.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_TIMEX_H
-#define __ASM_ARCH_MSM_TIMEX_H
-
-#define CLOCK_TICK_RATE 1000000
-
-#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h
deleted file mode 100644
index 0e8c443c723aa7409f535793370995cb5ef486f7..0000000000000000000000000000000000000000
--- a/arch/arm/mach-mv78xx0/include/mach/timex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index df9e7d270810aeb7c227812b473f243cea9a88d8..ca004aceaf8e74eb7931cbd71841ff299a7174c4 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -2,15 +2,10 @@ config ARCH_MVEBU
bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
- select MULTI_IRQ_HANDLER
select PINCTRL
select PLAT_ORION
- select SPARSE_IRQ
- select CLKDEV_LOOKUP
select MVEBU_MBUS
select ZONE_DMA if ARM_LPAE
select ARCH_REQUIRE_GPIOLIB
@@ -25,7 +20,6 @@ menu "Marvell SOC with device tree"
config MACH_ARMADA_370_XP
bool
select ARMADA_370_XP_TIMER
- select HAVE_SMP
select CACHE_L2X0
select CPU_PJ4B
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 878aebe98dcc817029732847f6b2fb39880f8ba2..d99846103bbbed5ff84ba536c6485bf38018850b 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -3,8 +3,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
AFLAGS_coherency_ll.o := -Wa,-march=armv7-a
-obj-y += system-controller.o mvebu-soc-id.o
+obj-y += coherency.o coherency_ll.o pmsu.o system-controller.o mvebu-soc-id.o
obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
-obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 5b793ebb0a24d2f8baa8523c4528dee359bd58fc..a57cb36d52af930611239137809c9f6006737798 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -32,11 +32,6 @@
#include "coherency.h"
#include "mvebu-soc-id.h"
-static void __init armada_370_xp_map_io(void)
-{
- debug_ll_io_init();
-}
-
static void __init armada_370_xp_timer_and_clk_init(void)
{
of_clk_init(NULL);
@@ -91,7 +86,6 @@ static const char * const armada_370_xp_dt_compat[] = {
DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)")
.smp = smp_ops(armada_xp_smp_ops),
.init_machine = armada_370_xp_dt_init,
- .map_io = armada_370_xp_map_io,
.init_time = armada_370_xp_timer_and_clk_init,
.restart = mvebu_restart,
.dt_compat = armada_370_xp_dt_compat,
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
index a7fb89a5b5d9818db3174916d0e7e0589ed53456..e6e300afe83645f13b611436ece7ca5ac02ed36a 100644
--- a/arch/arm/mach-mvebu/system-controller.c
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -54,7 +54,7 @@ static const struct mvebu_system_controller orion_system_controller = {
.system_soft_reset = 0x1,
};
-static struct of_device_id of_system_controller_table[] = {
+static const struct of_device_id of_system_controller_table[] = {
{
.compatible = "marvell,orion-system-controller",
.data = (void *) &orion_system_controller,
@@ -90,13 +90,12 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd)
static int __init mvebu_system_controller_init(void)
{
+ const struct of_device_id *match;
struct device_node *np;
- np = of_find_matching_node(NULL, of_system_controller_table);
+ np = of_find_matching_node_and_match(NULL, of_system_controller_table,
+ &match);
if (np) {
- const struct of_device_id *match =
- of_match_node(of_system_controller_table, np);
- BUG_ON(!match);
system_controller_base = of_iomap(np, 0);
mvebu_sc = (struct mvebu_system_controller *)match->data;
of_node_put(np);
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 8cde9e05b5d65c17194cb8acee8c19a52d5aa025..84794137b17500da75487a5e394be6bea0f30495 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -16,11 +16,7 @@ config ARCH_MXS
bool "Freescale MXS (i.MX23, i.MX28) support"
depends on ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK_PREPARE
select PINCTRL
select SOC_BUS
select SOC_IMX23
diff --git a/arch/arm/mach-netx/include/mach/timex.h b/arch/arm/mach-netx/include/mach/timex.h
deleted file mode 100644
index 1120dd0ba3933e45f2738cd42faff432dcfcf167..0000000000000000000000000000000000000000
--- a/arch/arm/mach-netx/include/mach/timex.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/timex.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE 100000000
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 3177c7a40930c001e35f47b104e29cf52550915c..5fb2a590ec17dfe94931c9685d9748ee722e3992 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -28,6 +28,9 @@
#include <asm/mach/time.h>
#include <mach/netx-regs.h>
+#define NETX_CLOCK_FREQ 100000000
+#define NETX_LATCH DIV_ROUND_CLOSEST(NETX_CLOCK_FREQ, HZ)
+
#define TIMER_CLOCKEVENT 0
#define TIMER_CLOCKSOURCE 1
@@ -41,7 +44,7 @@ static void netx_set_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- writel(LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
+ writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT));
tmode = NETX_GPIO_COUNTER_CTRL_RST_EN |
NETX_GPIO_COUNTER_CTRL_IRQ_EN |
NETX_GPIO_COUNTER_CTRL_RUN;
@@ -114,7 +117,7 @@ void __init netx_timer_init(void)
/* Reset the timer value to zero */
writel(0, NETX_GPIO_COUNTER_CURRENT(0));
- writel(LATCH, NETX_GPIO_COUNTER_MAX(0));
+ writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(0));
/* acknowledge interrupt */
writel(COUNTER_BIT(0), NETX_GPIO_IRQ);
@@ -137,11 +140,11 @@ void __init netx_timer_init(void)
NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
- "netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up);
+ "netx_timer", NETX_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up);
/* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
* Adding some safety ... */
netx_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&netx_clockevent, CLOCK_TICK_RATE,
+ clockevents_config_and_register(&netx_clockevent, NETX_CLOCK_FREQ,
0xa00, 0xfffffffe);
}
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 4d42da49753c68f1afd914a0a4a4246e09b8893c..486d301f43fdafbf9ab1a20744095bdbaf5fd2ed 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -6,16 +6,11 @@ config ARCH_NOMADIK
select ARM_VIC
select CLKSRC_NOMADIK_MTU
select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
- select CLKSRC_OF
- select COMMON_CLK
select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_NOMADIK
select PINCTRL_STN8815
- select SPARSE_IRQ
- select USE_OF
help
Support for the Nomadik platform by ST-Ericsson
diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
index 59d8f0a70919a72f875b0a81cd75b388dcf8a5cb..bc41f26c1a1208a7beb0fe2390229a54ef01eff6 100644
--- a/arch/arm/mach-nspire/Kconfig
+++ b/arch/arm/mach-nspire/Kconfig
@@ -3,14 +3,9 @@ config ARCH_NSPIRE
depends on ARCH_MULTI_V4_V5
depends on MMU
select CPU_ARM926T
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select SPARSE_IRQ
select ARM_AMBA
select ARM_VIC
select ARM_TIMER_SP804
- select USE_OF
- select CLKSRC_OF
help
This enables support for systems using the TI-NSPIRE CPU
diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h
deleted file mode 100644
index 4793790d53cce20aab8494df6426abab81503206..0000000000000000000000000000000000000000
--- a/arch/arm/mach-omap1/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/timex.h
- */
-
-#include <plat/timex.h>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index ac488251174961bf41d606f2d633ec09a55cf684..27fc52d418a5046fd6f88b11e1311a2f925e2603 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -6,7 +6,6 @@ config ARCH_OMAP2
depends on ARCH_MULTI_V6
select ARCH_OMAP2PLUS
select CPU_V6
- select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP3
@@ -15,8 +14,6 @@ config ARCH_OMAP3
select ARCH_OMAP2PLUS
select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
- select CPU_V7
- select MULTI_IRQ_HANDLER
select OMAP_INTERCONNECT
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
@@ -32,10 +29,8 @@ config ARCH_OMAP4
select ARM_ERRATA_720789
select ARM_GIC
select CACHE_L2X0
- select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select OMAP_INTERCONNECT
select PL310_ERRATA_588369
select PL310_ERRATA_727915
@@ -51,10 +46,8 @@ config SOC_OMAP5
select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_GIC
- select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181 if SMP
@@ -64,16 +57,12 @@ config SOC_AM33XX
select ARCH_OMAP2PLUS
select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
- select CPU_V7
- select MULTI_IRQ_HANDLER
config SOC_AM43XX
bool "TI AM43x"
depends on ARCH_MULTI_V7
- select CPU_V7
select ARCH_OMAP2PLUS
select ARCH_HAS_OPP
- select MULTI_IRQ_HANDLER
select ARM_GIC
select MACH_OMAP_GENERIC
@@ -84,8 +73,6 @@ config SOC_DRA7XX
select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_GIC
- select CPU_V7
- select HAVE_SMP
select HAVE_ARM_ARCH_TIMER
config ARCH_OMAP2PLUS
@@ -96,16 +83,12 @@ config ARCH_OMAP2PLUS
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MACH_OMAP_GENERIC
select OMAP_DM_TIMER
select PINCTRL
select SOC_BUS
- select SPARSE_IRQ
select TI_PRIV_EDMA
- select USE_OF
help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h
deleted file mode 100644
index de9f8fc40e7c071e3fe177f557f2efda648a8290..0000000000000000000000000000000000000000
--- a/arch/arm/mach-omap2/include/mach/timex.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/timex.h
- */
-
-#include <plat/timex.h>
diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h
deleted file mode 100644
index 4c69820e0810f228737229a869e42f5ddea10545..0000000000000000000000000000000000000000
--- a/arch/arm/mach-orion5x/include/mach/timex.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/timex.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig
index b1022f4315f7f381accd63b6202acce59a236433..eca9eb1c59316ebabb8f2771905c5766951eeaab 100644
--- a/arch/arm/mach-picoxcell/Kconfig
+++ b/arch/arm/mach-picoxcell/Kconfig
@@ -1,12 +1,7 @@
config ARCH_PICOXCELL
bool "Picochip PicoXcell" if ARCH_MULTI_V6
select ARCH_REQUIRE_GPIOLIB
- select ARM_PATCH_PHYS_VIRT
select ARM_VIC
- select CPU_V6K
select DW_APB_TIMER_OF
- select GENERIC_CLOCKEVENTS
select HAVE_TCM
select NO_IOPORT
- select SPARSE_IRQ
- select USE_OF
diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig
index 6988b117fc174a70e049df575417dea3093daa1b..3e8189186a5b50f9e8906231c6f46f2e81641a9e 100644
--- a/arch/arm/mach-prima2/Kconfig
+++ b/arch/arm/mach-prima2/Kconfig
@@ -1,9 +1,8 @@
config ARCH_SIRF
bool "CSR SiRF" if ARCH_MULTI_V7
+ select ARCH_HAS_RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
select PINCTRL
select PINCTRL_SIRF
@@ -17,7 +16,6 @@ menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
config ARCH_ATLAS6
bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform"
default y
- select CPU_V7
select SIRF_IRQ
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
@@ -25,7 +23,6 @@ config ARCH_ATLAS6
config ARCH_PRIMA2
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
default y
- select CPU_V7
select SIRF_IRQ
select ZONE_DMA
help
@@ -35,9 +32,7 @@ config ARCH_MARCO
bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform"
default y
select ARM_GIC
- select CPU_V7
select HAVE_ARM_SCU if SMP
- select HAVE_SMP
select SMP_ON_UP if SMP
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index d49aff74de98a778c14dfc495718adfc6e15fdb6..47c7819edb9bbd56c291ab6f0902c047214aedbf 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -15,7 +15,7 @@
#include <linux/of_platform.h>
#include "common.h"
-void __init sirfsoc_init_late(void)
+static void __init sirfsoc_init_late(void)
{
sirfsoc_pm_init();
}
@@ -27,7 +27,7 @@ static __init void sirfsoc_map_io(void)
}
#ifdef CONFIG_ARCH_ATLAS6
-static const char *atlas6_dt_match[] __initdata = {
+static const char *atlas6_dt_match[] __initconst = {
"sirf,atlas6",
NULL
};
@@ -37,12 +37,11 @@ DT_MACHINE_START(ATLAS6_DT, "Generic ATLAS6 (Flattened Device Tree)")
.map_io = sirfsoc_map_io,
.init_late = sirfsoc_init_late,
.dt_compat = atlas6_dt_match,
- .restart = sirfsoc_restart,
MACHINE_END
#endif
#ifdef CONFIG_ARCH_PRIMA2
-static const char *prima2_dt_match[] __initdata = {
+static const char *prima2_dt_match[] __initconst = {
"sirf,prima2",
NULL
};
@@ -53,12 +52,11 @@ DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
.dma_zone_size = SZ_256M,
.init_late = sirfsoc_init_late,
.dt_compat = prima2_dt_match,
- .restart = sirfsoc_restart,
MACHINE_END
#endif
#ifdef CONFIG_ARCH_MARCO
-static const char *marco_dt_match[] __initdata = {
+static const char *marco_dt_match[] __initconst = {
"sirf,marco",
NULL
};
@@ -69,6 +67,5 @@ DT_MACHINE_START(MARCO_DT, "Generic MARCO (Flattened Device Tree)")
.map_io = sirfsoc_map_io,
.init_late = sirfsoc_init_late,
.dt_compat = marco_dt_match,
- .restart = sirfsoc_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index 4b768060a858e98c51a085e192cf0e6c43a3c198..07d3e5ed9264f2cce1bfaf584db6fdddd7290175 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -23,7 +23,6 @@ extern void sirfsoc_secondary_startup(void);
extern void sirfsoc_cpu_die(unsigned int cpu);
extern void __init sirfsoc_of_irq_init(void);
-extern void sirfsoc_restart(enum reboot_mode, const char *);
extern asmlinkage void __exception_irq_entry sirfsoc_handle_irq(struct pt_regs *regs);
#ifndef CONFIG_DEBUG_LL
diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c
index cbcbe9cb094c480a928d22ad23642eec3ecc0178..c7102539c0b08cd4cdfa0503b6634f02027b9d81 100644
--- a/arch/arm/mach-prima2/l2x0.c
+++ b/arch/arm/mach-prima2/l2x0.c
@@ -11,24 +11,23 @@
#include <linux/of.h>
#include <asm/hardware/cache-l2x0.h>
-struct l2x0_aux
-{
+struct l2x0_aux {
u32 val;
u32 mask;
};
-static struct l2x0_aux prima2_l2x0_aux __initconst = {
+static const struct l2x0_aux prima2_l2x0_aux __initconst = {
.val = 2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT,
.mask = 0,
};
-static struct l2x0_aux marco_l2x0_aux __initconst = {
+static const struct l2x0_aux marco_l2x0_aux __initconst = {
.val = (2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) |
(1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT),
.mask = L2X0_AUX_CTRL_MASK,
};
-static struct of_device_id sirf_l2x0_ids[] __initconst = {
+static const struct of_device_id sirf_l2x0_ids[] __initconst = {
{ .compatible = "sirf,prima2-pl310-cache", .data = &prima2_l2x0_aux, },
{ .compatible = "sirf,marco-pl310-cache", .data = &marco_l2x0_aux, },
{},
diff --git a/arch/arm/mach-prima2/platsmp.c b/arch/arm/mach-prima2/platsmp.c
index e358b0736dea464fbf56d3a0e59858daf7998bfe..335c12e922621a1f67e0e9df730d2bc2cad00e96 100644
--- a/arch/arm/mach-prima2/platsmp.c
+++ b/arch/arm/mach-prima2/platsmp.c
@@ -138,9 +138,9 @@ static void __init sirfsoc_smp_prepare_cpus(unsigned int max_cpus)
}
struct smp_operations sirfsoc_smp_ops __initdata = {
- .smp_prepare_cpus = sirfsoc_smp_prepare_cpus,
- .smp_secondary_init = sirfsoc_secondary_init,
- .smp_boot_secondary = sirfsoc_boot_secondary,
+ .smp_prepare_cpus = sirfsoc_smp_prepare_cpus,
+ .smp_secondary_init = sirfsoc_secondary_init,
+ .smp_boot_secondary = sirfsoc_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = sirfsoc_cpu_die,
#endif
diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c
index ccb53391147ad008c40b0caf39a6f724bed4f173..4887a2a4c698a7f5b82e0b511af84615cee7dd86 100644
--- a/arch/arm/mach-prima2/rstc.c
+++ b/arch/arm/mach-prima2/rstc.c
@@ -13,57 +13,38 @@
#include <linux/device.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/platform_device.h>
#include <linux/reboot.h>
+#include <linux/reset-controller.h>
-void __iomem *sirfsoc_rstc_base;
-static DEFINE_MUTEX(rstc_lock);
-
-static struct of_device_id rstc_ids[] = {
- { .compatible = "sirf,prima2-rstc" },
- { .compatible = "sirf,marco-rstc" },
- {},
-};
+#include <asm/system_misc.h>
-static int __init sirfsoc_of_rstc_init(void)
-{
- struct device_node *np;
+#define SIRFSOC_RSTBIT_NUM 64
- np = of_find_matching_node(NULL, rstc_ids);
- if (!np) {
- pr_err("unable to find compatible sirf rstc node in dtb\n");
- return -ENOENT;
- }
-
- sirfsoc_rstc_base = of_iomap(np, 0);
- if (!sirfsoc_rstc_base)
- panic("unable to map rstc cpu registers\n");
-
- of_node_put(np);
-
- return 0;
-}
-early_initcall(sirfsoc_of_rstc_init);
+static void __iomem *sirfsoc_rstc_base;
+static DEFINE_MUTEX(rstc_lock);
-int sirfsoc_reset_device(struct device *dev)
+static int sirfsoc_reset_module(struct reset_controller_dev *rcdev,
+ unsigned long sw_reset_idx)
{
- u32 reset_bit;
+ u32 reset_bit = sw_reset_idx;
- if (of_property_read_u32(dev->of_node, "reset-bit", &reset_bit))
+ if (reset_bit >= SIRFSOC_RSTBIT_NUM)
return -EINVAL;
mutex_lock(&rstc_lock);
- if (of_device_is_compatible(dev->of_node, "sirf,prima2-rstc")) {
+ if (of_device_is_compatible(rcdev->of_node, "sirf,prima2-rstc")) {
/*
* Writing 1 to this bit resets corresponding block. Writing 0 to this
* bit de-asserts reset signal of the corresponding block.
* datasheet doesn't require explicit delay between the set and clear
* of reset bit. it could be shorter if tests pass.
*/
- writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit,
+ writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | (1 << reset_bit),
sirfsoc_rstc_base + (reset_bit / 32) * 4);
msleep(10);
- writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit,
+ writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~(1 << reset_bit),
sirfsoc_rstc_base + (reset_bit / 32) * 4);
} else {
/*
@@ -73,9 +54,9 @@ int sirfsoc_reset_device(struct device *dev)
* datasheet doesn't require explicit delay between the set and clear
* of reset bit. it could be shorter if tests pass.
*/
- writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8);
+ writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8);
msleep(10);
- writel(reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4);
+ writel(1 << reset_bit, sirfsoc_rstc_base + (reset_bit / 32) * 8 + 4);
}
mutex_unlock(&rstc_lock);
@@ -83,9 +64,57 @@ int sirfsoc_reset_device(struct device *dev)
return 0;
}
+static struct reset_control_ops sirfsoc_rstc_ops = {
+ .reset = sirfsoc_reset_module,
+};
+
+static struct reset_controller_dev sirfsoc_reset_controller = {
+ .ops = &sirfsoc_rstc_ops,
+ .nr_resets = SIRFSOC_RSTBIT_NUM,
+};
+
#define SIRFSOC_SYS_RST_BIT BIT(31)
-void sirfsoc_restart(enum reboot_mode mode, const char *cmd)
+static void sirfsoc_restart(enum reboot_mode mode, const char *cmd)
{
writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base);
}
+
+static int sirfsoc_rstc_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ sirfsoc_rstc_base = of_iomap(np, 0);
+ if (!sirfsoc_rstc_base) {
+ dev_err(&pdev->dev, "unable to map rstc cpu registers\n");
+ return -ENOMEM;
+ }
+
+ sirfsoc_reset_controller.of_node = np;
+ arm_pm_restart = sirfsoc_restart;
+
+ if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
+ reset_controller_register(&sirfsoc_reset_controller);
+
+ return 0;
+}
+
+static const struct of_device_id rstc_ids[] = {
+ { .compatible = "sirf,prima2-rstc" },
+ { .compatible = "sirf,marco-rstc" },
+ {},
+};
+
+static struct platform_driver sirfsoc_rstc_driver = {
+ .probe = sirfsoc_rstc_probe,
+ .driver = {
+ .name = "sirfsoc_rstc",
+ .owner = THIS_MODULE,
+ .of_match_table = rstc_ids,
+ },
+};
+
+static int __init sirfsoc_rstc_init(void)
+{
+ return platform_driver_register(&sirfsoc_rstc_driver);
+}
+subsys_initcall(sirfsoc_rstc_init);
diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c
index 9f2da2eec4dc52bec9629b714d961010abe2529c..a17c88b74fa1d878d14bc7169a65489cd0394217 100644
--- a/arch/arm/mach-prima2/rtciobrg.c
+++ b/arch/arm/mach-prima2/rtciobrg.c
@@ -137,4 +137,4 @@ postcore_initcall(sirfsoc_rtciobrg_init);
MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>, "
"Barry Song <baohua.song@csr.com>");
MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
deleted file mode 100644
index af6760a50e1ab6a82996b8155bdd088cb8827eb6..0000000000000000000000000000000000000000
--- a/arch/arm/mach-pxa/include/mach/timex.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/timex.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/* Various drivers are still using the constant of CLOCK_TICK_RATE, for
- * those drivers to at least work, the definition is provided here.
- *
- * NOTE: this is no longer accurate when multiple processors and boards
- * are selected, newer drivers should not depend on this any more. Use
- * either the clocksource/clockevent or get this at run-time by calling
- * get_clock_tick_rate() (as defined in generic.c).
- */
-
-#if defined(CONFIG_PXA25x)
-/* PXA250/210 timer base */
-#define CLOCK_TICK_RATE 3686400
-#elif defined(CONFIG_PXA27x)
-/* PXA27x timer base */
-#ifdef CONFIG_MACH_MAINSTONE
-#define CLOCK_TICK_RATE 3249600
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
-#else
-#define CLOCK_TICK_RATE 3250000
-#endif
diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
new file mode 100644
index 0000000000000000000000000000000000000000..a028be23433453d0ef7bacef1af026853dcbb412
--- /dev/null
+++ b/arch/arm/mach-qcom/Kconfig
@@ -0,0 +1,33 @@
+config ARCH_QCOM
+ bool "Qualcomm Support" if ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_GIC
+ select CLKSRC_OF
+ select GENERIC_CLOCKEVENTS
+ select HAVE_SMP
+ select QCOM_SCM if SMP
+ help
+ Support for Qualcomm's devicetree based systems.
+
+if ARCH_QCOM
+
+menu "Qualcomm SoC Selection"
+
+config ARCH_MSM8X60
+ bool "Enable support for MSM8X60"
+ select CLKSRC_QCOM
+
+config ARCH_MSM8960
+ bool "Enable support for MSM8960"
+ select CLKSRC_QCOM
+
+config ARCH_MSM8974
+ bool "Enable support for MSM8974"
+ select HAVE_ARM_ARCH_TIMER
+
+endmenu
+
+config QCOM_SCM
+ bool
+
+endif
diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..8f756ae1ae31ea69780361079902af7f8c9d97fb
--- /dev/null
+++ b/arch/arm/mach-qcom/Makefile
@@ -0,0 +1,5 @@
+obj-y := board.o
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o
+
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-qcom/board.c
similarity index 68%
rename from arch/arm/mach-msm/board-dt.c
rename to arch/arm/mach-qcom/board.c
index 1f11d93e700e4784d5b5d33e333f708b6d0cd295..830f69c3a3ce26350bb9f5fedf9262296dc6f197 100644
--- a/arch/arm/mach-msm/board-dt.c
+++ b/arch/arm/mach-qcom/board.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -17,10 +17,9 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include "common.h"
+extern struct smp_operations qcom_smp_ops;
-static const char * const msm_dt_match[] __initconst = {
- "qcom,msm8660-fluid",
+static const char * const qcom_dt_match[] __initconst = {
"qcom,msm8660-surf",
"qcom,msm8960-cdp",
NULL
@@ -31,11 +30,11 @@ static const char * const apq8074_dt_match[] __initconst = {
NULL
};
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
- .smp = smp_ops(msm_smp_ops),
- .dt_compat = msm_dt_match,
+DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
+ .smp = smp_ops(qcom_smp_ops),
+ .dt_compat = qcom_dt_match,
MACHINE_END
-DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)")
+DT_MACHINE_START(APQ_DT, "Qualcomm (Flattened Device Tree)")
.dt_compat = apq8074_dt_match,
MACHINE_END
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-qcom/platsmp.c
similarity index 65%
rename from arch/arm/mach-msm/platsmp.c
rename to arch/arm/mach-qcom/platsmp.c
index f10a1f58fde96a0cb70b6cfc43ae4b5203f67466..9c53ea70550dc246f908434c0b68a3365e4f87e4 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -2,6 +2,7 @@
* Copyright (C) 2002 ARM Ltd.
* All Rights Reserved
* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -12,41 +13,37 @@
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/device.h>
-#include <linux/jiffies.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <asm/cacheflush.h>
#include <asm/cputype.h>
-#include <asm/mach-types.h>
#include <asm/smp_plat.h>
#include "scm-boot.h"
-#include "common.h"
#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
#define SCSS_CPU1CORE_RESET 0xD80
#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
-extern void msm_secondary_startup(void);
+extern void secondary_startup(void);
static DEFINE_SPINLOCK(boot_lock);
+#ifdef CONFIG_HOTPLUG_CPU
+static void __ref qcom_cpu_die(unsigned int cpu)
+{
+ wfi();
+}
+#endif
+
static inline int get_core_count(void)
{
/* 1 + the PART[1:0] field of MIDR */
return ((read_cpuid_id() >> 4) & 3) + 1;
}
-static void msm_secondary_init(unsigned int cpu)
+static void qcom_secondary_init(unsigned int cpu)
{
- /*
- * let the primary processor know we're out of the
- * pen, then head off into the C entry point
- */
- pen_release = -1;
- smp_wmb();
-
/*
* Synchronise with the boot thread.
*/
@@ -57,7 +54,7 @@ static void msm_secondary_init(unsigned int cpu)
static void prepare_cold_cpu(unsigned int cpu)
{
int ret;
- ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup),
+ ret = scm_set_boot_addr(virt_to_phys(secondary_startup),
SCM_FLAG_COLDBOOT_CPU1);
if (ret == 0) {
void __iomem *sc1_base_ptr;
@@ -73,9 +70,8 @@ static void prepare_cold_cpu(unsigned int cpu)
"address\n");
}
-static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int qcom_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- unsigned long timeout;
static int cold_boot_done;
/* Only need to bring cpu out of reset this way once */
@@ -90,17 +86,6 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
*/
spin_lock(&boot_lock);
- /*
- * The secondary processor is waiting to be released from
- * the holding pen - release it, then wait for it to flag
- * that it has been released by resetting pen_release.
- *
- * Note that "pen_release" is the hardware CPU ID, whereas
- * "cpu" is Linux's internal ID.
- */
- pen_release = cpu_logical_map(cpu);
- sync_cache_w(&pen_release);
-
/*
* Send the secondary CPU a soft interrupt, thereby causing
* the boot monitor to read the system wide flags register,
@@ -108,22 +93,13 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
*/
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
- timeout = jiffies + (1 * HZ);
- while (time_before(jiffies, timeout)) {
- smp_rmb();
- if (pen_release == -1)
- break;
-
- udelay(10);
- }
-
/*
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
*/
spin_unlock(&boot_lock);
- return pen_release != -1 ? -ENOSYS : 0;
+ return 0;
}
/*
@@ -132,7 +108,7 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
* does not support the ARM SCU, so just set the possible cpu mask to
* NR_CPUS.
*/
-static void __init msm_smp_init_cpus(void)
+static void __init qcom_smp_init_cpus(void)
{
unsigned int i, ncores = get_core_count();
@@ -146,16 +122,16 @@ static void __init msm_smp_init_cpus(void)
set_cpu_possible(i, true);
}
-static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
+static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
{
}
-struct smp_operations msm_smp_ops __initdata = {
- .smp_init_cpus = msm_smp_init_cpus,
- .smp_prepare_cpus = msm_smp_prepare_cpus,
- .smp_secondary_init = msm_secondary_init,
- .smp_boot_secondary = msm_boot_secondary,
+struct smp_operations qcom_smp_ops __initdata = {
+ .smp_init_cpus = qcom_smp_init_cpus,
+ .smp_prepare_cpus = qcom_smp_prepare_cpus,
+ .smp_secondary_init = qcom_secondary_init,
+ .smp_boot_secondary = qcom_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
- .cpu_die = msm_cpu_die,
+ .cpu_die = qcom_cpu_die,
#endif
};
diff --git a/arch/arm/mach-msm/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c
similarity index 100%
rename from arch/arm/mach-msm/scm-boot.c
rename to arch/arm/mach-qcom/scm-boot.c
diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h
similarity index 100%
rename from arch/arm/mach-msm/scm-boot.h
rename to arch/arm/mach-qcom/scm-boot.h
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-qcom/scm.c
similarity index 100%
rename from arch/arm/mach-msm/scm.c
rename to arch/arm/mach-qcom/scm.c
diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-qcom/scm.h
similarity index 100%
rename from arch/arm/mach-msm/scm.h
rename to arch/arm/mach-qcom/scm.h
diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-realview/include/mach/timex.h
deleted file mode 100644
index 4eeb069373c219264a2f894c1464eb778cb0109d..0000000000000000000000000000000000000000
--- a/arch/arm/mach-realview/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/timex.h
- *
- * RealView architecture timex specifications
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index cf073dea5784b3c0fa125f1931305c55706f81e3..6b2f58645a73091677df7069527d5121b08e3bae 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -6,9 +6,6 @@ config ARCH_ROCKCHIP
select ARM_GIC
select CACHE_L2X0
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select DW_APB_TIMER_OF
select ARM_GLOBAL_TIMER
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
diff --git a/arch/arm/mach-rpc/include/mach/timex.h b/arch/arm/mach-rpc/include/mach/timex.h
deleted file mode 100644
index dd75e7387bbe02409e129690212ab3891ca87ee8..0000000000000000000000000000000000000000
--- a/arch/arm/mach-rpc/include/mach/timex.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-rpc/include/mach/timex.h
- *
- * Copyright (C) 1997, 1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * RiscPC architecture timex specifications
- */
-
-/*
- * On the RiscPC, the clock ticks at 2MHz.
- */
-#define CLOCK_TICK_RATE 2000000
-
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index 9a5158861ca9f5f23c758c829807942f3f72f009..2689771c1d38f351d00630d82a45a00838ea1b33 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -24,6 +24,9 @@
#include <asm/mach/time.h>
+#define RPC_CLOCK_FREQ 2000000
+#define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ)
+
static u32 ioc_timer_gettimeoffset(void)
{
unsigned int count1, count2, status;
@@ -46,23 +49,23 @@ static u32 ioc_timer_gettimeoffset(void)
* and count2.
*/
if (status & (1 << 5))
- offset -= LATCH;
+ offset -= RPC_LATCH;
} else if (count2 > count1) {
/*
* We have just had another interrupt between reading
* count1 and count2.
*/
- offset -= LATCH;
+ offset -= RPC_LATCH;
}
- offset = (LATCH - offset) * (tick_nsec / 1000);
- return ((offset + LATCH/2) / LATCH) * 1000;
+ offset = (RPC_LATCH - offset) * (tick_nsec / 1000);
+ return DIV_ROUND_CLOSEST(offset, RPC_LATCH) * 1000;
}
void __init ioctime_init(void)
{
- ioc_writeb(LATCH & 255, IOC_T0LTCHL);
- ioc_writeb(LATCH >> 8, IOC_T0LTCHH);
+ ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL);
+ ioc_writeb(RPC_LATCH >> 8, IOC_T0LTCHH);
ioc_writeb(0, IOC_T0GO);
}
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index f2727f2cc661806ce0686a791116e9c683a32d45..ba1cc62467789225a0008efe0adfc1b32369c9c5 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -521,7 +521,6 @@ config MACH_ANUBIS
select HAVE_PATA_PLATFORM
select S3C2440_XTAL_12000000
select S3C24XX_DCLK
- select S3C24XX_GPIO_EXTRA64
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_USB_HOST
help
@@ -562,7 +561,6 @@ config MACH_OSIRIS
select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
select S3C2440_XTAL_12000000
select S3C24XX_DCLK
- select S3C24XX_GPIO_EXTRA128
select S3C24XX_SIMTEC_PM if PM
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
index d39d3c7875803e456c25c37babc8be9f9d30cef5..d1afcf9252d18a1175661c0578f47ae677b842b6 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -30,13 +30,12 @@
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c
index 11b3b28457bbce9130309d876f9239905f82e7e2..192a5b2550b04a8b639fd8d4613b02f19b25b165 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c
@@ -31,13 +31,12 @@
#include <linux/mutex.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
index aaf006d1d6dc9ec6111ae080e3e4f15350615561..5527226fd61f305b514dd688e3dc17eb05bc8df0 100644
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c
@@ -34,6 +34,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <mach/hardware.h>
#include <linux/atomic.h>
@@ -43,7 +44,6 @@
#include <plat/clock.h>
#include <plat/cpu.h>
-#include <plat/regs-serial.h>
/* S3C2440 extended clock support */
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 1d77d709ec2299602d1b4bd9c51bc985db8e1891..1bc8e73c94f9864d8d7cdfc715c33582f9718005 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -27,6 +27,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
@@ -44,7 +45,6 @@
#include <asm/mach/map.h>
#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
#include <mach/dma.h>
#include <plat/cpu.h>
@@ -240,7 +240,6 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
} else {
samsung_cpu_id = s3c24xx_read_idcode_v4();
}
- s3c24xx_init_cpu();
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c
index 30aa53ff07a6b60118a512a65bb387216194ac93..09aa12da1789770df2bbd3ba4a27daf8bc7077d2 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
@@ -23,7 +24,6 @@
#include <plat/cpu.h>
#include <plat/dma-s3c24xx.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c
index b7e094671522d33d9b197fc28272d83473031310..0c0106d1a4d1c48826d7d7f1f93779aebbd8cadb 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <mach/dma.h>
@@ -23,7 +24,6 @@
#include <plat/dma-s3c24xx.h>
#include <plat/cpu.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c
index cd25de28804c935111da58ff97708e56a20d8238..2f8e8a3017dfa84b8e3d98531deb4386a6d4bdb7 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <mach/map.h>
#include <mach/dma.h>
@@ -23,7 +24,6 @@
#include <plat/dma-s3c24xx.h>
#include <plat/cpu.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index 95b9f759fe97fdea1df49efdf78f062f11a8d2aa..f4096ec0700ac7cf7396e2857eef9b26abb426b4 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -16,6 +16,7 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <mach/dma.h>
@@ -23,7 +24,6 @@
#include <plat/dma-s3c24xx.h>
#include <plat/cpu.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-dma.h>
#include <mach/regs-lcd.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
index 2558952e3147ee281ecf2a2e2c7fc4df20900925..2f39737544c06789c9b3337282e1fbef0936727d 100644
--- a/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c24xx/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
+#include <linux/serial_s3c.h>
#define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9)
diff --git a/arch/arm/plat-samsung/include/plat/rtc-core.h b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h
similarity index 69%
rename from arch/arm/plat-samsung/include/plat/rtc-core.h
rename to arch/arm/mach-s3c24xx/include/mach/rtc-core.h
index 7b542f7b7938a1aab3a2cc7da82bc6663cf07865..4d5f5768f700bdb44283aebe16f3454c20f72845 100644
--- a/arch/arm/plat-samsung/include/plat/rtc-core.h
+++ b/arch/arm/mach-s3c24xx/include/mach/rtc-core.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-samsung/include/plat/rtc-core.h
- *
+/*
* Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
*
* Samsung RTC Controller core functions
@@ -9,19 +8,19 @@
* published by the Free Software Foundation.
*/
-#ifndef __ASM_PLAT_RTC_CORE_H
-#define __ASM_PLAT_RTC_CORE_H __FILE__
+#ifndef __RTC_CORE_H
+#define __RTC_CORE_H __FILE__
/* These functions are only for use with the core support code, such as
* the cpu specific initialisation code
*/
+extern struct platform_device s3c_device_rtc;
+
/* re-define device name depending on support. */
static inline void s3c_rtc_setname(char *name)
{
-#if defined(CONFIG_S3C_DEV_RTC) || defined(CONFIG_PLAT_S3C24XX)
s3c_device_rtc.name = name;
-#endif
}
-#endif /* __ASM_PLAT_RTC_CORE_H */
+#endif /* __RTC_CORE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/tick.h b/arch/arm/mach-s3c24xx/include/mach/tick.h
deleted file mode 100644
index 544da41979db5c0ad98254ad7b58f67ceb40d4f2..0000000000000000000000000000000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/tick.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/include/mach/tick.h
- *
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C2410 - timer tick support
- */
-
-#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0))
-
-static inline int s3c24xx_ostimer_pending(void)
-{
- return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4;
-}
diff --git a/arch/arm/mach-s3c24xx/include/mach/timex.h b/arch/arm/mach-s3c24xx/include/mach/timex.h
deleted file mode 100644
index fe9ca1ffd51b190d03cd0ed0b97c88c267570eac..0000000000000000000000000000000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index 284ea1f4420507da064d339c4357e864f9d0b1c5..8ac9554aa996c708d8db6047a48d608008c63ceb 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -37,6 +37,7 @@
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
@@ -49,7 +50,6 @@
#include <asm/mach-types.h>
#include <mach/fb.h>
-#include <plat/regs-serial.h>
#include <mach/regs-lcd.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 2a16f8fb3584392c41d83f20c6576f2383babebe..81a270af2336f9a75536e36769cac3c8ebe5cc74 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
@@ -32,7 +33,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 6beab674c147c43b84a5fe670d87c8ca826558cf..d8f6bb1096cb3b2da4666e1c45df8cacd27eaaa9 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/dm9000.h>
#include <linux/platform_device.h>
@@ -33,7 +34,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/gpio-samsung.h>
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 981ba1eb9fdc83b191e911c64ac83c91cdb8fdfa..e371ff53a40820d184c527dec5d7f7ccd19d3779 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/dm9000.h>
#include <linux/ata_platform.h>
@@ -55,7 +56,6 @@
#include <plat/cpu-freq.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "bast.h"
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index ee7bb2905a99237e5464c42b2f763c1e2a3a7bcc..dc4db849f0fda599e721d1628b7896f32b973703 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -35,6 +35,7 @@
#include <linux/workqueue.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/i2c.h>
@@ -81,7 +82,6 @@
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index de0832181d8c0eb4081ee127369159a23f133be9..e453acd92cbf5cfea4017cd253bbf30a6585e567 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
@@ -62,7 +63,6 @@
#include <plat/gpio-cfg.h>
#include <plat/pll.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 67cb8e948b7ed4ee532f5acd9fab59d52ac6e93b..5faa7239e7d6d9ba0e02309ae9783215ad13941e 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -19,6 +19,7 @@
#include <linux/gpio.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
@@ -31,7 +32,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/i2c-s3c2410.h>
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 1f1559713d8b265c1233f581268f846d837339fa..9e57fd9f4f3bcbae6d9680a487fd945727e76a57 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -23,6 +23,7 @@
#include <linux/input.h>
#include <linux/io.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/dm9000.h>
#include <linux/platform_data/at24.h>
#include <linux/platform_device.h>
@@ -37,7 +38,6 @@
#include <mach/fb.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-lcd.h>
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 997684f17930836c7e7212ea48a7ac64113373e4..4cccaad34847d69e8d6a4a5700edfa1f415ad190 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -24,6 +24,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/timer.h>
#include <linux/io.h>
#include <linux/mmc/host.h>
@@ -43,7 +44,6 @@
#include <asm/mach/map.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/regs-serial.h>
#include <plat/clock.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 575d28c9e6c60fab668992b4c155d905890809a3..3066851f584d4cd10eb9fe58ac17f291d646dd3c 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -21,6 +21,7 @@
#include <linux/gpio.h>
#include <linux/string.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -38,7 +39,6 @@
//#include <asm/debug-ll.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index f84f2a4c0c6d0cb4aa3148d31db5806b870db635..a4ae4bb3666da146cacf8ffdc64af2cd30862801 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -18,6 +18,7 @@
#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/clk.h>
#include <linux/i2c.h>
#include <linux/io.h>
@@ -44,7 +45,6 @@
#include <plat/cpu-freq.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index 7e16b0740ec1eb02208aba8a0f4dc72f13e300fc..bdb3faac2d9b447a5999657640626bb3a43ab253 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -15,6 +15,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -32,7 +33,6 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index b534b76812e3751d8a145fb50ea935fa05baebf6..8c12787a8fd38537163d460694c4861e3f0c2675 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -31,6 +31,7 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_gpio.h>
#include <linux/io.h>
@@ -49,7 +50,6 @@
#include <linux/platform_data/leds-s3c24xx.h>
#include <mach/regs-lcd.h>
-#include <plat/regs-serial.h>
#include <mach/fb.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 0a5456cda1bcd5dc39139f89a2b07c68dcb32372..afb784e934c8b91c8b117e603b6d878fa8637536 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -21,6 +21,7 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/device.h>
@@ -57,7 +58,6 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index b36edce8b2b86ae4e4ec7cc05ee6d87af7e05ace..e6535ce1bc5ce4586afca563474800ab2d134e9a 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -23,6 +23,7 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/serial.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
@@ -49,7 +50,6 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
index f50454a34f72d09fd28b01f1cd347a1e5468eb6a..70f0900d4bcac263d04085933b996be9b3ec75e9 100644
--- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
+++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
@@ -19,13 +19,13 @@
#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <asm/mach/arch.h>
#include <mach/map.h>
#include <plat/cpu.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index a773789e4f38ec8cd87a8b8fd80aa2afbd696fbb..f32924ee0e9f671c5326b36fef817c2ae26fae83 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -35,6 +35,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -46,7 +47,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index f5bc721217e3227cd4faeef05460b07a4ca6e7f2..233fe52d2015a549c3b6ef507de4019664306f32 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -33,7 +34,6 @@
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index 12023cae437834d1acb23dfaee8164218d175a04..b3b54d8e1410dc81a7f8c2c80723e6466f3d49e8 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -18,6 +18,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mtd/partitions.h>
@@ -34,7 +35,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/regs-s3c2443-clock.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index de2e5d39a8471b490a90be86ea966c6b835ba02a..d071dcfea5480dc50688cf0d7cd2378e76623f92 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -20,6 +20,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -31,7 +32,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index d9933fcc6cc8bb8526af7808c28a5250c2ae2be1..06c4d77de3a5572513558552675505c663107abf 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -20,6 +20,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@@ -31,7 +32,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 7fad8f055cabc050b5aba9e1ecaf82c2fc1998f9..4108b2f0cede26e0b22fb9c18b16e5688c27978a 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -33,6 +33,7 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
@@ -44,7 +45,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 755df489a45f63ad1bbad111ed24ae53edf26054..1cc5b1bd51cd0fb14d098daa68d584aecc72fbd8 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -25,6 +25,7 @@
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
@@ -45,7 +46,6 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
-#include <plat/regs-serial.h>
#include <plat/samsung-time.h>
#include "bast.h"
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index f7ec9c55078748782cd3110c8b4cea81a5afc408..40868c0e0a683e673904c4c1a69db23448fef75f 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -16,6 +16,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
@@ -32,7 +33,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index 052ca23393a7e0274f52ed442278102584f986f1..68ea5b7e5dc7d57df5f06be4e44d5930b0a97ffb 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -33,9 +33,9 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
-#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <mach/regs-irq.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index ffb92cbca08cc06e2b23728cd9c88a826c9b52a8..04b58cb4988860bbd46d18e277679930d8674d78 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -21,6 +21,7 @@
#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/io.h>
@@ -37,7 +38,6 @@
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
#include <plat/cpu.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 0251650cbf8084a913290bdafa7f7e6e3f8e7659..657cbaca80ac46cefbfb9c6baa9f7d46432efd43 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -20,6 +20,7 @@
#include <linux/device.h>
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/reboot.h>
@@ -43,7 +44,6 @@
#include <plat/nand-core.h>
#include <plat/pll.h>
#include <plat/pm.h>
-#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index 8e01b4f2df35bc41b4abcaa54f8ec5102b9f998b..9fe260ae11e17b2cdfcce03a862c570c43ba756c 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -48,6 +48,7 @@
#include <asm/system_misc.h>
#include <mach/regs-s3c2443-clock.h>
+#include <mach/rtc-core.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -61,7 +62,6 @@
#include <plat/fb-core.h>
#include <plat/nand-core.h>
#include <plat/adc-core.h>
-#include <plat/rtc-core.h>
#include <plat/spi-core.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c
index 886c2147062bcfd64be98641dd191ff0c40cd84d..c7a804d0348e79be54d800b2207a008991a6dd49 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c24xx/s3c2443.c
@@ -34,6 +34,7 @@
#include <asm/system_misc.h>
#include <mach/regs-s3c2443-clock.h>
+#include <mach/rtc-core.h>
#include <plat/gpio-core.h>
#include <plat/gpio-cfg.h>
@@ -43,7 +44,6 @@
#include <plat/fb-core.h>
#include <plat/nand-core.h>
#include <plat/adc-core.h>
-#include <plat/rtc-core.h>
#include <plat/spi-core.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index 911b555029fc4f69ff4fda3fdcb0748d559deddc..fe30ebb234d28231737a3606ed9942eaaee81cc3 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -17,6 +17,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/device.h>
@@ -35,7 +36,6 @@
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/clock.h>
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
index dd47c8fa07fae7b17e8d9a48c58c3f0d22c13397..c9b91223697c00856f8d687940a143f39e7141d4 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S
+++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
@@ -25,13 +25,13 @@
*/
#include <linux/linkage.h>
+#include <linux/serial_s3c.h>
#include <asm/assembler.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
#include "regs-mem.h"
diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S
index 7f378b662da6baf1b4288f21fdd943a7b58f0068..d833d616bd2ed0177d7e7342f6a1673e7051c322 100644
--- a/arch/arm/mach-s3c24xx/sleep.S
+++ b/arch/arm/mach-s3c24xx/sleep.S
@@ -25,13 +25,13 @@
*/
#include <linux/linkage.h>
+#include <linux/serial_s3c.h>
#include <asm/assembler.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
* reset the UART configuration, only enable if you really need this!
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 76ab595d849bbb22c1cd45ea21c490198c463292..5c45aae675b63e86f21c44aea48e41bfccddb444 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -25,6 +25,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/io.h>
@@ -50,7 +51,6 @@
#include <plat/irq-uart.h>
#include <plat/pwm-core.h>
#include <plat/regs-irqtype.h>
-#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
#include "common.h"
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index dd9ccca5de1f3eb2a50ededc605fb5a36f2924e2..c9b95325b672cfe897a0148e7c6f743433bb0817 100644
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -12,8 +12,8 @@
/* pull in the relevant register and map files. */
+#include <linux/serial_s3c.h>
#include <mach/map.h>
-#include <plat/regs-serial.h>
/* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1
diff --git a/arch/arm/mach-s3c64xx/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h
deleted file mode 100644
index db9c1b1d56a4db535e0ca66a77f44b1fc74ec9d3..0000000000000000000000000000000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/tick.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-#include <linux/irqchip/arm-vic.h>
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
- u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
- return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0));
-}
-
-#define TICK_MAX (0xffffffff)
-
-#endif /* __ASM_ARCH_6400_TICK_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/timex.h b/arch/arm/mach-s3c64xx/include/mach/timex.h
deleted file mode 100644
index fb2e8cd4082931255fa4df5dad45a23d4939b002..0000000000000000000000000000000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c64xx/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index ddf65583a5d8153d776c4d9298094d0d4d023865..ae4ea7601f603dbeff5bf278aa6c125a345db45c 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -20,13 +20,13 @@
#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/of.h>
#include <mach/map.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/cpu.h>
#include <plat/pm.h>
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index ddeb0e51a962ada3645114f4115632ccfaeb6767..55eb6a69655bb14e9b69b76587921e5933c7d178 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -20,6 +20,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
@@ -41,7 +42,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 3df3c372ee1f9aa1f1685913e2b00ba123339513..4b0199fff9f59e9390c23a8a703cbf253bd40bf8 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/io.h>
@@ -51,7 +52,6 @@
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
-#include <plat/regs-serial.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 0431016925b9c9b0e0bdbcb1025d534354f02e6c..72cee08c8bf53c0a929135b64546705fb40efd74 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
@@ -33,7 +34,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <mach/gpio-samsung.h>
#include <plat/fb.h>
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 8d553a418e1c9076898878d0a8039f5597804112..9cbc07602ef388cb78a97e0196899c041e7ce927 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -22,6 +22,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/types.h>
#include <asm/mach-types.h>
@@ -38,7 +39,6 @@
#include <plat/fb.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/mmc-sdhci-s3c.h>
-#include <plat/regs-serial.h>
#include <plat/sdhci.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 2067b0bf55b43127eef766b52beb283a11db6431..67f06a9ae656bb3c8955a480ef9298bd490b0dc8 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -16,6 +16,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
@@ -36,7 +37,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/fb.h>
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 5152026f0e191266fc3cf211f0c43dad8388f290..fbad2af1ef1604a46ffa1a06dc0f387ef40006c0 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -23,6 +23,7 @@
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/types.h>
#include <asm/mach-types.h>
@@ -38,7 +39,6 @@
#include <plat/devs.h>
#include <plat/fb.h>
#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 6e72bd5c1d0cc934232ea27d8953a5da8048ecf1..78dd6f73c072fa76c0f1e8a35b5374cec0eca918 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/spi/spi_gpio.h>
#include <linux/usb/gpio_vbus.h>
#include <linux/platform_data/s3c-hsotg.h>
@@ -33,7 +34,6 @@
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/gpio-cfg.h>
#include <linux/platform_data/hwmon-s3c.h>
-#include <plat/regs-serial.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/sdhci.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 150f55fb9e3346500ca144a450bec92eeea7076e..c85d1cbe769f079dfa9800829c8d072041e4d250 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -16,6 +16,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/io.h>
@@ -29,8 +30,6 @@
#include <mach/hardware.h>
#include <mach/map.h>
-#include <plat/regs-serial.h>
-
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 43261d24a0a5c6c141a482d73395a48a27191532..c6a8b2ab0240c6978e705635479f9c84c65940f3 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -19,6 +19,7 @@
#include <linux/init.h>
#include <linux/input.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
@@ -55,7 +56,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/gpio-samsung.h>
#include <linux/platform_data/ata-samsung_cf.h>
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 3db0c98222f7686574be92d880f1ee25e5369e3f..8c42807bf57903ca19d64caf82448570dffee053 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -23,6 +23,7 @@
#include <linux/io.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/of.h>
@@ -34,7 +35,6 @@
#include <asm/irq.h>
#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 72b2278953a896a6dad6ad892e3a1438fd62d882..5be3f09bac92e3395738267b0f7574c4f6a02e3e 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -24,6 +24,7 @@
#include <linux/io.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/of.h>
@@ -35,7 +36,6 @@
#include <asm/irq.h>
#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
#include <plat/cpu.h>
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index f07edc304efb69acc98732b94010e27f473b17b4..9a43be002d784c973524371da5f72d916cc684fa 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
@@ -50,7 +51,6 @@
#include <plat/gpio-cfg.h>
#include <plat/pwm-core.h>
#include <plat/regs-irqtype.h>
-#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
#include "common.h"
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
index 5e2916fb19a9f2f4f6f9c95b222cd7af86b09a28..8759e7882bcb0883e268f11d4ef2b09f705ea6a8 100644
--- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -10,11 +10,10 @@
/* pull in the relevant register and map files. */
+#include <linux/serial_s3c.h>
#include <plat/map-base.h>
#include <plat/map-s5p.h>
-#include <plat/regs-serial.h>
-
.macro addruart, rp, rv, tmp
mov \rp, #0xE0000000
orr \rp, \rp, #0x00100000
diff --git a/arch/arm/mach-s5p64x0/include/mach/timex.h b/arch/arm/mach-s5p64x0/include/mach/timex.h
deleted file mode 100644
index 4b91faa195a85546d03f68e3c97d1dfdc7f7903f..0000000000000000000000000000000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/timex.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/timex.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S5P64X0 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5p64x0/irq-pm.c b/arch/arm/mach-s5p64x0/irq-pm.c
index d5f0fd66b635a631c478ac77c93e1745554e5090..2ed921e095dcfb6b37a9547453115778f9fc142f 100644
--- a/arch/arm/mach-s5p64x0/irq-pm.c
+++ b/arch/arm/mach-s5p64x0/irq-pm.c
@@ -14,9 +14,9 @@
#include <linux/syscore_ops.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
-#include <plat/regs-serial.h>
#include <plat/pm.h>
#include <mach/regs-gpio.h>
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 9efdcc03df3b5477bc51ccb8196f0f7fcccabd97..6840e197cb2db67a00b5e89b4dc5c540ef367d28 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -39,7 +40,6 @@
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index c3cacc067efed25aff9740a2d65b795c4dd59266..fa1341c074ca3a922615dfacf06891cf5bc62d5b 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -17,6 +17,7 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -39,7 +40,6 @@
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
-#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index c5a8eeacf81c1ab8d2b012c9d7d6ddbc93d342e5..6a41bf7dacf6b8f7de9f491d1858ad590ae27264 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/device.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <clocksource/samsung_pwm.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
@@ -49,7 +50,6 @@
#include <plat/onenand-core.h>
#include <plat/pwm-core.h>
#include <plat/spi-core.h>
-#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
#include "common.h"
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index 66cb7f16bf2aa37f9ebfdab4a5ebd38bbf18d821..22c23859e45e20465b014fa2981fde84dea194cf 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -13,8 +13,8 @@
/* pull in the relevant register and map files. */
+#include <linux/serial_s3c.h>
#include <mach/map.h>
-#include <plat/regs-serial.h>
/* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
deleted file mode 100644
index 0af8e41230edca2ce525a4048d15d21358c0a09e..0000000000000000000000000000000000000000
--- a/arch/arm/mach-s5pc100/include/mach/tick.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S3C64XX - Timer tick support definitions
- *
- * Based on mach-s3c6400/include/mach/tick.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-#include <linux/irqchip/arm-vic.h>
-
-/* note, the timer interrutps turn up in 2 places, the vic and then
- * the timer block. We take the VIC as the base at the moment.
- */
-static inline u32 s3c24xx_ostimer_pending(void)
-{
- u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
- return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX (0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/timex.h b/arch/arm/mach-s5pc100/include/mach/timex.h
deleted file mode 100644
index 47ffb17aff962396ecde0be576d0066e817f9df0..0000000000000000000000000000000000000000
--- a/arch/arm/mach-s5pc100/include/mach/timex.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/timex.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C6400 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 9e256b9fc9303a9bf3b5411e0b8d70287254e036..668af3ac31f30a2d2beba748e1d95def5d1d98f8 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -16,6 +16,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
@@ -37,7 +38,6 @@
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <plat/regs-serial.h>
#include <plat/gpio-cfg.h>
#include <plat/clock.h>
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 26027a29b8a155e5e37b60f45e9da93cc60b8b6d..7024dcd0e40af503292ddb9cef510f6ce340f585 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -24,6 +24,7 @@
#include <linux/sched.h>
#include <linux/dma-mapping.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
@@ -46,7 +47,6 @@
#include <plat/pwm-core.h>
#include <plat/tv-core.h>
#include <plat/spi-core.h>
-#include <plat/regs-serial.h>
#include "common.h"
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 80c21996c9434c02453d98570f5160278d1796ed..30b511a580aabae0c11de499cb8e1713ae07c656 100644
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -12,8 +12,8 @@
/* pull in the relevant register and map files. */
+#include <linux/serial_s3c.h>
#include <mach/map.h>
-#include <plat/regs-serial.h>
/* note, for the boot process to work we have to keep the UART
* virtual address aligned to an 1MiB boundary for the L1
diff --git a/arch/arm/mach-s5pv210/include/mach/timex.h b/arch/arm/mach-s5pv210/include/mach/timex.h
deleted file mode 100644
index 73dc85496a83f897babe50aa0769534c8281b461..0000000000000000000000000000000000000000
--- a/arch/arm/mach-s5pv210/include/mach/timex.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/timex.h
- *
- * Copyright (c) 2003-2010 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on arch/arm/mach-s5p6442/include/mach/timex.h
- *
- * S5PV210 - time parameters
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H __FILE__
-
-/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
- * a variable is useless. It seems as long as we make our timers an
- * exact multiple of HZ, any value that makes a 1->1 correspondence
- * for the time conversion functions to/from jiffies is acceptable.
-*/
-
-#define CLOCK_TICK_RATE 12000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index ad40ab0f5dbd37625f2a2e769f871840f644866b..cc37edacda2651ff29a1fcf1871fc1c3dd34a83f 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -12,6 +12,7 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
@@ -32,7 +33,6 @@
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index e5cd9fbf19e99663f8e3ec052e8add96bf7c24e8..b41a38a758441e10fb027b4be5bb8377aad656b1 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -12,6 +12,7 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
@@ -39,7 +40,6 @@
#include <mach/regs-clock.h>
#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/fb.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 7c0ed07a78a3bf9bdb7944e609d1d65a19a1a921..448e1d2eeed6b2ab40b802f57bcaa74230c46f10 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -12,6 +12,7 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/i2c.h>
#include <linux/device.h>
@@ -23,7 +24,6 @@
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/ata-samsung_cf.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index f52cc15c2d85a221a161f5c5d18fbf30c815dd72..2a6655fb63e7b0fe036fdd26cebf11586c75f406 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -13,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/device.h>
#include <linux/dm9000.h>
#include <linux/fb.h>
@@ -32,7 +33,6 @@
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 579afe89842a3b169c9532e46096cfef7c998b9e..157805529f2670bd83aabbc1cd5621a6b719a90d 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -13,6 +13,7 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -22,7 +23,6 @@
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/i2c-s3c2410.h>
diff --git a/arch/arm/mach-sa1100/include/mach/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h
deleted file mode 100644
index 7a5d017b58b3980e2c5c907e53441d493d035b02..0000000000000000000000000000000000000000
--- a/arch/arm/mach-sa1100/include/mach/timex.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/timex.h
- *
- * SA1100 architecture timex specifications
- *
- * Copyright (C) 1998
- */
-
-/*
- * SA1100 timer
- */
-#define CLOCK_TICK_RATE 3686400
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 4852c08cb526b23c2f55e6e253fc90cc7f932884..1dea6cfafb3101710053b51ef9665e0814ac143a 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -9,6 +9,7 @@
*
*/
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
@@ -20,6 +21,9 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
+#define SA1100_CLOCK_FREQ 3686400
+#define SA1100_LATCH DIV_ROUND_CLOSEST(SA1100_CLOCK_FREQ, HZ)
+
static u64 notrace sa1100_read_sched_clock(void)
{
return readl_relaxed(OSCR);
@@ -93,7 +97,7 @@ static void sa1100_timer_resume(struct clock_event_device *cedev)
/*
* OSMR0 is the system timer: make sure OSCR is sufficiently behind
*/
- writel_relaxed(OSMR0 - LATCH, OSCR);
+ writel_relaxed(OSMR0 - SA1100_LATCH, OSCR);
}
#else
#define sa1100_timer_suspend NULL
@@ -128,7 +132,7 @@ void __init sa1100_timer_init(void)
setup_irq(IRQ_OST0, &sa1100_timer_irq);
- clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
+ clocksource_mmio_init(OSCR, "oscr", SA1100_CLOCK_FREQ, 200, 32,
clocksource_mmio_readl_up);
clockevents_config_and_register(&ckevt_sa1100_osmr0, 3686400,
MIN_OSCR_DELTA * 2, 0x7fffffff);
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3b8c87461d6717ca0fc514424de3e443ac3f1990..efd53848947da4ee8a15b9b3b1f4648038f19e71 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -5,18 +5,13 @@ config ARCH_SHMOBILE_MULTI
bool "Renesas ARM SoCs" if ARCH_MULTI_V7
depends on MMU
select ARCH_SHMOBILE
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select ARM_GIC
- select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select NO_IOPORT
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
if ARCH_SHMOBILE_MULTI
diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index f1fb89b76786a690037b154d907c9668707f192b..cabedebd76483920fb03a21d9894da35d1318f9f 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -47,17 +47,10 @@
#define MD(nr) BIT(nr)
-#define FRQMR IOMEM(0xffc80014)
#define MSTPCR0 IOMEM(0xffc80030)
#define MSTPCR1 IOMEM(0xffc80034)
#define MSTPCR3 IOMEM(0xffc8003c)
#define MSTPSR1 IOMEM(0xffc80044)
-#define MSTPSR4 IOMEM(0xffc80048)
-#define MSTPSR6 IOMEM(0xffc8004c)
-#define MSTPCR4 IOMEM(0xffc80050)
-#define MSTPCR5 IOMEM(0xffc80054)
-#define MSTPCR6 IOMEM(0xffc80058)
-#define MSTPCR7 IOMEM(0xffc80040)
#define MODEMR 0xffcc0020
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index e31980590eb452bbc209400d303e9d6d016181d7..cb8e32deb2a3c6cadf7efba9f6cb478daa92c241 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -25,7 +25,6 @@ extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu,
struct task_struct *idle);
extern void shmobile_smp_apmu_cpu_die(unsigned int cpu);
extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu);
-extern void shmobile_invalidate_start(void);
struct clk;
extern int shmobile_clk_init(void);
extern void shmobile_handle_irq_intc(struct pt_regs *);
diff --git a/arch/arm/mach-shmobile/include/mach/timex.h b/arch/arm/mach-shmobile/include/mach/timex.h
deleted file mode 100644
index ae0d8d825c231d393addf96e48405bc212d9ac01..0000000000000000000000000000000000000000
--- a/arch/arm/mach-shmobile/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_MACH_TIMEX_H
-#define __ASM_MACH_TIMEX_H
-
-#define CLOCK_TICK_RATE 1193180 /* unused i8253 PIT value */
-
-#endif /* __ASM_MACH_TIMEX_H */
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index c8f2a1a69a5274bec8eab99f44549fb3bbbae955..c71d667007b8e4e79811da67513ff3b06b6c38c4 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -58,7 +58,7 @@ static void __init emev2_add_standard_devices_dt(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static const char *emev2_boards_compat_dt[] __initdata = {
+static const char *emev2_boards_compat_dt[] __initconst = {
"renesas,emev2",
NULL,
};
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index aee77f06f887da5d8f73e2112333a015640e93ab..b5f8d75d51a0568d603c293df64d403711b77447 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -1,17 +1,10 @@
config ARCH_SOCFPGA
bool "Altera SOCFPGA family" if ARCH_MULTI_V7
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_GIC
select CACHE_L2X0
- select COMMON_CLK
- select CPU_V7
select DW_APB_TIMER_OF
- select GENERIC_CLOCKEVENTS
select GPIO_PL061 if GPIOLIB
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select MFD_SYSCON
- select SPARSE_IRQ
- select USE_OF
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 308d5b5b3055d35f9e17011c8e4e45999c1f33ad..0786249b283250041f3b7aa824d64bc85e08462f 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -8,8 +8,6 @@ menuconfig PLAT_SPEAR
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKSRC_MMIO
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
if PLAT_SPEAR
@@ -18,14 +16,10 @@ config ARCH_SPEAR13XX
depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
select ARCH_HAS_CPUFREQ
select ARM_GIC
- select CPU_V7
select GPIO_SPEAR_SPICS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
- select USE_OF
help
Supports for ARM's SPEAR13XX family
@@ -50,9 +44,7 @@ config ARCH_SPEAR3XX
depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
depends on !ARCH_SPEAR13XX
select ARM_VIC
- select CPU_ARM926T
select PINCTRL
- select USE_OF
help
Supports for ARM's SPEAR3XX family
@@ -83,14 +75,12 @@ config ARCH_SPEAR6XX
depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
depends on !ARCH_SPEAR13XX
select ARM_VIC
- select CPU_ARM926T
help
Supports for ARM's SPEAR6XX family
config MACH_SPEAR600
def_bool y
depends on ARCH_SPEAR6XX
- select USE_OF
help
Supports ST SPEAr600 boards configured via the device-tree
diff --git a/arch/arm/mach-spear/include/mach/timex.h b/arch/arm/mach-spear/include/mach/timex.h
deleted file mode 100644
index ef95e5b780bd04d303748748cb0763e687ffedfb..0000000000000000000000000000000000000000
--- a/arch/arm/mach-spear/include/mach/timex.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/timex.h
- *
- * SPEAr platform specific timex definitions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_TIMEX_H
-#define __PLAT_TIMEX_H
-
-#define CLOCK_TICK_RATE 48000000
-
-#endif /* __PLAT_TIMEX_H */
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index d71654bc8d54d0be5aef108a43d5f0673bd68d40..d2c13ba1190b784b4804132f92dec7692b8a3a0d 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -1,14 +1,10 @@
menuconfig ARCH_STI
bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7
- select GENERIC_CLOCKEVENTS
- select CLKDEV_LOOKUP
select ARM_GIC
select ARM_GLOBAL_TIMER
select PINCTRL
select PINCTRL_ST
select MFD_SYSCON
- select MIGHT_HAVE_CACHE_L2X0
- select HAVE_SMP
select HAVE_ARM_SCU if SMP
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_754322
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index b9d6cad8669b8ea623aa5787de36c80d8caa5621..9de27cfa688fc5fad6e5fc9d2e8a35892a64d1c1 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -5,14 +5,9 @@ config ARCH_SUNXI
select ARM_GIC
select ARM_PSCI
select CLKSRC_MMIO
- select CLKSRC_OF
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select HAVE_SMP
select PINCTRL
select PINCTRL_SUNXI
select RESET_CONTROLLER
- select SPARSE_IRQ
select SUN4I_TIMER
select SUN5I_HSTIMER
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 4926bd11f190fc259c82f0311760baaee3502bc8..92d660f9610f4ca94092a81749e578372731939f 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -5,23 +5,15 @@ config ARCH_TEGRA
select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
select ARM_GIC
select CLKSRC_MMIO
- select CLKSRC_OF
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PINCTRL
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
select SOC_BUS
- select SPARSE_IRQ
select USB_ULPI if USB_PHY
select USB_ULPI_VIEWPORT if USB_PHY
- select USE_OF
help
This enables support for NVIDIA Tegra based systems.
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 8e23071bd1b34ff2a47f729c60721a6fa4a9ec5b..e3a96d7302e9adb402ff2f2e11f0a8bca6210bd6 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -3,20 +3,14 @@ config ARCH_U300
depends on MMU
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
- select ARM_PATCH_PHYS_VIRT
select ARM_VIC
select CLKSRC_MMIO
- select CLKSRC_OF
- select COMMON_CLK
select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
select HAVE_TCM
select PINCTRL
select PINCTRL_COH901
select PINCTRL_U300
- select SPARSE_IRQ
select MFD_SYSCON
- select USE_OF
help
Support for ST-Ericsson U300 series mobile platforms.
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 0034d2cd69734e7cad97bf11cbc4976a3b9790c5..8052bd52450d677db61b645efd41d8ab7d6d9350 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -11,13 +11,8 @@ config ARCH_U8500
select ARM_GIC
select CACHE_L2X0
select CLKSRC_NOMADIK_MTU
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_ABX500
select PINCTRL_NOMADIK
@@ -76,7 +71,6 @@ config UX500_AUTO_PLATFORM
config MACH_UX500_DT
bool "Generic U8500 support using device tree"
depends on MACH_MOP500
- select USE_OF
endmenu
diff --git a/arch/arm/mach-versatile/include/mach/timex.h b/arch/arm/mach-versatile/include/mach/timex.h
deleted file mode 100644
index 426199b1add5319d650dc2f67ddb1a6731210b28..0000000000000000000000000000000000000000
--- a/arch/arm/mach-versatile/include/mach/timex.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/timex.h
- *
- * Versatile architecture timex specifications
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define CLOCK_TICK_RATE (50000000 / 16)
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 4a70be485ff8fe68fd96a9544ac73117d0f27857..80b4be36f10a22bd69840c99e241eabdb756809a 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -5,16 +5,11 @@ config ARCH_VEXPRESS
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
- select COMMON_CLK
select COMMON_CLK_VERSATILE
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_PATA_PLATFORM
- select HAVE_SMP
select ICST
- select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
diff --git a/arch/arm/mach-virt/Kconfig b/arch/arm/mach-virt/Kconfig
deleted file mode 100644
index 081d46929436b528517876da5cc92a2fd7a018be..0000000000000000000000000000000000000000
--- a/arch/arm/mach-virt/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config ARCH_VIRT
- bool "Dummy Virtual Machine" if ARCH_MULTI_V7
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
- select HAVE_ARM_ARCH_TIMER
- select ARM_PSCI
- select HAVE_SMP
- select CPU_V7
- select SPARSE_IRQ
- select USE_OF
diff --git a/arch/arm/mach-virt/Makefile b/arch/arm/mach-virt/Makefile
deleted file mode 100644
index 7ddbfa60227f8e267acc58bca381428fdb99e294..0000000000000000000000000000000000000000
--- a/arch/arm/mach-virt/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y := virt.o
diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c
deleted file mode 100644
index b184e57d1854a552346aba0c985d060ce73775b2..0000000000000000000000000000000000000000
--- a/arch/arm/mach-virt/virt.c
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Dummy Virtual Machine - does what it says on the tin.
- *
- * Copyright (C) 2012 ARM Ltd
- * Authors: Will Deacon <will.deacon@arm.com>,
- * Marc Zyngier <marc.zyngier@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/smp.h>
-
-#include <asm/mach/arch.h>
-
-static void __init virt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *virt_dt_match[] = {
- "linux,dummy-virt",
- "xen,xenvm",
- NULL
-};
-
-DT_MACHINE_START(VIRT, "Dummy Virtual Machine")
- .init_machine = virt_init,
- .dt_compat = virt_dt_match,
-MACHINE_END
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 927be93b692ec37fff6e5944649d1237c25617d8..08f56a41cb553145f72390c64f76cdb39a1ddd15 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -3,8 +3,6 @@ config ARCH_VT8500
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
select VT8500_TIMER
select PINCTRL
help
@@ -21,7 +19,6 @@ config ARCH_WM8750
bool "WonderMedia WM8750"
depends on ARCH_MULTI_V6
select ARCH_VT8500
- select CPU_V6
help
Support for WonderMedia WM8750 System-on-Chip.
@@ -29,6 +26,5 @@ config ARCH_WM8850
bool "WonderMedia WM8850"
depends on ARCH_MULTI_V7
select ARCH_VT8500
- select CPU_V7
help
Support for WonderMedia WM8850 System-on-Chip.
diff --git a/arch/arm/mach-w90x900/include/mach/timex.h b/arch/arm/mach-w90x900/include/mach/timex.h
deleted file mode 100644
index 164dce0b64dbb0a2de1a2a30686f9e41e08053d7..0000000000000000000000000000000000000000
--- a/arch/arm/mach-w90x900/include/mach/timex.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/timex.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/timex.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-/* CLOCK_TICK_RATE Now, I don't use it. */
-
-#define CLOCK_TICK_RATE 15000000
-
-#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index f03e75bd0b2b232f9afdfbbd4ea30e5da95a0adf..0e001a489a794b87a958fd9468a59d3f1b813132 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -4,16 +4,9 @@ config ARCH_ZYNQ
select ARM_GIC
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select ICST
- select MIGHT_HAVE_CACHE_L2X0
- select USE_OF
- select HAVE_SMP
- select SPARSE_IRQ
select CADENCE_TTC_TIMER
select ARM_GLOBAL_TIMER if !CPU_FREQ
help
diff --git a/arch/arm/plat-omap/include/plat/timex.h b/arch/arm/plat-omap/include/plat/timex.h
deleted file mode 100644
index e27d2daa779065f1d6d2ff0cb24a963caf9b74d6..0000000000000000000000000000000000000000
--- a/arch/arm/plat-omap/include/plat/timex.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/timex.h
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
-#define __ASM_ARCH_OMAP_TIMEX_H
-
-#define CLOCK_TICK_RATE (HZ * 100000UL)
-
-#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 47c9fad43f00124ce8e78e3f04b141f716034cd6..ddfebddb4105fd69edcd4e48e00b106265089886 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -52,7 +52,7 @@
#include <plat/cpu.h>
#include <linux/serial_core.h>
-#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */
+#include <linux/serial_s3c.h> /* for s3c24xx_uart_devs */
/* clock information */
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
index 46b426e8aff599636314f3d59bc364dd138e09b9..364963a0a34486ec92975888442650da491a7d9b 100644
--- a/arch/arm/plat-samsung/cpu.c
+++ b/arch/arm/plat-samsung/cpu.c
@@ -28,13 +28,6 @@ unsigned int samsung_rev(void)
}
EXPORT_SYMBOL(samsung_rev);
-void __init s3c24xx_init_cpu(void)
-{
- /* nothing here yet */
-
- samsung_cpu_rev = 0;
-}
-
void __init s3c64xx_init_cpu(void)
{
samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index ac07e871f6a781594ffae471516527e7ea090941..c64a39ac1b04ad582f0eba2fc456025afae17df2 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -18,6 +18,7 @@
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
@@ -64,7 +65,6 @@
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/usb-ohci-s3c2410.h>
#include <plat/usb-phy.h>
-#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
#include <linux/platform_data/spi-s3c64xx.h>
@@ -744,10 +744,7 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
if (!pd) {
pd = &default_i2c_data;
- if (soc_is_exynos4210() ||
- soc_is_exynos4212() || soc_is_exynos4412())
- pd->bus_num = 8;
- else if (soc_is_s5pv210())
+ if (soc_is_s5pv210())
pd->bus_num = 3;
else
pd->bus_num = 0;
@@ -764,10 +761,7 @@ void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
{
struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
- if (soc_is_exynos4210() ||
- soc_is_exynos4212() || soc_is_exynos4412())
- pd->hdmiphy_bus = 8;
- else if (soc_is_s5pv210())
+ if (soc_is_s5pv210())
pd->hdmiphy_bus = 3;
else
pd->hdmiphy_bus = 0;
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 335beb3413556637510b10ced41cc7f0a62f0b48..31164b34d4c44aeb0c44031ee8ca2693e53374de 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -199,7 +199,6 @@ extern void s5p_init_irq(u32 *vic, u32 num_vic);
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
-extern void s3c24xx_init_cpu(void);
extern void s3c64xx_init_cpu(void);
extern void s5p_init_cpu(void __iomem *cpuid_addr);
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
deleted file mode 100644
index f05f2afa440db8bdbf1a84fa0d64d13d2e292e77..0000000000000000000000000000000000000000
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/serial_s3c.h>
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index f48dc0a4736c8d2d1703a29dc0ece5bb9662f3ca..61054fd88d435823d32794eeda9da711364ac02c 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -29,7 +29,7 @@ static void arch_detect_cpu(void);
/* defines for UART registers */
-#include <plat/regs-serial.h>
+#include <linux/serial_s3c.h>
/* working in physical space... */
#define S3C_WDOGREG(x) ((S3C_PA_WDT + (x)))
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index a30df396ca3439e48ecc02af5879eb8361a6c614..c32df1f202eb0bf6920635504cc8046d17bca497 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -21,6 +21,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/platform_device.h>
#include <linux/of.h>
@@ -33,8 +34,6 @@
#include <plat/devs.h>
#include <plat/clock.h>
-#include <plat/regs-serial.h>
-
static struct cpu_table *cpu;
static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode,
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index dd4c15d0d68f821112a6f8d4a69e06668e61246d..da268813901bf21cdfdc1ee23c01a43ddcf574ff 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -196,8 +196,7 @@ struct samsung_gpio_pm samsung_gpio_pm_2bit = {
.resume = samsung_gpio_pm_2bit_resume,
};
-#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) \
- || defined(CONFIG_ARCH_EXYNOS)
+#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
{
chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
@@ -307,7 +306,7 @@ struct samsung_gpio_pm samsung_gpio_pm_4bit = {
.save = samsung_gpio_pm_4bit_save,
.resume = samsung_gpio_pm_4bit_resume,
};
-#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P || CONFIG_ARCH_EXYNOS */
+#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
/**
* samsung_pm_save_gpio() - save gpio chip data for suspend
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index e5b0f2c2d8845d1573e935feada69e47273a23bd..ae9baa2d638145443e4acb8cfb96e84887030285 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -18,13 +18,12 @@
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/serial_core.h>
+#include <linux/serial_s3c.h>
#include <linux/io.h>
#include <asm/cacheflush.h>
#include <asm/suspend.h>
-#include <plat/regs-serial.h>
-
#ifdef CONFIG_SAMSUNG_ATAGS
#include <mach/hardware.h>
#include <mach/map.h>
diff --git a/arch/arm/plat-samsung/s5p-irq-pm.c b/arch/arm/plat-samsung/s5p-irq-pm.c
index 591498035916d0ae91cd4b1d736d7b282908648a..52b16943617e27a6026e40fedbb25a40605ba110 100644
--- a/arch/arm/plat-samsung/s5p-irq-pm.c
+++ b/arch/arm/plat-samsung/s5p-irq-pm.c
@@ -22,10 +22,7 @@
#include <mach/map.h>
#include <mach/regs-gpio.h>
-
-#ifndef CONFIG_ARCH_EXYNOS
#include <mach/regs-irq.h>
-#endif
/* state for IRQs over sleep */
@@ -43,18 +40,8 @@ int s3c_irq_wake(struct irq_data *data, unsigned int state)
unsigned long irqbit;
unsigned int irq_rtc_tic, irq_rtc_alarm;
-#ifdef CONFIG_ARCH_EXYNOS
- if (soc_is_exynos5250()) {
- irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
- irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
- } else {
- irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
- irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
- }
-#else
irq_rtc_tic = IRQ_RTC_TIC;
irq_rtc_alarm = IRQ_RTC_ALARM;
-#endif
if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 52e9329e3c51c05419a2d811ad3ed8fd271baa66..96918e1f26a39bab1d14193114cbdb29f38235b8 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -188,3 +188,6 @@ config EM_TIMER_STI
This enables build of a clocksource and clockevent driver for
the 48-bit System Timer (STI) hardware available on a SoCs
such as EMEV2 from former NEC Electronics.
+
+config CLKSRC_QCOM
+ bool
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index f3fe4cb4974b22dddd3561fc1d9a8d5c568032ed..98cb6c51aa878ba9c43e23f7b2ed161ce037e449 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
+obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
index c2e390efbdca6fc2b71a3e39356ddb9c2156200a..a6ee6d7cd63f19a4cdad01a1a82956f990a76194 100644
--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -25,8 +25,6 @@
#include <linux/of_address.h>
#include <linux/clocksource.h>
-#include <asm/mach/time.h>
-
#define EXYNOS4_MCTREG(x) (x)
#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
diff --git a/arch/arm/mach-msm/timer.c b/drivers/clocksource/qcom-timer.c
similarity index 98%
rename from arch/arm/mach-msm/timer.c
rename to drivers/clocksource/qcom-timer.c
index fd1644987534e6a54db4a7b157f9df817eff222e..e807acf4c665eee3bb85e03c45e823d6609b0992 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/drivers/clocksource/qcom-timer.c
@@ -1,7 +1,7 @@
/*
*
* Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2009-2012,2014, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -26,10 +26,6 @@
#include <linux/of_irq.h>
#include <linux/sched_clock.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-
#define TIMER_MATCH_VAL 0x0000
#define TIMER_COUNT_VAL 0x0004
#define TIMER_ENABLE 0x0008
@@ -110,15 +106,6 @@ static notrace cycle_t msm_read_timer_count(struct clocksource *cs)
return readl_relaxed(source_base + TIMER_COUNT_VAL);
}
-static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
-{
- /*
- * Shift timer count down by a constant due to unreliable lower bits
- * on some targets.
- */
- return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
-}
-
static struct clocksource msm_clocksource = {
.name = "dg_timer",
.rating = 300,
@@ -232,7 +219,7 @@ static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
}
-#ifdef CONFIG_OF
+#ifdef CONFIG_ARCH_QCOM
static void __init msm_dt_timer_init(struct device_node *np)
{
u32 freq;
@@ -285,7 +272,7 @@ static void __init msm_dt_timer_init(struct device_node *np)
}
CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
-#endif
+#else
static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
u32 sts)
@@ -305,6 +292,15 @@ static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
return 0;
}
+static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
+{
+ /*
+ * Shift timer count down by a constant due to unreliable lower bits
+ * on some targets.
+ */
+ return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
+}
+
void __init msm7x01_timer_init(void)
{
struct clocksource *cs = &msm_clocksource;
@@ -331,3 +327,4 @@ void __init qsd8x50_timer_init(void)
return;
msm_timer_init(19200000 / 4, 32, 7, false);
}
+#endif
diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c
index 09a17d9a6594c80e38c64bd18d6827db427df18b..b52e1c078b9955330dda32f803a26e8fa1527ab7 100644
--- a/drivers/clocksource/timer-marco.c
+++ b/drivers/clocksource/timer-marco.c
@@ -19,7 +19,8 @@
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/sched_clock.h>
-#include <asm/mach/time.h>
+
+#define MARCO_CLOCK_FREQ 1000000
#define SIRFSOC_TIMER_32COUNTER_0_CTRL 0x0000
#define SIRFSOC_TIMER_32COUNTER_1_CTRL 0x0004
@@ -191,7 +192,7 @@ static int sirfsoc_local_timer_setup(struct clock_event_device *ce)
ce->rating = 200;
ce->set_mode = sirfsoc_timer_set_mode;
ce->set_next_event = sirfsoc_timer_set_next_event;
- clockevents_calc_mult_shift(ce, CLOCK_TICK_RATE, 60);
+ clockevents_calc_mult_shift(ce, MARCO_CLOCK_FREQ, 60);
ce->max_delta_ns = clockevent_delta2ns(-2, ce);
ce->min_delta_ns = clockevent_delta2ns(2, ce);
ce->cpumask = cpumask_of(cpu);
@@ -263,11 +264,11 @@ static void __init sirfsoc_marco_timer_init(void)
BUG_ON(IS_ERR(clk));
rate = clk_get_rate(clk);
- BUG_ON(rate < CLOCK_TICK_RATE);
- BUG_ON(rate % CLOCK_TICK_RATE);
+ BUG_ON(rate < MARCO_CLOCK_FREQ);
+ BUG_ON(rate % MARCO_CLOCK_FREQ);
/* Initialize the timer dividers */
- timer_div = rate / CLOCK_TICK_RATE - 1;
+ timer_div = rate / MARCO_CLOCK_FREQ - 1;
writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL);
writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL);
@@ -283,7 +284,7 @@ static void __init sirfsoc_marco_timer_init(void)
/* Clear all interrupts */
writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
- BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+ BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, MARCO_CLOCK_FREQ));
sirfsoc_clockevent_init();
}
diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index 8a492d34ff9f52813655b056bad5c17f9c305220..1a6b2d6356d630ca65cca3f988d39d553171c038 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -21,6 +21,8 @@
#include <linux/sched_clock.h>
#include <asm/mach/time.h>
+#define PRIMA2_CLOCK_FREQ 1000000
+
#define SIRFSOC_TIMER_COUNTER_LO 0x0000
#define SIRFSOC_TIMER_COUNTER_HI 0x0004
#define SIRFSOC_TIMER_MATCH_0 0x0008
@@ -173,7 +175,7 @@ static u64 notrace sirfsoc_read_sched_clock(void)
static void __init sirfsoc_clockevent_init(void)
{
sirfsoc_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE,
+ clockevents_config_and_register(&sirfsoc_clockevent, PRIMA2_CLOCK_FREQ,
2, -2);
}
@@ -190,8 +192,8 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
rate = clk_get_rate(clk);
- BUG_ON(rate < CLOCK_TICK_RATE);
- BUG_ON(rate % CLOCK_TICK_RATE);
+ BUG_ON(rate < PRIMA2_CLOCK_FREQ);
+ BUG_ON(rate % PRIMA2_CLOCK_FREQ);
sirfsoc_timer_base = of_iomap(np, 0);
if (!sirfsoc_timer_base)
@@ -199,14 +201,16 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
- writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
+ writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1,
+ sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
- BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+ BUG_ON(clocksource_register_hz(&sirfsoc_clocksource,
+ PRIMA2_CLOCK_FREQ));
- sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE);
+ sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ);
BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
index 17ccba88d636af381acd020a4d02b1f557babb64..ed8e5e8449d39a440d3c9390f33ec475a27bd7f8 100644
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ b/drivers/input/misc/ixp4xx-beeper.c
@@ -67,7 +67,7 @@ static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned
}
if (value > 20 && value < 32767)
- count = (IXP4XX_TIMER_FREQ / (value * 4)) - 1;
+ count = (ixp4xx_timer_freq / (value * 4)) - 1;
ixp4xx_spkr_control(pin, count);
diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-combiner.c
index 40e6440348ff5d9ace76ff17510bbf40ae648415..f8636a650cf6489a16d21b09df4e6c49127c5299 100644
--- a/drivers/irqchip/exynos-combiner.c
+++ b/drivers/irqchip/exynos-combiner.c
@@ -17,7 +17,6 @@
#include <linux/irqchip/chained_irq.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <asm/mach/irq.h>
#include "irqchip.h"
@@ -81,7 +80,7 @@ static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
cascade_irq = irq_find_mapping(combiner_irq_domain, combiner_irq);
if (unlikely(!cascade_irq))
- do_bad_IRQ(irq, desc);
+ handle_bad_irq(irq, desc);
else
generic_handle_irq(cascade_irq);
diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c
index 3c8827fe83f37544a9a5b1e8a01ae1486c7c4440..1c3e2c9b46bae59c96e9f2851d988af4d13b33c6 100644
--- a/drivers/irqchip/irq-mmp.c
+++ b/drivers/irqchip/irq-mmp.c
@@ -22,7 +22,7 @@
#include <linux/of_irq.h>
#include <asm/exception.h>
-#include <asm/mach/irq.h>
+#include <asm/hardirq.h>
#include "irqchip.h"
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index 309b8b342d9c885ef544e53fc28688d988cd3573..59637430453226c0a7526c44bdba2a3b529030e6 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -24,7 +24,7 @@
#include <mach/at91_rtt.h>
#include <mach/cpu.h>
-
+#include <mach/hardware.h>
/*
* This driver uses two configurable hardware resources that live in the
diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c
index a355f2b82bb8f24e6fb27346890b92bd0e02d584..cccbf9d89729a51b517aa9948541127627a51885 100644
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -32,7 +32,6 @@
#include <mach/hardware.h>
-#define TIMER_FREQ CLOCK_TICK_RATE
#define RTC_DEF_DIVIDER (32768 - 1)
#define RTC_DEF_TRIM 0
#define MAXFREQ_PERIODIC 1000
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index b0603e1f7d82002195ada10d4a0f478f1b6a194f..53eeea13ff165fe93609d5a3d34fb27efaf280e9 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -35,21 +35,18 @@
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/dma-mapping.h>
#include <linux/atmel_pdc.h>
#include <linux/atmel_serial.h>
#include <linux/uaccess.h>
#include <linux/platform_data/atmel.h>
#include <linux/timer.h>
+#include <linux/gpio.h>
#include <asm/io.h>
#include <asm/ioctls.h>
-#ifdef CONFIG_ARM
-#include <mach/cpu.h>
-#include <asm/gpio.h>
-#endif
-
#define PDC_BUFFER_SIZE 512
/* Revisit: We should calculate this based on the actual port settings */
#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
@@ -165,6 +162,7 @@ struct atmel_uart_port {
struct circ_buf rx_ring;
struct serial_rs485 rs485; /* rs485 settings */
+ int rts_gpio; /* optional RTS GPIO */
unsigned int tx_done_mask;
bool is_usart; /* usart or uart */
struct timer_list uart_timer; /* uart timer */
@@ -298,20 +296,16 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
unsigned int mode;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
-#ifdef CONFIG_ARCH_AT91RM9200
- if (cpu_is_at91rm9200()) {
- /*
- * AT91RM9200 Errata #39: RTS0 is not internally connected
- * to PA21. We need to drive the pin manually.
- */
- if (port->mapbase == AT91RM9200_BASE_US0) {
- if (mctrl & TIOCM_RTS)
- at91_set_gpio_value(AT91_PIN_PA21, 0);
- else
- at91_set_gpio_value(AT91_PIN_PA21, 1);
- }
+ /*
+ * AT91RM9200 Errata #39: RTS0 is not internally connected
+ * to PA21. We need to drive the pin as a GPIO.
+ */
+ if (gpio_is_valid(atmel_port->rts_gpio)) {
+ if (mctrl & TIOCM_RTS)
+ gpio_set_value(atmel_port->rts_gpio, 0);
+ else
+ gpio_set_value(atmel_port->rts_gpio, 1);
}
-#endif
if (mctrl & TIOCM_RTS)
control |= ATMEL_US_RTSEN;
@@ -2365,6 +2359,25 @@ static int atmel_serial_probe(struct platform_device *pdev)
port = &atmel_ports[ret];
port->backup_imr = 0;
port->uart.line = ret;
+ port->rts_gpio = -EINVAL; /* Invalid, zero could be valid */
+ if (pdata)
+ port->rts_gpio = pdata->rts_gpio;
+ else if (np)
+ port->rts_gpio = of_get_named_gpio(np, "rts-gpios", 0);
+
+ if (gpio_is_valid(port->rts_gpio)) {
+ ret = devm_gpio_request(&pdev->dev, port->rts_gpio, "RTS");
+ if (ret) {
+ dev_err(&pdev->dev, "error requesting RTS GPIO\n");
+ goto err;
+ }
+ /* Default to 1 as RTS is active low */
+ ret = gpio_direction_output(port->rts_gpio, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "error setting up RTS GPIO\n");
+ goto err;
+ }
+ }
ret = atmel_init_port(port, pdev);
if (ret)
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
index cea9f70133c521f1d5fb2a0d459f3e30ca3f9576..e26b0c14edea9c0864e6ebc4178537dc7a8eee75 100644
--- a/include/linux/platform_data/atmel.h
+++ b/include/linux/platform_data/atmel.h
@@ -84,6 +84,7 @@ struct atmel_uart_data {
short use_dma_rx; /* use receive DMA? */
void __iomem *regs; /* virt. base address, if any */
struct serial_rs485 rs485; /* rs485 settings */
+ int rts_gpio; /* optional RTS GPIO */
};
/* Touchscreen Controller */