socket.c

 *   spp_hbinterval  - This contains the value of the heartbeat interval,
 *                     in milliseconds.  If a  value of zero
 *                     is present in this field then no changes are to
 *                     be made to this parameter.
 *   spp_pathmaxrxt  - This contains the maximum number of
 *                     retransmissions before this address shall be
 *                     considered unreachable. If a  value of zero
 *                     is present in this field then no changes are to
 *                     be made to this parameter.
 *   spp_pathmtu     - When Path MTU discovery is disabled the value
 *                     specified here will be the "fixed" path mtu.
 *                     Note that if the spp_address field is empty
 *                     then all associations on this address will
 *                     have this fixed path mtu set upon them.
 *
 *   spp_sackdelay   - When delayed sack is enabled, this value specifies
 *                     the number of milliseconds that sacks will be delayed
 *                     for. This value will apply to all addresses of an
 *                     association if the spp_address field is empty. Note
 *                     also, that if delayed sack is enabled and this
 *                     value is set to 0, no change is made to the last
 *                     recorded delayed sack timer value.
 *
 *   spp_flags       - These flags are used to control various features
 *                     on an association. The flag field may contain
 *                     zero or more of the following options.
 *
 *                     SPP_HB_ENABLE  - Enable heartbeats on the
 *                     specified address. Note that if the address
 *                     field is empty all addresses for the association
 *                     have heartbeats enabled upon them.
 *
 *                     SPP_HB_DISABLE - Disable heartbeats on the
 *                     speicifed address. Note that if the address
 *                     field is empty all addresses for the association
 *                     will have their heartbeats disabled. Note also
 *                     that SPP_HB_ENABLE and SPP_HB_DISABLE are
 *                     mutually exclusive, only one of these two should
 *                     be specified. Enabling both fields will have
 *                     undetermined results.
 *
 *                     SPP_HB_DEMAND - Request a user initiated heartbeat
 *                     to be made immediately.
 *
 *                     SPP_PMTUD_ENABLE - This field will enable PMTU
 *                     discovery upon the specified address. Note that
 *                     if the address feild is empty then all addresses
 *                     on the association are effected.
 *
 *                     SPP_PMTUD_DISABLE - This field will disable PMTU
 *                     discovery upon the specified address. Note that
 *                     if the address feild is empty then all addresses
 *                     on the association are effected. Not also that
 *                     SPP_PMTUD_ENABLE and SPP_PMTUD_DISABLE are mutually
 *                     exclusive. Enabling both will have undetermined
 *                     results.
 *
 *                     SPP_SACKDELAY_ENABLE - Setting this flag turns
 *                     on delayed sack. The time specified in spp_sackdelay
 *                     is used to specify the sack delay for this address. Note
 *                     that if spp_address is empty then all addresses will
 *                     enable delayed sack and take on the sack delay
 *                     value specified in spp_sackdelay.
 *                     SPP_SACKDELAY_DISABLE - Setting this flag turns
 *                     off delayed sack. If the spp_address field is blank then
 *                     delayed sack is disabled for the entire association. Note
 *                     also that this field is mutually exclusive to
 *                     SPP_SACKDELAY_ENABLE, setting both will have undefined
 *                     results.
 */
static int sctp_apply_peer_addr_params(struct sctp_paddrparams *params,
				       struct sctp_transport   *trans,
				       struct sctp_association *asoc,
				       struct sctp_sock        *sp,
				       int                      hb_change,
				       int                      pmtud_change,
				       int                      sackdelay_change)
{
	int error;

	if (params->spp_flags & SPP_HB_DEMAND && trans) {
		error = sctp_primitive_REQUESTHEARTBEAT (trans->asoc, trans);
		if (error)
			return error;
	}

	if (params->spp_hbinterval) {
		if (trans) {
			trans->hbinterval = msecs_to_jiffies(params->spp_hbinterval);
		} else if (asoc) {
			asoc->hbinterval = msecs_to_jiffies(params->spp_hbinterval);
		} else {
			sp->hbinterval = params->spp_hbinterval;
		}
	}

	if (hb_change) {
		if (trans) {
			trans->param_flags =
				(trans->param_flags & ~SPP_HB) | hb_change;
		} else if (asoc) {
			asoc->param_flags =
				(asoc->param_flags & ~SPP_HB) | hb_change;
		} else {
			sp->param_flags =
				(sp->param_flags & ~SPP_HB) | hb_change;
		}
	}

	if (params->spp_pathmtu) {
		if (trans) {
			trans->pathmtu = params->spp_pathmtu;
			sctp_assoc_sync_pmtu(asoc);
		} else if (asoc) {
			asoc->pathmtu = params->spp_pathmtu;
			sctp_frag_point(sp, params->spp_pathmtu);
		} else {
			sp->pathmtu = params->spp_pathmtu;
		}
	}

	if (pmtud_change) {
		if (trans) {
			int update = (trans->param_flags & SPP_PMTUD_DISABLE) &&
				(params->spp_flags & SPP_PMTUD_ENABLE);
			trans->param_flags =
				(trans->param_flags & ~SPP_PMTUD) | pmtud_change;
			if (update) {
				sctp_transport_pmtu(trans);
				sctp_assoc_sync_pmtu(asoc);
			}
		} else if (asoc) {
			asoc->param_flags =
				(asoc->param_flags & ~SPP_PMTUD) | pmtud_change;
		} else {
			sp->param_flags =
				(sp->param_flags & ~SPP_PMTUD) | pmtud_change;
		}
	}

	if (params->spp_sackdelay) {
		if (trans) {
			trans->sackdelay =
				msecs_to_jiffies(params->spp_sackdelay);
		} else if (asoc) {
			asoc->sackdelay =
				msecs_to_jiffies(params->spp_sackdelay);
		} else {
			sp->sackdelay = params->spp_sackdelay;
		}
	}

	if (sackdelay_change) {
		if (trans) {
			trans->param_flags =
				(trans->param_flags & ~SPP_SACKDELAY) |
				sackdelay_change;
		} else if (asoc) {
			asoc->param_flags =
				(asoc->param_flags & ~SPP_SACKDELAY) |
				sackdelay_change;
		} else {
			sp->param_flags =
				(sp->param_flags & ~SPP_SACKDELAY) |
				sackdelay_change;
		}
	}

	if (params->spp_pathmaxrxt) {
		if (trans) {
			trans->pathmaxrxt = params->spp_pathmaxrxt;
		} else if (asoc) {
			asoc->pathmaxrxt = params->spp_pathmaxrxt;
		} else {
			sp->pathmaxrxt = params->spp_pathmaxrxt;
		}
	}

	return 0;
}

static int sctp_setsockopt_peer_addr_params(struct sock *sk,
					    char __user *optval, int optlen)
{
	struct sctp_paddrparams  params;
	struct sctp_transport   *trans = NULL;
	struct sctp_association *asoc = NULL;
	struct sctp_sock        *sp = sctp_sk(sk);
	int error;
	int hb_change, pmtud_change, sackdelay_change;

	if (optlen != sizeof(struct sctp_paddrparams))
		return - EINVAL;

	if (copy_from_user(&params, optval, optlen))
		return -EFAULT;

	/* Validate flags and value parameters. */
	hb_change        = params.spp_flags & SPP_HB;
	pmtud_change     = params.spp_flags & SPP_PMTUD;
	sackdelay_change = params.spp_flags & SPP_SACKDELAY;

	if (hb_change        == SPP_HB ||
	    pmtud_change     == SPP_PMTUD ||
	    sackdelay_change == SPP_SACKDELAY ||
	    params.spp_sackdelay > 500 ||
	    (params.spp_pathmtu
	    && params.spp_pathmtu < SCTP_DEFAULT_MINSEGMENT))
		return -EINVAL;

	/* If an address other than INADDR_ANY is specified, and
	 * no transport is found, then the request is invalid.
	 */
	if (!sctp_is_any(( union sctp_addr *)&params.spp_address)) {
		trans = sctp_addr_id2transport(sk, &params.spp_address,
					       params.spp_assoc_id);
		if (!trans)
			return -EINVAL;
	}

	/* Get association, if assoc_id != 0 and the socket is a one
	 * to many style socket, and an association was not found, then
	 * the id was invalid.
	 */
	asoc = sctp_id2assoc(sk, params.spp_assoc_id);
	if (!asoc && params.spp_assoc_id && sctp_style(sk, UDP))
		return -EINVAL;

	/* Heartbeat demand can only be sent on a transport or
	 * association, but not a socket.
	 */
	if (params.spp_flags & SPP_HB_DEMAND && !trans && !asoc)
		return -EINVAL;

	/* Process parameters. */
	error = sctp_apply_peer_addr_params(&params, trans, asoc, sp,
					    hb_change, pmtud_change,
					    sackdelay_change);

	if (error)
		return error;

	/* If changes are for association, also apply parameters to each
	 * transport.
	 */
	if (!trans && asoc) {
		struct list_head *pos;

		list_for_each(pos, &asoc->peer.transport_addr_list) {
			trans = list_entry(pos, struct sctp_transport,
					   transports);
			sctp_apply_peer_addr_params(&params, trans, asoc, sp,
						    hb_change, pmtud_change,
						    sackdelay_change);
		}
	}

	return 0;
}

/* 7.1.24. Delayed Ack Timer (SCTP_DELAYED_ACK_TIME)
 *
 *   This options will get or set the delayed ack timer.  The time is set
 *   in milliseconds.  If the assoc_id is 0, then this sets or gets the
 *   endpoints default delayed ack timer value.  If the assoc_id field is
 *   non-zero, then the set or get effects the specified association.
 *
 *   struct sctp_assoc_value {
 *       sctp_assoc_t            assoc_id;
 *       uint32_t                assoc_value;
 *   };
 *
 *     assoc_id    - This parameter, indicates which association the
 *                   user is preforming an action upon. Note that if
 *                   this field's value is zero then the endpoints
 *                   default value is changed (effecting future
 *                   associations only).
 *
 *     assoc_value - This parameter contains the number of milliseconds
 *                   that the user is requesting the delayed ACK timer
 *                   be set to. Note that this value is defined in
 *                   the standard to be between 200 and 500 milliseconds.
 *
 *                   Note: a value of zero will leave the value alone,
 *                   but disable SACK delay. A non-zero value will also
 *                   enable SACK delay.
 */

static int sctp_setsockopt_delayed_ack_time(struct sock *sk,
					    char __user *optval, int optlen)
{
	struct sctp_assoc_value  params;
	struct sctp_transport   *trans = NULL;
	struct sctp_association *asoc = NULL;
	struct sctp_sock        *sp = sctp_sk(sk);

	if (optlen != sizeof(struct sctp_assoc_value))
		return - EINVAL;

	if (copy_from_user(&params, optval, optlen))
		return -EFAULT;

	/* Validate value parameter. */
	if (params.assoc_value > 500)
		return -EINVAL;

	/* Get association, if assoc_id != 0 and the socket is a one
	 * to many style socket, and an association was not found, then
	 * the id was invalid.
 	 */
	asoc = sctp_id2assoc(sk, params.assoc_id);
	if (!asoc && params.assoc_id && sctp_style(sk, UDP))
		return -EINVAL;

	if (params.assoc_value) {
		if (asoc) {
			asoc->sackdelay =
				msecs_to_jiffies(params.assoc_value);
			asoc->param_flags = 
				(asoc->param_flags & ~SPP_SACKDELAY) |
				SPP_SACKDELAY_ENABLE;
		} else {
			sp->sackdelay = params.assoc_value;
			sp->param_flags = 
				(sp->param_flags & ~SPP_SACKDELAY) |
				SPP_SACKDELAY_ENABLE;
		}
	} else {
		if (asoc) {
			asoc->param_flags = 
				(asoc->param_flags & ~SPP_SACKDELAY) |
				SPP_SACKDELAY_DISABLE;
		} else {
			sp->param_flags = 
				(sp->param_flags & ~SPP_SACKDELAY) |
				SPP_SACKDELAY_DISABLE;
		}
	}

	/* If change is for association, also apply to each transport. */
	if (asoc) {
		struct list_head *pos;

		list_for_each(pos, &asoc->peer.transport_addr_list) {
			trans = list_entry(pos, struct sctp_transport,
					   transports);
			if (params.assoc_value) {
				trans->sackdelay =
					msecs_to_jiffies(params.assoc_value);
				trans->param_flags = 
					(trans->param_flags & ~SPP_SACKDELAY) |
					SPP_SACKDELAY_ENABLE;
			} else {
				trans->param_flags = 
					(trans->param_flags & ~SPP_SACKDELAY) |
					SPP_SACKDELAY_DISABLE;
			}
		}
	}
 
	return 0;
}

/* 7.1.3 Initialization Parameters (SCTP_INITMSG)
 *
 * Applications can specify protocol parameters for the default association
 * initialization.  The option name argument to setsockopt() and getsockopt()
 * is SCTP_INITMSG.
 *
 * Setting initialization parameters is effective only on an unconnected
 * socket (for UDP-style sockets only future associations are effected
 * by the change).  With TCP-style sockets, this option is inherited by
 * sockets derived from a listener socket.
 */
static int sctp_setsockopt_initmsg(struct sock *sk, char __user *optval, int optlen)
{
	struct sctp_initmsg sinit;
	struct sctp_sock *sp = sctp_sk(sk);

	if (optlen != sizeof(struct sctp_initmsg))
		return -EINVAL;
	if (copy_from_user(&sinit, optval, optlen))
		return -EFAULT;

	if (sinit.sinit_num_ostreams)
		sp->initmsg.sinit_num_ostreams = sinit.sinit_num_ostreams;	
	if (sinit.sinit_max_instreams)
		sp->initmsg.sinit_max_instreams = sinit.sinit_max_instreams;	
	if (sinit.sinit_max_attempts)
		sp->initmsg.sinit_max_attempts = sinit.sinit_max_attempts;	
	if (sinit.sinit_max_init_timeo)
		sp->initmsg.sinit_max_init_timeo = sinit.sinit_max_init_timeo;	

	return 0;
}

/*
 * 7.1.14 Set default send parameters (SCTP_DEFAULT_SEND_PARAM)
 *
 *   Applications that wish to use the sendto() system call may wish to
 *   specify a default set of parameters that would normally be supplied
 *   through the inclusion of ancillary data.  This socket option allows
 *   such an application to set the default sctp_sndrcvinfo structure.
 *   The application that wishes to use this socket option simply passes
 *   in to this call the sctp_sndrcvinfo structure defined in Section
 *   5.2.2) The input parameters accepted by this call include
 *   sinfo_stream, sinfo_flags, sinfo_ppid, sinfo_context,
 *   sinfo_timetolive.  The user must provide the sinfo_assoc_id field in
 *   to this call if the caller is using the UDP model.
 */
static int sctp_setsockopt_default_send_param(struct sock *sk,
						char __user *optval, int optlen)
{
	struct sctp_sndrcvinfo info;
	struct sctp_association *asoc;
	struct sctp_sock *sp = sctp_sk(sk);

	if (optlen != sizeof(struct sctp_sndrcvinfo))
		return -EINVAL;
	if (copy_from_user(&info, optval, optlen))
		return -EFAULT;

	asoc = sctp_id2assoc(sk, info.sinfo_assoc_id);
	if (!asoc && info.sinfo_assoc_id && sctp_style(sk, UDP))
		return -EINVAL;

	if (asoc) {
		asoc->default_stream = info.sinfo_stream;
		asoc->default_flags = info.sinfo_flags;
		asoc->default_ppid = info.sinfo_ppid;
		asoc->default_context = info.sinfo_context;
		asoc->default_timetolive = info.sinfo_timetolive;
	} else {
		sp->default_stream = info.sinfo_stream;
		sp->default_flags = info.sinfo_flags;
		sp->default_ppid = info.sinfo_ppid;
		sp->default_context = info.sinfo_context;
		sp->default_timetolive = info.sinfo_timetolive;
	}

	return 0;
}

/* 7.1.10 Set Primary Address (SCTP_PRIMARY_ADDR)
 *
 * Requests that the local SCTP stack use the enclosed peer address as
 * the association primary.  The enclosed address must be one of the
 * association peer's addresses.
 */
static int sctp_setsockopt_primary_addr(struct sock *sk, char __user *optval,
					int optlen)
{
	struct sctp_prim prim;
	struct sctp_transport *trans;

	if (optlen != sizeof(struct sctp_prim))
		return -EINVAL;

	if (copy_from_user(&prim, optval, sizeof(struct sctp_prim)))
		return -EFAULT;

	trans = sctp_addr_id2transport(sk, &prim.ssp_addr, prim.ssp_assoc_id);
	if (!trans)
		return -EINVAL;

	sctp_assoc_set_primary(trans->asoc, trans);

	return 0;
}

/*
 * 7.1.5 SCTP_NODELAY
 *
 * Turn on/off any Nagle-like algorithm.  This means that packets are
 * generally sent as soon as possible and no unnecessary delays are
 * introduced, at the cost of more packets in the network.  Expects an
 *  integer boolean flag.
 */
static int sctp_setsockopt_nodelay(struct sock *sk, char __user *optval,
					int optlen)
{
	int val;

	if (optlen < sizeof(int))
		return -EINVAL;
	if (get_user(val, (int __user *)optval))
		return -EFAULT;

	sctp_sk(sk)->nodelay = (val == 0) ? 0 : 1;
	return 0;
}

/*
 *
 * 7.1.1 SCTP_RTOINFO
 *
 * The protocol parameters used to initialize and bound retransmission
 * timeout (RTO) are tunable. sctp_rtoinfo structure is used to access
 * and modify these parameters.
 * All parameters are time values, in milliseconds.  A value of 0, when
 * modifying the parameters, indicates that the current value should not
 * be changed.
 *
 */
static int sctp_setsockopt_rtoinfo(struct sock *sk, char __user *optval, int optlen) {
	struct sctp_rtoinfo rtoinfo;
	struct sctp_association *asoc;

	if (optlen != sizeof (struct sctp_rtoinfo))
		return -EINVAL;

	if (copy_from_user(&rtoinfo, optval, optlen))
		return -EFAULT;

	asoc = sctp_id2assoc(sk, rtoinfo.srto_assoc_id);

	/* Set the values to the specific association */
	if (!asoc && rtoinfo.srto_assoc_id && sctp_style(sk, UDP))
		return -EINVAL;

	if (asoc) {
		if (rtoinfo.srto_initial != 0)
			asoc->rto_initial = 
				msecs_to_jiffies(rtoinfo.srto_initial);
		if (rtoinfo.srto_max != 0)
			asoc->rto_max = msecs_to_jiffies(rtoinfo.srto_max);
		if (rtoinfo.srto_min != 0)
			asoc->rto_min = msecs_to_jiffies(rtoinfo.srto_min);
	} else {
		/* If there is no association or the association-id = 0
		 * set the values to the endpoint.
		 */
		struct sctp_sock *sp = sctp_sk(sk);

		if (rtoinfo.srto_initial != 0)
			sp->rtoinfo.srto_initial = rtoinfo.srto_initial;
		if (rtoinfo.srto_max != 0)
			sp->rtoinfo.srto_max = rtoinfo.srto_max;
		if (rtoinfo.srto_min != 0)
			sp->rtoinfo.srto_min = rtoinfo.srto_min;
	}

	return 0;
}

/*
 *
 * 7.1.2 SCTP_ASSOCINFO
 *
 * This option is used to tune the the maximum retransmission attempts
 * of the association.
 * Returns an error if the new association retransmission value is
 * greater than the sum of the retransmission value  of the peer.
 * See [SCTP] for more information.
 *
 */
static int sctp_setsockopt_associnfo(struct sock *sk, char __user *optval, int optlen)
{

	struct sctp_assocparams assocparams;
	struct sctp_association *asoc;

	if (optlen != sizeof(struct sctp_assocparams))
		return -EINVAL;
	if (copy_from_user(&assocparams, optval, optlen))
		return -EFAULT;

	asoc = sctp_id2assoc(sk, assocparams.sasoc_assoc_id);

	if (!asoc && assocparams.sasoc_assoc_id && sctp_style(sk, UDP))
		return -EINVAL;

	/* Set the values to the specific association */
	if (asoc) {
		if (assocparams.sasoc_asocmaxrxt != 0) {
			__u32 path_sum = 0;
			int   paths = 0;
			struct list_head *pos;
			struct sctp_transport *peer_addr;

			list_for_each(pos, &asoc->peer.transport_addr_list) {
				peer_addr = list_entry(pos,
						struct sctp_transport,
						transports);
				path_sum += peer_addr->pathmaxrxt;
				paths++;
			}

			/* Only validate asocmaxrxt if we have more then
			 * one path/transport.  We do this because path
			 * retransmissions are only counted when we have more
			 * then one path.
			 */
			if (paths > 1 &&
			    assocparams.sasoc_asocmaxrxt > path_sum)
				return -EINVAL;

			asoc->max_retrans = assocparams.sasoc_asocmaxrxt;
		}

		if (assocparams.sasoc_cookie_life != 0) {
			asoc->cookie_life.tv_sec =
					assocparams.sasoc_cookie_life / 1000;
			asoc->cookie_life.tv_usec =
					(assocparams.sasoc_cookie_life % 1000)
					* 1000;
		}
	} else {
		/* Set the values to the endpoint */
		struct sctp_sock *sp = sctp_sk(sk);

		if (assocparams.sasoc_asocmaxrxt != 0)
			sp->assocparams.sasoc_asocmaxrxt =
						assocparams.sasoc_asocmaxrxt;
		if (assocparams.sasoc_cookie_life != 0)
			sp->assocparams.sasoc_cookie_life =
						assocparams.sasoc_cookie_life;
	}
	return 0;
}

/*
 * 7.1.16 Set/clear IPv4 mapped addresses (SCTP_I_WANT_MAPPED_V4_ADDR)
 *
 * This socket option is a boolean flag which turns on or off mapped V4
 * addresses.  If this option is turned on and the socket is type
 * PF_INET6, then IPv4 addresses will be mapped to V6 representation.
 * If this option is turned off, then no mapping will be done of V4
 * addresses and a user will receive both PF_INET6 and PF_INET type
 * addresses on the socket.
 */
static int sctp_setsockopt_mappedv4(struct sock *sk, char __user *optval, int optlen)
{
	int val;
	struct sctp_sock *sp = sctp_sk(sk);

	if (optlen < sizeof(int))
		return -EINVAL;
	if (get_user(val, (int __user *)optval))
		return -EFAULT;
	if (val)
		sp->v4mapped = 1;
	else
		sp->v4mapped = 0;

	return 0;
}

/*
 * 7.1.17 Set the maximum fragrmentation size (SCTP_MAXSEG)
 *
 * This socket option specifies the maximum size to put in any outgoing
 * SCTP chunk.  If a message is larger than this size it will be
 * fragmented by SCTP into the specified size.  Note that the underlying
 * SCTP implementation may fragment into smaller sized chunks when the
 * PMTU of the underlying association is smaller than the value set by
 * the user.
 */
static int sctp_setsockopt_maxseg(struct sock *sk, char __user *optval, int optlen)
{
	struct sctp_association *asoc;
	struct list_head *pos;
	struct sctp_sock *sp = sctp_sk(sk);
	int val;

	if (optlen < sizeof(int))
		return -EINVAL;
	if (get_user(val, (int __user *)optval))
		return -EFAULT;
	if ((val != 0) && ((val < 8) || (val > SCTP_MAX_CHUNK_LEN)))
		return -EINVAL;
	sp->user_frag = val;

	/* Update the frag_point of the existing associations. */
	list_for_each(pos, &(sp->ep->asocs)) {
		asoc = list_entry(pos, struct sctp_association, asocs);
		asoc->frag_point = sctp_frag_point(sp, asoc->pathmtu); 
	}

	return 0;
}


/*
 *  7.1.9 Set Peer Primary Address (SCTP_SET_PEER_PRIMARY_ADDR)
 *
 *   Requests that the peer mark the enclosed address as the association
 *   primary. The enclosed address must be one of the association's
 *   locally bound addresses. The following structure is used to make a
 *   set primary request:
 */
static int sctp_setsockopt_peer_primary_addr(struct sock *sk, char __user *optval,
					     int optlen)
{
	struct sctp_sock	*sp;
	struct sctp_endpoint	*ep;
	struct sctp_association	*asoc = NULL;
	struct sctp_setpeerprim	prim;
	struct sctp_chunk	*chunk;
	int 			err;

	sp = sctp_sk(sk);
	ep = sp->ep;

	if (!sctp_addip_enable)
		return -EPERM;

	if (optlen != sizeof(struct sctp_setpeerprim))
		return -EINVAL;

	if (copy_from_user(&prim, optval, optlen))
		return -EFAULT;

	asoc = sctp_id2assoc(sk, prim.sspp_assoc_id);
	if (!asoc) 
		return -EINVAL;

	if (!asoc->peer.asconf_capable)
		return -EPERM;

	if (asoc->peer.addip_disabled_mask & SCTP_PARAM_SET_PRIMARY)
		return -EPERM;

	if (!sctp_state(asoc, ESTABLISHED))
		return -ENOTCONN;

	if (!sctp_assoc_lookup_laddr(asoc, (union sctp_addr *)&prim.sspp_addr))
		return -EADDRNOTAVAIL;

	/* Create an ASCONF chunk with SET_PRIMARY parameter	*/
	chunk = sctp_make_asconf_set_prim(asoc,
					  (union sctp_addr *)&prim.sspp_addr);
	if (!chunk)
		return -ENOMEM;

	err = sctp_send_asconf(asoc, chunk);

	SCTP_DEBUG_PRINTK("We set peer primary addr primitively.\n");

	return err;
}

static int sctp_setsockopt_adaption_layer(struct sock *sk, char __user *optval,
					  int optlen)
{
	struct sctp_setadaption adaption;

	if (optlen != sizeof(struct sctp_setadaption))
		return -EINVAL;
	if (copy_from_user(&adaption, optval, optlen)) 
		return -EFAULT;

	sctp_sk(sk)->adaption_ind = adaption.ssb_adaption_ind;

	return 0;
}

/* API 6.2 setsockopt(), getsockopt()
 *
 * Applications use setsockopt() and getsockopt() to set or retrieve
 * socket options.  Socket options are used to change the default
 * behavior of sockets calls.  They are described in Section 7.
 *
 * The syntax is:
 *
 *   ret = getsockopt(int sd, int level, int optname, void __user *optval,
 *                    int __user *optlen);
 *   ret = setsockopt(int sd, int level, int optname, const void __user *optval,
 *                    int optlen);
 *
 *   sd      - the socket descript.
 *   level   - set to IPPROTO_SCTP for all SCTP options.
 *   optname - the option name.
 *   optval  - the buffer to store the value of the option.
 *   optlen  - the size of the buffer.
 */
SCTP_STATIC int sctp_setsockopt(struct sock *sk, int level, int optname,
				char __user *optval, int optlen)
{
	int retval = 0;

	SCTP_DEBUG_PRINTK("sctp_setsockopt(sk: %p... optname: %d)\n",
			  sk, optname);

	/* I can hardly begin to describe how wrong this is.  This is
	 * so broken as to be worse than useless.  The API draft
	 * REALLY is NOT helpful here...  I am not convinced that the
	 * semantics of setsockopt() with a level OTHER THAN SOL_SCTP
	 * are at all well-founded.
	 */
	if (level != SOL_SCTP) {
		struct sctp_af *af = sctp_sk(sk)->pf->af;
		retval = af->setsockopt(sk, level, optname, optval, optlen);
		goto out_nounlock;
	}

	sctp_lock_sock(sk);

	switch (optname) {
	case SCTP_SOCKOPT_BINDX_ADD:
		/* 'optlen' is the size of the addresses buffer. */
		retval = sctp_setsockopt_bindx(sk, (struct sockaddr __user *)optval,
					       optlen, SCTP_BINDX_ADD_ADDR);
		break;

	case SCTP_SOCKOPT_BINDX_REM:
		/* 'optlen' is the size of the addresses buffer. */
		retval = sctp_setsockopt_bindx(sk, (struct sockaddr __user *)optval,
					       optlen, SCTP_BINDX_REM_ADDR);
		break;

	case SCTP_SOCKOPT_CONNECTX:
		/* 'optlen' is the size of the addresses buffer. */
		retval = sctp_setsockopt_connectx(sk, (struct sockaddr __user *)optval,
					       optlen);
		break;

	case SCTP_DISABLE_FRAGMENTS:
		retval = sctp_setsockopt_disable_fragments(sk, optval, optlen);
		break;

	case SCTP_EVENTS:
		retval = sctp_setsockopt_events(sk, optval, optlen);
		break;

	case SCTP_AUTOCLOSE:
		retval = sctp_setsockopt_autoclose(sk, optval, optlen);
		break;

	case SCTP_PEER_ADDR_PARAMS:
		retval = sctp_setsockopt_peer_addr_params(sk, optval, optlen);
		break;

	case SCTP_DELAYED_ACK_TIME:
		retval = sctp_setsockopt_delayed_ack_time(sk, optval, optlen);
		break;

	case SCTP_INITMSG:
		retval = sctp_setsockopt_initmsg(sk, optval, optlen);
		break;
	case SCTP_DEFAULT_SEND_PARAM:
		retval = sctp_setsockopt_default_send_param(sk, optval,
							    optlen);
		break;
	case SCTP_PRIMARY_ADDR:
		retval = sctp_setsockopt_primary_addr(sk, optval, optlen);
		break;
	case SCTP_SET_PEER_PRIMARY_ADDR:
		retval = sctp_setsockopt_peer_primary_addr(sk, optval, optlen);
		break;
	case SCTP_NODELAY:
		retval = sctp_setsockopt_nodelay(sk, optval, optlen);
		break;
	case SCTP_RTOINFO:
		retval = sctp_setsockopt_rtoinfo(sk, optval, optlen);
		break;
	case SCTP_ASSOCINFO:
		retval = sctp_setsockopt_associnfo(sk, optval, optlen);
		break;
	case SCTP_I_WANT_MAPPED_V4_ADDR:
		retval = sctp_setsockopt_mappedv4(sk, optval, optlen);
		break;
	case SCTP_MAXSEG:
		retval = sctp_setsockopt_maxseg(sk, optval, optlen);
		break;
	case SCTP_ADAPTION_LAYER:
		retval = sctp_setsockopt_adaption_layer(sk, optval, optlen);
		break;

	default:
		retval = -ENOPROTOOPT;
		break;
	};

	sctp_release_sock(sk);

out_nounlock:
	return retval;
}

/* API 3.1.6 connect() - UDP Style Syntax
 *
 * An application may use the connect() call in the UDP model to initiate an
 * association without sending data.
 *
 * The syntax is:
 *
 * ret = connect(int sd, const struct sockaddr *nam, socklen_t len);
 *
 * sd: the socket descriptor to have a new association added to.
 *
 * nam: the address structure (either struct sockaddr_in or struct
 *    sockaddr_in6 defined in RFC2553 [7]).
 *
 * len: the size of the address.
 */
SCTP_STATIC int sctp_connect(struct sock *sk, struct sockaddr *addr,
			     int addr_len)
{
	int err = 0;
	struct sctp_af *af;

	sctp_lock_sock(sk);

	SCTP_DEBUG_PRINTK("%s - sk: %p, sockaddr: %p, addr_len: %d\n",
			  __FUNCTION__, sk, addr, addr_len);

	/* Validate addr_len before calling common connect/connectx routine. */
	af = sctp_get_af_specific(addr->sa_family);
	if (!af || addr_len < af->sockaddr_len) {
		err = -EINVAL;
	} else {
		/* Pass correct addr len to common routine (so it knows there
		 * is only one address being passed.
		 */
		err = __sctp_connect(sk, addr, af->sockaddr_len);
	}

	sctp_release_sock(sk);
	return err;
}

/* FIXME: Write comments. */
SCTP_STATIC int sctp_disconnect(struct sock *sk, int flags)
{
	return -EOPNOTSUPP; /* STUB */
}

/* 4.1.4 accept() - TCP Style Syntax
 *
 * Applications use accept() call to remove an established SCTP
 * association from the accept queue of the endpoint.  A new socket
 * descriptor will be returned from accept() to represent the newly
 * formed association.
 */
SCTP_STATIC struct sock *sctp_accept(struct sock *sk, int flags, int *err)
{
	struct sctp_sock *sp;
	struct sctp_endpoint *ep;
	struct sock *newsk = NULL;
	struct sctp_association *asoc;
	long timeo;
	int error = 0;

	sctp_lock_sock(sk);

	sp = sctp_sk(sk);
	ep = sp->ep;

	if (!sctp_style(sk, TCP)) {
		error = -EOPNOTSUPP;
		goto out;
	}

	if (!sctp_sstate(sk, LISTENING)) {
		error = -EINVAL;
		goto out;
	}

	timeo = sock_rcvtimeo(sk, flags & O_NONBLOCK);

	error = sctp_wait_for_accept(sk, timeo);
	if (error)
		goto out;

	/* We treat the list of associations on the endpoint as the accept
	 * queue and pick the first association on the list.
	 */
	asoc = list_entry(ep->asocs.next, struct sctp_association, asocs);

	newsk = sp->pf->create_accept_sk(sk, asoc);
	if (!newsk) {
		error = -ENOMEM;
		goto out;
	}

	/* Populate the fields of the newsk from the oldsk and migrate the
	 * asoc to the newsk.
	 */
	sctp_sock_migrate(sk, newsk, asoc, SCTP_SOCKET_TCP);

out:
	sctp_release_sock(sk);
 	*err = error;
	return newsk;
}

/* The SCTP ioctl handler. */
SCTP_STATIC int sctp_ioctl(struct sock *sk, int cmd, unsigned long arg)
{
	return -ENOIOCTLCMD;
}

/* This is the function which gets called during socket creation to
 * initialized the SCTP-specific portion of the sock.
 * The sock structure should already be zero-filled memory.
 */
SCTP_STATIC int sctp_init_sock(struct sock *sk)
{
	struct sctp_endpoint *ep;