ARM: pci: make pcibios_assign_all_busses use pci_has_flag

Convert pcibios_assign_all_busses from a define to inline so platforms can
control this setting.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/include/asm/pci.h

@@ -3,10 +3,16 @@
 
 #ifdef __KERNEL__
 #include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci-bridge.h>
 
 #include <asm/mach/pci.h> /* for pci_sys_data */
 #include <mach/hardware.h> /* for PCIBIOS_MIN_* */
 
+static inline int pcibios_assign_all_busses(void)
+{
+	return pci_has_flag(PCI_REASSIGN_ALL_RSRC);
+}
+
 #ifdef CONFIG_PCI_DOMAINS
 static inline int pci_domain_nr(struct pci_bus *bus)
 {

arch/arm/mach-bcmring/include/mach/hardware.h

@@ -36,8 +36,6 @@
 #define RAM_SIZE                (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
 #define RAM_BASE                PAGE_OFFSET
 
-#define pcibios_assign_all_busses()	1
-
 /* Macros to make managing spinlocks a bit more controlled in terms of naming. */
 /* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
 #if defined(__KERNEL__)

arch/arm/mach-cns3xxx/include/mach/hardware.h

@@ -17,6 +17,5 @@
 /* macro to get at IO space when running virtually */
 #define PCIBIOS_MIN_IO		0x00000000
 #define PCIBIOS_MIN_MEM		0x00000000
-#define pcibios_assign_all_busses()	1
 
 #endif

arch/arm/mach-dove/include/mach/hardware.h

@@ -11,8 +11,6 @@
 
 #include "dove.h"
 
-#define pcibios_assign_all_busses()	1
-
 #define PCIBIOS_MIN_IO			0x1000
 #define PCIBIOS_MIN_MEM			0x01000000
 #define PCIMEM_BASE			DOVE_PCIE0_MEM_PHYS_BASE

arch/arm/mach-ep93xx/include/mach/hardware.h

@@ -8,8 +8,6 @@
 #include <mach/ep93xx-regs.h>
 #include <mach/platform.h>
 
-#define pcibios_assign_all_busses()	0
-
 /*
  * The EP93xx has two external crystal oscillators.  To generate the
  * required high-frequency clocks, the processor uses two phase-locked-

arch/arm/mach-footbridge/include/mach/hardware.h

@@ -100,8 +100,6 @@ extern unsigned int nw_gpio_read(void);
 extern void nw_cpld_modify(unsigned int mask, unsigned int set);
 #endif
 
-#define pcibios_assign_all_busses()	1
-
 #define PCIBIOS_MIN_IO		0x1000
 #define PCIBIOS_MIN_MEM 	0x81000000
 

arch/arm/mach-integrator/include/mach/hardware.h

@@ -34,8 +34,6 @@
 
 #define PCIMEM_BASE		PCI_MEMORY_VADDR
 
-#define pcibios_assign_all_busses()	1
-
 #define PCIBIOS_MIN_IO		0x6000
 #define PCIBIOS_MIN_MEM 	0x00100000
 

arch/arm/mach-iop13xx/include/mach/hardware.h

@@ -2,8 +2,6 @@
 #define __ASM_ARCH_HARDWARE_H
 #include <asm/types.h>
 
-#define pcibios_assign_all_busses() 1
-
 #ifndef __ASSEMBLY__
 extern unsigned long iop13xx_pcibios_min_io;
 extern unsigned long iop13xx_pcibios_min_mem;

arch/arm/mach-iop32x/include/mach/hardware.h

@@ -18,7 +18,6 @@
  * but when we read them, we convert them to virtual addresses. See
  * arch/arm/plat-iop/pci.c.
  */
-#define pcibios_assign_all_busses() 1
 #define PCIBIOS_MIN_IO		0x00000000
 #define PCIBIOS_MIN_MEM		0x00000000
 

arch/arm/mach-iop33x/include/mach/hardware.h

@@ -18,7 +18,6 @@
  * but when we read them, we convert them to virtual addresses.  See
  * arch/arm/mach-iop3xx/iop3xx-pci.c
  */
-#define pcibios_assign_all_busses()	1
 #define PCIBIOS_MIN_IO		0x00000000
 #define PCIBIOS_MIN_MEM		0x00000000
 

arch/arm/mach-ixp2000/include/mach/hardware.h

@@ -27,8 +27,6 @@
 
 #include "ixp2000-regs.h"	/* Chipset Registers */
 
-#define pcibios_assign_all_busses() 0
-
 /*
  * Platform helper functions
  */

arch/arm/mach-ixp2000/pci.c

@@ -196,6 +196,8 @@ clear_master_aborts(void)
 void __init
 ixp2000_pci_preinit(void)
 {
+	pci_set_flags(0);
+
 #ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
 	/*
 	 * Configure the PCI unit to properly byteswap I/O transactions,

arch/arm/mach-ixp23xx/include/mach/hardware.h

@@ -20,8 +20,6 @@
 
 #include "ixp23xx.h"
 
-#define pcibios_assign_all_busses()	0
-
 /*
  * Platform helper functions
  */

arch/arm/mach-ixp23xx/pci.c

@@ -227,6 +227,8 @@ static void __init ixp23xx_pci_common_init(void)
 
 void __init ixp23xx_pci_preinit(void)
 {
+	pci_set_flags(0);
+
 	ixp23xx_pci_common_init();
 
 	hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0,

arch/arm/mach-ixp4xx/include/mach/hardware.h

@@ -28,8 +28,6 @@
 
 #define ARCH_HAS_DMA_SET_COHERENT_MASK
 
-#define pcibios_assign_all_busses()	1
-
 /* Register locations and bits */
 #include "ixp4xx-regs.h"
 

arch/arm/mach-kirkwood/include/mach/hardware.h

@@ -11,9 +11,6 @@
 
 #include "kirkwood.h"
 
-#define pcibios_assign_all_busses()	1
-
-#define PCIBIOS_MIN_IO			0x00001000
 #define PCIBIOS_MIN_MEM			0x01000000
 #define PCIMEM_BASE			KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
 

arch/arm/mach-ks8695/include/mach/hardware.h

@@ -46,8 +46,6 @@
 /*
  * PCI support
  */
-#define pcibios_assign_all_busses()	1
-
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
 

arch/arm/mach-mv78xx0/include/mach/hardware.h

@@ -11,8 +11,6 @@
 
 #include "mv78xx0.h"
 
-#define pcibios_assign_all_busses()	1
-
 #define PCIBIOS_MIN_IO			0x00001000
 #define PCIBIOS_MIN_MEM			0x01000000
 #define PCIMEM_BASE			MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */

arch/arm/mach-orion5x/include/mach/hardware.h

@@ -11,8 +11,6 @@
 
 #include "orion5x.h"
 
-#define pcibios_assign_all_busses()	1
-
 #define PCIBIOS_MIN_IO		0x00001000
 #define PCIBIOS_MIN_MEM		0x01000000
 #define PCIMEM_BASE		ORION5X_PCIE_MEM_PHYS_BASE

arch/arm/mach-pxa/include/mach/hardware.h

@@ -339,7 +339,6 @@ extern unsigned long get_clock_tick_rate(void);
 #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
-#define pcibios_assign_all_busses()	1
 #define ARCH_HAS_DMA_SET_COHERENT_MASK
 #endif