socket.c

			return -EINVAL;
		}
		addrcnt++;
		addr_buf += af->sockaddr_len;
		walk_size += af->sockaddr_len;
	}

	/* Do the work. */
	switch (op) {
	case SCTP_BINDX_ADD_ADDR:
		err = sctp_bindx_add(sk, kaddrs, addrcnt);
		if (err)
			goto out;
		err = sctp_send_asconf_add_ip(sk, kaddrs, addrcnt);
		break;

	case SCTP_BINDX_REM_ADDR:
		err = sctp_bindx_rem(sk, kaddrs, addrcnt);
		if (err)
			goto out;
		err = sctp_send_asconf_del_ip(sk, kaddrs, addrcnt);
		break;

	default:
		err = -EINVAL;
		break;
	}

out:
	kfree(kaddrs);

	return err;
}

/* __sctp_connect(struct sock* sk, struct sockaddr *kaddrs, int addrs_size)
 *
 * Common routine for handling connect() and sctp_connectx().
 * Connect will come in with just a single address.
 */
static int __sctp_connect(struct sock* sk,
			  struct sockaddr *kaddrs,
			  int addrs_size,
			  sctp_assoc_t *assoc_id)
{
	struct net *net = sock_net(sk);
	struct sctp_sock *sp;
	struct sctp_endpoint *ep;
	struct sctp_association *asoc = NULL;
	struct sctp_association *asoc2;
	struct sctp_transport *transport;
	union sctp_addr to;
	struct sctp_af *af;
	sctp_scope_t scope;
	long timeo;
	int err = 0;
	int addrcnt = 0;
	int walk_size = 0;
	union sctp_addr *sa_addr = NULL;
	void *addr_buf;
	unsigned short port;
	unsigned int f_flags = 0;

	sp = sctp_sk(sk);
	ep = sp->ep;

	/* connect() cannot be done on a socket that is already in ESTABLISHED
	 * state - UDP-style peeled off socket or a TCP-style socket that
	 * is already connected.
	 * It cannot be done even on a TCP-style listening socket.
	 */
	if (sctp_sstate(sk, ESTABLISHED) ||
	    (sctp_style(sk, TCP) && sctp_sstate(sk, LISTENING))) {
		err = -EISCONN;
		goto out_free;
	}

	/* Walk through the addrs buffer and count the number of addresses. */
	addr_buf = kaddrs;
	while (walk_size < addrs_size) {
		if (walk_size + sizeof(sa_family_t) > addrs_size) {
			err = -EINVAL;
			goto out_free;
		}

		sa_addr = addr_buf;
		af = sctp_get_af_specific(sa_addr->sa.sa_family);

		/* If the address family is not supported or if this address
		 * causes the address buffer to overflow return EINVAL.
		 */
		if (!af || (walk_size + af->sockaddr_len) > addrs_size) {
			err = -EINVAL;
			goto out_free;
		}

		port = ntohs(sa_addr->v4.sin_port);

		/* Save current address so we can work with it */
		memcpy(&to, sa_addr, af->sockaddr_len);

		err = sctp_verify_addr(sk, &to, af->sockaddr_len);
		if (err)
			goto out_free;

		/* Make sure the destination port is correctly set
		 * in all addresses.
		 */
		if (asoc && asoc->peer.port && asoc->peer.port != port) {
			err = -EINVAL;
			goto out_free;
		}

		/* Check if there already is a matching association on the
		 * endpoint (other than the one created here).
		 */
		asoc2 = sctp_endpoint_lookup_assoc(ep, &to, &transport);
		if (asoc2 && asoc2 != asoc) {
			if (asoc2->state >= SCTP_STATE_ESTABLISHED)
				err = -EISCONN;
			else
				err = -EALREADY;
			goto out_free;
		}

		/* If we could not find a matching association on the endpoint,
		 * make sure that there is no peeled-off association matching
		 * the peer address even on another socket.
		 */
		if (sctp_endpoint_is_peeled_off(ep, &to)) {
			err = -EADDRNOTAVAIL;
			goto out_free;
		}

		if (!asoc) {
			/* If a bind() or sctp_bindx() is not called prior to
			 * an sctp_connectx() call, the system picks an
			 * ephemeral port and will choose an address set
			 * equivalent to binding with a wildcard address.
			 */
			if (!ep->base.bind_addr.port) {
				if (sctp_autobind(sk)) {
					err = -EAGAIN;
					goto out_free;
				}
			} else {
				/*
				 * If an unprivileged user inherits a 1-many
				 * style socket with open associations on a
				 * privileged port, it MAY be permitted to
				 * accept new associations, but it SHOULD NOT
				 * be permitted to open new associations.
				 */
				if (ep->base.bind_addr.port < PROT_SOCK &&
				    !ns_capable(net->user_ns, CAP_NET_BIND_SERVICE)) {
					err = -EACCES;
					goto out_free;
				}
			}

			scope = sctp_scope(&to);
			asoc = sctp_association_new(ep, sk, scope, GFP_KERNEL);
			if (!asoc) {
				err = -ENOMEM;
				goto out_free;
			}

			err = sctp_assoc_set_bind_addr_from_ep(asoc, scope,
							      GFP_KERNEL);
			if (err < 0) {
				goto out_free;
			}

		}

		/* Prime the peer's transport structures.  */
		transport = sctp_assoc_add_peer(asoc, &to, GFP_KERNEL,
						SCTP_UNKNOWN);
		if (!transport) {
			err = -ENOMEM;
			goto out_free;
		}

		addrcnt++;
		addr_buf += af->sockaddr_len;
		walk_size += af->sockaddr_len;
	}

	/* In case the user of sctp_connectx() wants an association
	 * id back, assign one now.
	 */
	if (assoc_id) {
		err = sctp_assoc_set_id(asoc, GFP_KERNEL);
		if (err < 0)
			goto out_free;
	}

	err = sctp_primitive_ASSOCIATE(net, asoc, NULL);
	if (err < 0) {
		goto out_free;
	}

	/* Initialize sk's dport and daddr for getpeername() */
	inet_sk(sk)->inet_dport = htons(asoc->peer.port);
	af = sctp_get_af_specific(sa_addr->sa.sa_family);
	af->to_sk_daddr(sa_addr, sk);
	sk->sk_err = 0;

	/* in-kernel sockets don't generally have a file allocated to them
	 * if all they do is call sock_create_kern().
	 */
	if (sk->sk_socket->file)
		f_flags = sk->sk_socket->file->f_flags;

	timeo = sock_sndtimeo(sk, f_flags & O_NONBLOCK);

	err = sctp_wait_for_connect(asoc, &timeo);
	if ((err == 0 || err == -EINPROGRESS) && assoc_id)
		*assoc_id = asoc->assoc_id;

	/* Don't free association on exit. */
	asoc = NULL;

out_free:
	pr_debug("%s: took out_free path with asoc:%p kaddrs:%p err:%d\n",
		 __func__, asoc, kaddrs, err);

	if (asoc) {
		/* sctp_primitive_ASSOCIATE may have added this association
		 * To the hash table, try to unhash it, just in case, its a noop
		 * if it wasn't hashed so we're safe
		 */
		sctp_unhash_established(asoc);
		sctp_association_free(asoc);
	}
	return err;
}

/* Helper for tunneling sctp_connectx() requests through sctp_setsockopt()
 *
 * API 8.9
 * int sctp_connectx(int sd, struct sockaddr *addrs, int addrcnt,
 * 			sctp_assoc_t *asoc);
 *
 * If sd is an IPv4 socket, the addresses passed must be IPv4 addresses.
 * If the sd is an IPv6 socket, the addresses passed can either be IPv4
 * or IPv6 addresses.
 *
 * A single address may be specified as INADDR_ANY or IN6ADDR_ANY, see
 * Section 3.1.2 for this usage.
 *
 * addrs is a pointer to an array of one or more socket addresses. Each
 * address is contained in its appropriate structure (i.e. struct
 * sockaddr_in or struct sockaddr_in6) the family of the address type
 * must be used to distengish the address length (note that this
 * representation is termed a "packed array" of addresses). The caller
 * specifies the number of addresses in the array with addrcnt.
 *
 * On success, sctp_connectx() returns 0. It also sets the assoc_id to
 * the association id of the new association.  On failure, sctp_connectx()
 * returns -1, and sets errno to the appropriate error code.  The assoc_id
 * is not touched by the kernel.
 *
 * For SCTP, the port given in each socket address must be the same, or
 * sctp_connectx() will fail, setting errno to EINVAL.
 *
 * An application can use sctp_connectx to initiate an association with
 * an endpoint that is multi-homed.  Much like sctp_bindx() this call
 * allows a caller to specify multiple addresses at which a peer can be
 * reached.  The way the SCTP stack uses the list of addresses to set up
 * the association is implementation dependent.  This function only
 * specifies that the stack will try to make use of all the addresses in
 * the list when needed.
 *
 * Note that the list of addresses passed in is only used for setting up
 * the association.  It does not necessarily equal the set of addresses
 * the peer uses for the resulting association.  If the caller wants to
 * find out the set of peer addresses, it must use sctp_getpaddrs() to
 * retrieve them after the association has been set up.
 *
 * Basically do nothing but copying the addresses from user to kernel
 * land and invoking either sctp_connectx(). This is used for tunneling
 * the sctp_connectx() request through sctp_setsockopt() from userspace.
 *
 * We don't use copy_from_user() for optimization: we first do the
 * sanity checks (buffer size -fast- and access check-healthy
 * pointer); if all of those succeed, then we can alloc the memory
 * (expensive operation) needed to copy the data to kernel. Then we do
 * the copying without checking the user space area
 * (__copy_from_user()).
 *
 * On exit there is no need to do sockfd_put(), sys_setsockopt() does
 * it.
 *
 * sk        The sk of the socket
 * addrs     The pointer to the addresses in user land
 * addrssize Size of the addrs buffer
 *
 * Returns >=0 if ok, <0 errno code on error.
 */
static int __sctp_setsockopt_connectx(struct sock* sk,
				      struct sockaddr __user *addrs,
				      int addrs_size,
				      sctp_assoc_t *assoc_id)
{
	int err = 0;
	struct sockaddr *kaddrs;

	pr_debug("%s: sk:%p addrs:%p addrs_size:%d\n",
		 __func__, sk, addrs, addrs_size);

	if (unlikely(addrs_size <= 0))
		return -EINVAL;

	/* Check the user passed a healthy pointer.  */
	if (unlikely(!access_ok(VERIFY_READ, addrs, addrs_size)))
		return -EFAULT;

	/* Alloc space for the address array in kernel memory.  */
	kaddrs = kmalloc(addrs_size, GFP_KERNEL);
	if (unlikely(!kaddrs))
		return -ENOMEM;

	if (__copy_from_user(kaddrs, addrs, addrs_size)) {
		err = -EFAULT;
	} else {
		err = __sctp_connect(sk, kaddrs, addrs_size, assoc_id);
	}

	kfree(kaddrs);

	return err;
}

/*
 * This is an older interface.  It's kept for backward compatibility
 * to the option that doesn't provide association id.
 */
static int sctp_setsockopt_connectx_old(struct sock* sk,
					struct sockaddr __user *addrs,
					int addrs_size)
{
	return __sctp_setsockopt_connectx(sk, addrs, addrs_size, NULL);
}

/*
 * New interface for the API.  The since the API is done with a socket
 * option, to make it simple we feed back the association id is as a return
 * indication to the call.  Error is always negative and association id is
 * always positive.
 */
static int sctp_setsockopt_connectx(struct sock* sk,
				    struct sockaddr __user *addrs,
				    int addrs_size)
{
	sctp_assoc_t assoc_id = 0;
	int err = 0;

	err = __sctp_setsockopt_connectx(sk, addrs, addrs_size, &assoc_id);

	if (err)
		return err;
	else
		return assoc_id;
}

/*
 * New (hopefully final) interface for the API.
 * We use the sctp_getaddrs_old structure so that use-space library
 * can avoid any unnecessary allocations.   The only defferent part
 * is that we store the actual length of the address buffer into the
 * addrs_num structure member.  That way we can re-use the existing
 * code.
 */
static int sctp_getsockopt_connectx3(struct sock* sk, int len,
				     char __user *optval,
				     int __user *optlen)
{
	struct sctp_getaddrs_old param;
	sctp_assoc_t assoc_id = 0;
	int err = 0;

	if (len < sizeof(param))
		return -EINVAL;

	if (copy_from_user(&param, optval, sizeof(param)))
		return -EFAULT;

	err = __sctp_setsockopt_connectx(sk,
			(struct sockaddr __user *)param.addrs,
			param.addr_num, &assoc_id);

	if (err == 0 || err == -EINPROGRESS) {
		if (copy_to_user(optval, &assoc_id, sizeof(assoc_id)))
			return -EFAULT;
		if (put_user(sizeof(assoc_id), optlen))
			return -EFAULT;
	}

	return err;
}

/* API 3.1.4 close() - UDP Style Syntax
 * Applications use close() to perform graceful shutdown (as described in
 * Section 10.1 of [SCTP]) on ALL the associations currently represented
 * by a UDP-style socket.
 *
 * The syntax is
 *
 *   ret = close(int sd);
 *
 *   sd      - the socket descriptor of the associations to be closed.
 *
 * To gracefully shutdown a specific association represented by the
 * UDP-style socket, an application should use the sendmsg() call,
 * passing no user data, but including the appropriate flag in the
 * ancillary data (see Section xxxx).
 *
 * If sd in the close() call is a branched-off socket representing only
 * one association, the shutdown is performed on that association only.
 *
 * 4.1.6 close() - TCP Style Syntax
 *
 * Applications use close() to gracefully close down an association.
 *
 * The syntax is:
 *
 *    int close(int sd);
 *
 *      sd      - the socket descriptor of the association to be closed.
 *
 * After an application calls close() on a socket descriptor, no further
 * socket operations will succeed on that descriptor.
 *
 * API 7.1.4 SO_LINGER
 *
 * An application using the TCP-style socket can use this option to
 * perform the SCTP ABORT primitive.  The linger option structure is:
 *
 *  struct  linger {
 *     int     l_onoff;                // option on/off
 *     int     l_linger;               // linger time
 * };
 *
 * To enable the option, set l_onoff to 1.  If the l_linger value is set
 * to 0, calling close() is the same as the ABORT primitive.  If the
 * value is set to a negative value, the setsockopt() call will return
 * an error.  If the value is set to a positive value linger_time, the
 * close() can be blocked for at most linger_time ms.  If the graceful
 * shutdown phase does not finish during this period, close() will
 * return but the graceful shutdown phase continues in the system.
 */
static void sctp_close(struct sock *sk, long timeout)
{
	struct net *net = sock_net(sk);
	struct sctp_endpoint *ep;
	struct sctp_association *asoc;
	struct list_head *pos, *temp;
	unsigned int data_was_unread;

	pr_debug("%s: sk:%p, timeout:%ld\n", __func__, sk, timeout);

	sctp_lock_sock(sk);
	sk->sk_shutdown = SHUTDOWN_MASK;
	sk->sk_state = SCTP_SS_CLOSING;

	ep = sctp_sk(sk)->ep;

	/* Clean up any skbs sitting on the receive queue.  */
	data_was_unread = sctp_queue_purge_ulpevents(&sk->sk_receive_queue);
	data_was_unread += sctp_queue_purge_ulpevents(&sctp_sk(sk)->pd_lobby);

	/* Walk all associations on an endpoint.  */
	list_for_each_safe(pos, temp, &ep->asocs) {
		asoc = list_entry(pos, struct sctp_association, asocs);

		if (sctp_style(sk, TCP)) {
			/* A closed association can still be in the list if
			 * it belongs to a TCP-style listening socket that is
			 * not yet accepted. If so, free it. If not, send an
			 * ABORT or SHUTDOWN based on the linger options.
			 */
			if (sctp_state(asoc, CLOSED)) {
				sctp_unhash_established(asoc);
				sctp_association_free(asoc);
				continue;
			}
		}

		if (data_was_unread || !skb_queue_empty(&asoc->ulpq.lobby) ||
		    !skb_queue_empty(&asoc->ulpq.reasm) ||
		    (sock_flag(sk, SOCK_LINGER) && !sk->sk_lingertime)) {
			struct sctp_chunk *chunk;

			chunk = sctp_make_abort_user(asoc, NULL, 0);
			if (chunk)
				sctp_primitive_ABORT(net, asoc, chunk);
		} else
			sctp_primitive_SHUTDOWN(net, asoc, NULL);
	}

	/* On a TCP-style socket, block for at most linger_time if set. */
	if (sctp_style(sk, TCP) && timeout)
		sctp_wait_for_close(sk, timeout);

	/* This will run the backlog queue.  */
	sctp_release_sock(sk);

	/* Supposedly, no process has access to the socket, but
	 * the net layers still may.
	 */
	sctp_local_bh_disable();
	sctp_bh_lock_sock(sk);

	/* Hold the sock, since sk_common_release() will put sock_put()
	 * and we have just a little more cleanup.
	 */
	sock_hold(sk);
	sk_common_release(sk);

	sctp_bh_unlock_sock(sk);
	sctp_local_bh_enable();

	sock_put(sk);

	SCTP_DBG_OBJCNT_DEC(sock);
}

/* Handle EPIPE error. */
static int sctp_error(struct sock *sk, int flags, int err)
{
	if (err == -EPIPE)
		err = sock_error(sk) ? : -EPIPE;
	if (err == -EPIPE && !(flags & MSG_NOSIGNAL))
		send_sig(SIGPIPE, current, 0);
	return err;
}

/* API 3.1.3 sendmsg() - UDP Style Syntax
 *
 * An application uses sendmsg() and recvmsg() calls to transmit data to
 * and receive data from its peer.
 *
 *  ssize_t sendmsg(int socket, const struct msghdr *message,
 *                  int flags);
 *
 *  socket  - the socket descriptor of the endpoint.
 *  message - pointer to the msghdr structure which contains a single
 *            user message and possibly some ancillary data.
 *
 *            See Section 5 for complete description of the data
 *            structures.
 *
 *  flags   - flags sent or received with the user message, see Section
 *            5 for complete description of the flags.
 *
 * Note:  This function could use a rewrite especially when explicit
 * connect support comes in.
 */
/* BUG:  We do not implement the equivalent of sk_stream_wait_memory(). */

static int sctp_msghdr_parse(const struct msghdr *, sctp_cmsgs_t *);

static int sctp_sendmsg(struct kiocb *iocb, struct sock *sk,
			struct msghdr *msg, size_t msg_len)
{
	struct net *net = sock_net(sk);
	struct sctp_sock *sp;
	struct sctp_endpoint *ep;
	struct sctp_association *new_asoc=NULL, *asoc=NULL;
	struct sctp_transport *transport, *chunk_tp;
	struct sctp_chunk *chunk;
	union sctp_addr to;
	struct sockaddr *msg_name = NULL;
	struct sctp_sndrcvinfo default_sinfo;
	struct sctp_sndrcvinfo *sinfo;
	struct sctp_initmsg *sinit;
	sctp_assoc_t associd = 0;
	sctp_cmsgs_t cmsgs = { NULL };
	int err;
	sctp_scope_t scope;
	long timeo;
	__u16 sinfo_flags = 0;
	struct sctp_datamsg *datamsg;
	int msg_flags = msg->msg_flags;

	err = 0;
	sp = sctp_sk(sk);
	ep = sp->ep;

	pr_debug("%s: sk:%p, msg:%p, msg_len:%zu ep:%p\n", __func__, sk,
		 msg, msg_len, ep);

	/* We cannot send a message over a TCP-style listening socket. */
	if (sctp_style(sk, TCP) && sctp_sstate(sk, LISTENING)) {
		err = -EPIPE;
		goto out_nounlock;
	}

	/* Parse out the SCTP CMSGs.  */
	err = sctp_msghdr_parse(msg, &cmsgs);
	if (err) {
		pr_debug("%s: msghdr parse err:%x\n", __func__, err);
		goto out_nounlock;
	}

	/* Fetch the destination address for this packet.  This
	 * address only selects the association--it is not necessarily
	 * the address we will send to.
	 * For a peeled-off socket, msg_name is ignored.
	 */
	if (!sctp_style(sk, UDP_HIGH_BANDWIDTH) && msg->msg_name) {
		int msg_namelen = msg->msg_namelen;

		err = sctp_verify_addr(sk, (union sctp_addr *)msg->msg_name,
				       msg_namelen);
		if (err)
			return err;

		if (msg_namelen > sizeof(to))
			msg_namelen = sizeof(to);
		memcpy(&to, msg->msg_name, msg_namelen);
		msg_name = msg->msg_name;
	}

	sinfo = cmsgs.info;
	sinit = cmsgs.init;

	/* Did the user specify SNDRCVINFO?  */
	if (sinfo) {
		sinfo_flags = sinfo->sinfo_flags;
		associd = sinfo->sinfo_assoc_id;
	}

	pr_debug("%s: msg_len:%zu, sinfo_flags:0x%x\n", __func__,
		 msg_len, sinfo_flags);

	/* SCTP_EOF or SCTP_ABORT cannot be set on a TCP-style socket. */
	if (sctp_style(sk, TCP) && (sinfo_flags & (SCTP_EOF | SCTP_ABORT))) {
		err = -EINVAL;
		goto out_nounlock;
	}

	/* If SCTP_EOF is set, no data can be sent. Disallow sending zero
	 * length messages when SCTP_EOF|SCTP_ABORT is not set.
	 * If SCTP_ABORT is set, the message length could be non zero with
	 * the msg_iov set to the user abort reason.
	 */
	if (((sinfo_flags & SCTP_EOF) && (msg_len > 0)) ||
	    (!(sinfo_flags & (SCTP_EOF|SCTP_ABORT)) && (msg_len == 0))) {
		err = -EINVAL;
		goto out_nounlock;
	}

	/* If SCTP_ADDR_OVER is set, there must be an address
	 * specified in msg_name.
	 */
	if ((sinfo_flags & SCTP_ADDR_OVER) && (!msg->msg_name)) {
		err = -EINVAL;
		goto out_nounlock;
	}

	transport = NULL;

	pr_debug("%s: about to look up association\n", __func__);

	sctp_lock_sock(sk);

	/* If a msg_name has been specified, assume this is to be used.  */
	if (msg_name) {
		/* Look for a matching association on the endpoint. */
		asoc = sctp_endpoint_lookup_assoc(ep, &to, &transport);
		if (!asoc) {
			/* If we could not find a matching association on the
			 * endpoint, make sure that it is not a TCP-style
			 * socket that already has an association or there is
			 * no peeled-off association on another socket.
			 */
			if ((sctp_style(sk, TCP) &&
			     sctp_sstate(sk, ESTABLISHED)) ||
			    sctp_endpoint_is_peeled_off(ep, &to)) {
				err = -EADDRNOTAVAIL;
				goto out_unlock;
			}
		}
	} else {
		asoc = sctp_id2assoc(sk, associd);
		if (!asoc) {
			err = -EPIPE;
			goto out_unlock;
		}
	}

	if (asoc) {
		pr_debug("%s: just looked up association:%p\n", __func__, asoc);

		/* We cannot send a message on a TCP-style SCTP_SS_ESTABLISHED
		 * socket that has an association in CLOSED state. This can
		 * happen when an accepted socket has an association that is
		 * already CLOSED.
		 */
		if (sctp_state(asoc, CLOSED) && sctp_style(sk, TCP)) {
			err = -EPIPE;
			goto out_unlock;
		}

		if (sinfo_flags & SCTP_EOF) {
			pr_debug("%s: shutting down association:%p\n",
				 __func__, asoc);

			sctp_primitive_SHUTDOWN(net, asoc, NULL);
			err = 0;
			goto out_unlock;
		}
		if (sinfo_flags & SCTP_ABORT) {

			chunk = sctp_make_abort_user(asoc, msg, msg_len);
			if (!chunk) {
				err = -ENOMEM;
				goto out_unlock;
			}

			pr_debug("%s: aborting association:%p\n",
				 __func__, asoc);

			sctp_primitive_ABORT(net, asoc, chunk);
			err = 0;
			goto out_unlock;
		}
	}

	/* Do we need to create the association?  */
	if (!asoc) {
		pr_debug("%s: there is no association yet\n", __func__);

		if (sinfo_flags & (SCTP_EOF | SCTP_ABORT)) {
			err = -EINVAL;
			goto out_unlock;
		}

		/* Check for invalid stream against the stream counts,
		 * either the default or the user specified stream counts.
		 */
		if (sinfo) {
			if (!sinit || (sinit && !sinit->sinit_num_ostreams)) {
				/* Check against the defaults. */
				if (sinfo->sinfo_stream >=
				    sp->initmsg.sinit_num_ostreams) {
					err = -EINVAL;
					goto out_unlock;
				}
			} else {
				/* Check against the requested.  */
				if (sinfo->sinfo_stream >=
				    sinit->sinit_num_ostreams) {
					err = -EINVAL;
					goto out_unlock;
				}
			}
		}

		/*
		 * API 3.1.2 bind() - UDP Style Syntax
		 * If a bind() or sctp_bindx() is not called prior to a
		 * sendmsg() call that initiates a new association, the
		 * system picks an ephemeral port and will choose an address
		 * set equivalent to binding with a wildcard address.
		 */
		if (!ep->base.bind_addr.port) {
			if (sctp_autobind(sk)) {
				err = -EAGAIN;
				goto out_unlock;
			}
		} else {
			/*
			 * If an unprivileged user inherits a one-to-many
			 * style socket with open associations on a privileged
			 * port, it MAY be permitted to accept new associations,
			 * but it SHOULD NOT be permitted to open new
			 * associations.
			 */
			if (ep->base.bind_addr.port < PROT_SOCK &&
			    !ns_capable(net->user_ns, CAP_NET_BIND_SERVICE)) {
				err = -EACCES;
				goto out_unlock;
			}
		}

		scope = sctp_scope(&to);
		new_asoc = sctp_association_new(ep, sk, scope, GFP_KERNEL);
		if (!new_asoc) {
			err = -ENOMEM;
			goto out_unlock;
		}
		asoc = new_asoc;
		err = sctp_assoc_set_bind_addr_from_ep(asoc, scope, GFP_KERNEL);
		if (err < 0) {
			err = -ENOMEM;
			goto out_free;
		}

		/* If the SCTP_INIT ancillary data is specified, set all
		 * the association init values accordingly.
		 */
		if (sinit) {
			if (sinit->sinit_num_ostreams) {
				asoc->c.sinit_num_ostreams =
					sinit->sinit_num_ostreams;
			}
			if (sinit->sinit_max_instreams) {
				asoc->c.sinit_max_instreams =
					sinit->sinit_max_instreams;
			}
			if (sinit->sinit_max_attempts) {
				asoc->max_init_attempts
					= sinit->sinit_max_attempts;
			}
			if (sinit->sinit_max_init_timeo) {
				asoc->max_init_timeo =
				 msecs_to_jiffies(sinit->sinit_max_init_timeo);
			}
		}

		/* Prime the peer's transport structures.  */
		transport = sctp_assoc_add_peer(asoc, &to, GFP_KERNEL, SCTP_UNKNOWN);
		if (!transport) {
			err = -ENOMEM;
			goto out_free;
		}
	}

	/* ASSERT: we have a valid association at this point.  */
	pr_debug("%s: we have a valid association\n", __func__);

	if (!sinfo) {
		/* If the user didn't specify SNDRCVINFO, make up one with
		 * some defaults.
		 */
		memset(&default_sinfo, 0, sizeof(default_sinfo));
		default_sinfo.sinfo_stream = asoc->default_stream;
		default_sinfo.sinfo_flags = asoc->default_flags;
		default_sinfo.sinfo_ppid = asoc->default_ppid;
		default_sinfo.sinfo_context = asoc->default_context;
		default_sinfo.sinfo_timetolive = asoc->default_timetolive;
		default_sinfo.sinfo_assoc_id = sctp_assoc2id(asoc);
		sinfo = &default_sinfo;
	}

	/* API 7.1.7, the sndbuf size per association bounds the
	 * maximum size of data that can be sent in a single send call.
	 */
	if (msg_len > sk->sk_sndbuf) {
		err = -EMSGSIZE;
		goto out_free;
	}

	if (asoc->pmtu_pending)
		sctp_assoc_pending_pmtu(sk, asoc);

	/* If fragmentation is disabled and the message length exceeds the
	 * association fragmentation point, return EMSGSIZE.  The I-D
	 * does not specify what this error is, but this looks like
	 * a great fit.
	 */
	if (sctp_sk(sk)->disable_fragments && (msg_len > asoc->frag_point)) {
		err = -EMSGSIZE;
		goto out_free;
	}

	/* Check for invalid stream. */
	if (sinfo->sinfo_stream >= asoc->c.sinit_num_ostreams) {
		err = -EINVAL;
		goto out_free;
	}

	timeo = sock_sndtimeo(sk, msg->msg_flags & MSG_DONTWAIT);
	if (!sctp_wspace(asoc)) {
		err = sctp_wait_for_sndbuf(asoc, &timeo, msg_len);
		if (err)
			goto out_free;
	}

	/* If an address is passed with the sendto/sendmsg call, it is used
	 * to override the primary destination address in the TCP model, or
	 * when SCTP_ADDR_OVER flag is set in the UDP model.
	 */
	if ((sctp_style(sk, TCP) && msg_name) ||
	    (sinfo_flags & SCTP_ADDR_OVER)) {
		chunk_tp = sctp_assoc_lookup_paddr(asoc, &to);
		if (!chunk_tp) {
			err = -EINVAL;
			goto out_free;
		}
	} else
		chunk_tp = NULL;

	/* Auto-connect, if we aren't connected already. */
	if (sctp_state(asoc, CLOSED)) {
		err = sctp_primitive_ASSOCIATE(net, asoc, NULL);
		if (err < 0)
			goto out_free;

		pr_debug("%s: we associated primitively\n", __func__);
	}

	/* Break the message into multiple chunks of maximum size. */
	datamsg = sctp_datamsg_from_user(asoc, sinfo, msg, msg_len);
	if (IS_ERR(datamsg)) {
		err = PTR_ERR(datamsg);
		goto out_free;
	}

	/* Now send the (possibly) fragmented message. */
	list_for_each_entry(chunk, &datamsg->chunks, frag_list) {
		sctp_chunk_hold(chunk);

		/* Do accounting for the write space.  */
		sctp_set_owner_w(chunk);

		chunk->transport = chunk_tp;
	}

	/* Send it to the lower layers.  Note:  all chunks
	 * must either fail or succeed.   The lower layer
	 * works that way today.  Keep it that way or this
	 * breaks.
	 */
	err = sctp_primitive_SEND(net, asoc, datamsg);
	/* Did the lower layer accept the chunk? */
	if (err) {
		sctp_datamsg_free(datamsg);
		goto out_free;
	}

	pr_debug("%s: we sent primitively\n", __func__);

	sctp_datamsg_put(datamsg);
	err = msg_len;

	/* If we are already past ASSOCIATE, the lower
	 * layers are responsible for association cleanup.
	 */
	goto out_unlock;

out_free:
	if (new_asoc) {
		sctp_unhash_established(asoc);
		sctp_association_free(asoc);
	}
out_unlock:
	sctp_release_sock(sk);

out_nounlock:
	return sctp_error(sk, msg_flags, err);

#if 0
do_sock_err:
	if (msg_len)
		err = msg_len;
	else
		err = sock_error(sk);
	goto out;

do_interrupted:
	if (msg_len)
		err = msg_len;
	goto out;
#endif /* 0 */
}

/* This is an extended version of skb_pull() that removes the data from the
 * start of a skb even when data is spread across the list of skb's in the
 * frag_list. len specifies the total amount of data that needs to be removed.
 * when 'len' bytes could be removed from the skb, it returns 0.
 * If 'len' exceeds the total skb length,  it returns the no. of bytes that
 * could not be removed.
 */
static int sctp_skb_pull(struct sk_buff *skb, int len)
{
	struct sk_buff *list;
	int skb_len = skb_headlen(skb);
	int rlen;

	if (len <= skb_len) {
		__skb_pull(skb, len);
		return 0;
	}
	len -= skb_len;
	__skb_pull(skb, skb_len);

	skb_walk_frags(skb, list) {
		rlen = sctp_skb_pull(list, len);
		skb->len -= (len-rlen);
		skb->data_len -= (len-rlen);

		if (!rlen)
			return 0;

		len = rlen;
	}