Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

John W. Linville says:

====================
Please pull these last(?) few wireless bits intended for the 3.14
stream.  Each is here to address a problem found with a patch already
merged...

Dave Jones gives us a memory leak fix, for an error path in brcmfmac.

Felix Fietkau moves a small delay to make it actually reachable.

Helmut Schaa fixes an ath9k sequence numbering problem for non-data
frames.

Stanislaw Gruszka reverts an earlier fix that was found to cause
random connection drops on RT5390 PCI adapters
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/wireless/ath/ath9k/hw.c

@@ -1548,6 +1548,7 @@ bool ath9k_hw_check_alive(struct ath_hw *ah)
 		if (reg != last_val)
 			return true;
 
+		udelay(1);
 		last_val = reg;
 		if ((reg & 0x7E7FFFEF) == 0x00702400)
 			continue;
@@ -1560,8 +1561,6 @@ bool ath9k_hw_check_alive(struct ath_hw *ah)
 		default:
 			return true;
 		}
-
-		udelay(1);
 	} while (count-- > 0);
 
 	return false;

drivers/net/wireless/ath/ath9k/xmit.c

@@ -2063,7 +2063,7 @@ static struct ath_buf *ath_tx_setup_buffer(struct ath_softc *sc,
 
 	ATH_TXBUF_RESET(bf);
 
-	if (tid) {
+	if (tid && ieee80211_is_data_present(hdr->frame_control)) {
 		fragno = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
 		seqno = tid->seq_next;
 		hdr->seq_ctrl = cpu_to_le16(tid->seq_next << IEEE80211_SEQ_SEQ_SHIFT);
@@ -2186,7 +2186,7 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
 		txq->stopped = true;
 	}
 
-	if (txctl->an)
+	if (txctl->an && ieee80211_is_data_present(hdr->frame_control))
 		tid = ath_get_skb_tid(sc, txctl->an, skb);
 
 	if (info->flags & IEEE80211_TX_CTL_PS_RESPONSE) {

drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c

@@ -1948,8 +1948,10 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus,
 		if (pkt_pad == NULL)
 			return -ENOMEM;
 		ret = brcmf_sdio_txpkt_hdalign(bus, pkt_pad);
-		if (unlikely(ret < 0))
+		if (unlikely(ret < 0)) {
+			kfree_skb(pkt_pad);
 			return ret;
+		}
 		memcpy(pkt_pad->data,
 		       pkt->data + pkt->len - tail_chop,
 		       tail_chop);

drivers/net/wireless/rt2x00/rt2800lib.c

@@ -5460,14 +5460,15 @@ static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
 
 	rt2800_bbp_write(rt2x00dev, 68, 0x0b);
 
-	rt2800_bbp_write(rt2x00dev, 69, 0x0d);
-	rt2800_bbp_write(rt2x00dev, 70, 0x06);
+	rt2800_bbp_write(rt2x00dev, 69, 0x12);
 	rt2800_bbp_write(rt2x00dev, 73, 0x13);
 	rt2800_bbp_write(rt2x00dev, 75, 0x46);
 	rt2800_bbp_write(rt2x00dev, 76, 0x28);
 
 	rt2800_bbp_write(rt2x00dev, 77, 0x59);
 
+	rt2800_bbp_write(rt2x00dev, 70, 0x0a);
+
 	rt2800_bbp_write(rt2x00dev, 79, 0x13);
 	rt2800_bbp_write(rt2x00dev, 80, 0x05);
 	rt2800_bbp_write(rt2x00dev, 81, 0x33);
@@ -5510,7 +5511,6 @@ static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev)
 	if (rt2x00_rt(rt2x00dev, RT5392)) {
 		rt2800_bbp_write(rt2x00dev, 134, 0xd0);
 		rt2800_bbp_write(rt2x00dev, 135, 0xf6);
-		rt2800_bbp_write(rt2x00dev, 148, 0x84);
 	}
 
 	rt2800_disable_unused_dac_adc(rt2x00dev);