PCI: Fix whitespace, capitalization, and spelling errors

Fix whitespace, capitalization, and spelling errors. No functional change. I know "busses" is not an error, but "buses" was more common, so I used it consistently. Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus()) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

PCI: Fix whitespace, capitalization, and spelling errors
Fix whitespace, capitalization, and spelling errors. No functional change. I know "busses" is not an error, but "buses" was more common, so I used it consistently. Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus()) Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
f7625980 · Bjorn Helgaas · 4fbf888a · f7625980 · f7625980 · f7625980
Commit f7625980 authored 11 years ago by Bjorn Helgaas
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -410,7 +410,7 @@ EXPORT_SYMBOL_GPL(pci_disable_pasid);
 * Otherwise is returns a bitmask with supported features. Current
 * features reported are:
 * PCI_PASID_CAP_EXEC - Execute permission supported
- * PCI_PASID_CAP_PRIV - Priviledged mode supported
+ * PCI_PASID_CAP_PRIV - Privileged mode supported
 */
 int pci_pasid_features(struct pci_dev *pdev)
 {

--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -249,7 +249,7 @@ struct tegra_pcie {
 	void __iomem *afi;
 	int irq;
-	struct list_head busses;
+	struct list_head buses;
 	struct resource *cs;
 	struct resource io;
@@ -399,14 +399,14 @@ static struct tegra_pcie_bus *tegra_pcie_bus_alloc(struct tegra_pcie *pcie,
 /*
 * Look up a virtual address mapping for the specified bus number. If no such
- * mapping existis, try to create one.
+ * mapping exists, try to create one.
 */
 static void __iomem *tegra_pcie_bus_map(struct tegra_pcie *pcie,
 					unsigned int busnr)
 {
 	struct tegra_pcie_bus *bus;
-	list_for_each_entry(bus, &pcie->busses, list)
+	list_for_each_entry(bus, &pcie->buses, list)
 		if (bus->nr == busnr)
 			return (void __iomem *)bus->area->addr;
@@ -414,7 +414,7 @@ static void __iomem *tegra_pcie_bus_map(struct tegra_pcie *pcie,
 	if (IS_ERR(bus))
 		return NULL;
-	list_add_tail(&bus->list, &pcie->busses);
+	list_add_tail(&bus->list, &pcie->buses);
 	return (void __iomem *)bus->area->addr;
 }
@@ -808,7 +808,7 @@ static int tegra_pcie_enable_controller(struct tegra_pcie *pcie)
 	value &= ~AFI_FUSE_PCIE_T0_GEN2_DIS;
 	afi_writel(pcie, value, AFI_FUSE);
-	/* initialze internal PHY, enable up to 16 PCIE lanes */
+	/* initialize internal PHY, enable up to 16 PCIE lanes */
 	pads_writel(pcie, 0x0, PADS_CTL_SEL);
 	/* override IDDQ to 1 on all 4 lanes */
@@ -1624,7 +1624,7 @@ static int tegra_pcie_probe(struct platform_device *pdev)
 	if (!pcie)
 		return -ENOMEM;
-	INIT_LIST_HEAD(&pcie->busses);
+	INIT_LIST_HEAD(&pcie->buses);
 	INIT_LIST_HEAD(&pcie->ports);
 	pcie->soc_data = match->data;
 	pcie->dev = &pdev->dev;

--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -197,7 +197,7 @@ static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int *pos0)
 			return -ENOSPC;
 		/*
 		 * Check if this position is at correct offset.nvec is always a
-		 * power of two. pos0 must be nvec bit alligned.
+		 * power of two. pos0 must be nvec bit aligned.
 		 */
 		if (pos % msgvec)
 			pos += msgvec - (pos % msgvec);

--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -133,8 +133,8 @@ config HOTPLUG_PCI_RPA_DLPAR
 	  To compile this driver as a module, choose M here: the
 	  module will be called rpadlpar_io.
- 	  When in doubt, say N.
+	  When in doubt, say N.
 config HOTPLUG_PCI_SGI
 	tristate "SGI PCI Hotplug Support"

--- a/drivers/pci/hotplug/Makefile
+++ b/drivers/pci/hotplug/Makefile
@@ -31,7 +31,7 @@ pci_hotplug-objs	+=	cpci_hotplug_core.o	\
 				cpci_hotplug_pci.o
 endif
 ifdef CONFIG_ACPI
-pci_hotplug-objs 	+= 	acpi_pcihp.o
+pci_hotplug-objs	+=	acpi_pcihp.o
 endif
 cpqphp-objs		:=	cpqphp_core.o	\

--- a/drivers/pci/hotplug/acpiphp_core.c
+++ b/drivers/pci/hotplug/acpiphp_core.c
@@ -111,7 +111,7 @@ int acpiphp_register_attention(struct acpiphp_attention_info *info)
 * @info: must match the pointer used to register
 *
 * Description: This is used to un-register a hardware specific acpi
- * driver that manipulates the attention LED.  The pointer to the 
+ * driver that manipulates the attention LED.  The pointer to the
 * info struct must be the same as the one used to set it.
 */
 int acpiphp_unregister_attention(struct acpiphp_attention_info *info)
@@ -169,8 +169,8 @@ static int disable_slot(struct hotplug_slot *hotplug_slot)
 * was registered with us.  This allows hardware specific
 * ACPI implementations to blink the light for us.
 */
- static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
+static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
- {
+{
 	int retval = -ENODEV;
 	pr_debug("%s - physical_slot = %s\n", __func__,
@@ -182,8 +182,8 @@ static int disable_slot(struct hotplug_slot *hotplug_slot)
 	} else
 		attention_info = NULL;
 	return retval;
- }
+}
 /**
 * get_power_status - get power status of a slot
@@ -323,7 +323,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot,
 	if (retval) {
 		pr_err("pci_hp_register failed with error %d\n", retval);
 		goto error_hpslot;
- 	}
+	}
 	pr_info("Slot [%s] registered\n", slot_name(slot));

--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -325,7 +325,7 @@ static acpi_status register_slot(acpi_handle handle, u32 lvl, void *data,
 	list_add_tail(&slot->node, &bridge->slots);
-	/* Register slots for ejectable funtions only. */
+	/* Register slots for ejectable functions only. */
 	if (acpi_pci_check_ejectable(pbus, handle)  || is_dock_device(handle)) {
 		unsigned long long sun;
 		int retval;

--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -116,7 +116,7 @@ static struct bin_attribute ibm_apci_table_attr = {
 	    .read = ibm_read_apci_table,
 	    .write = NULL,
 };
-static struct acpiphp_attention_info ibm_attention_info = 
+static struct acpiphp_attention_info ibm_attention_info =
 {
 	.set_attn = ibm_set_attention_status,
 	.get_attn = ibm_get_attention_status,
@@ -171,9 +171,9 @@ static union apci_descriptor *ibm_slot_from_id(int id)
 */
 static int ibm_set_attention_status(struct hotplug_slot *slot, u8 status)
 {
-	union acpi_object args[2]; 
+	union acpi_object args[2];
 	struct acpi_object_list params = { .pointer = args, .count = 2 };
-	acpi_status stat; 
+	acpi_status stat;
 	unsigned long long rc;
 	union apci_descriptor *ibm_slot;
@@ -208,7 +208,7 @@ static int ibm_set_attention_status(struct hotplug_slot *slot, u8 status)
 *
 * Description: This method is registered with the acpiphp module as a
 * callback to do the device specific task of getting the LED status.
- * 
+ *
 * Because there is no direct method of getting the LED status directly
 * from an ACPI call, we read the aPCI table and parse out our
 * slot descriptor to read the status from that.
@@ -259,7 +259,7 @@ static void ibm_handle_events(acpi_handle handle, u32 event, void *context)
 	pr_debug("%s: Received notification %02x\n", __func__, event);
 	if (subevent == 0x80) {
-		pr_debug("%s: generationg bus event\n", __func__);
+		pr_debug("%s: generating bus event\n", __func__);
 		acpi_bus_generate_netlink_event(note->device->pnp.device_class,
 						  dev_name(&note->device->dev),
 						  note->event, detail);
@@ -387,7 +387,7 @@ static acpi_status __init ibm_find_acpi_device(acpi_handle handle,
 		u32 lvl, void *context, void **rv)
 {
 	acpi_handle *phandle = (acpi_handle *)context;
-	acpi_status status; 
+	acpi_status status;
 	struct acpi_device_info *info;
 	int retval = 0;
@@ -405,7 +405,7 @@ static acpi_status __init ibm_find_acpi_device(acpi_handle handle,
 			info->hardware_id.string, handle);
 		*phandle = handle;
 		/* returning non-zero causes the search to stop
-		 * and returns this value to the caller of 
+		 * and returns this value to the caller of
 		 * acpi_walk_namespace, but it also causes some warnings
 		 * in the acpi debug code to print...
 		 */

--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -46,7 +46,7 @@
 	do {							\
 		if (cpci_debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
-				MY_NAME , ## arg); 		\
+				MY_NAME , ## arg);		\
 	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)

--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -39,7 +39,7 @@ extern int cpci_debug;
 	do {							\
 		if (cpci_debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
-				MY_NAME , ## arg); 		\
+				MY_NAME , ## arg);		\
 	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)

--- a/drivers/pci/hotplug/cpcihp_generic.c
+++ b/drivers/pci/hotplug/cpcihp_generic.c
@@ -13,14 +13,14 @@
 * option) any later version.
 *
 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY 
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * You should have received a copy of the GNU General Public License along
@@ -53,9 +53,9 @@
 #define dbg(format, arg...)					\
 	do {							\
-		if(debug)					\
+		if (debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
-				MY_NAME , ## arg); 		\
+				MY_NAME , ## arg);		\
 	} while(0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)

--- a/drivers/pci/hotplug/cpcihp_zt5550.c
+++ b/drivers/pci/hotplug/cpcihp_zt5550.c
@@ -13,14 +13,14 @@
 * option) any later version.
 *
 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY 
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * You should have received a copy of the GNU General Public License along
@@ -48,9 +48,9 @@
 #define dbg(format, arg...)					\
 	do {							\
-		if(debug)					\
+		if (debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
-				MY_NAME , ## arg); 		\
+				MY_NAME , ## arg);		\
 	} while(0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
@@ -285,7 +285,7 @@ static struct pci_device_id zt5550_hc_pci_tbl[] = {
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, zt5550_hc_pci_tbl);
 static struct pci_driver zt5550_hc_driver = {
 	.name		= "zt5550_hc",
 	.id_table	= zt5550_hc_pci_tbl,

--- a/drivers/pci/hotplug/cpcihp_zt5550.h
+++ b/drivers/pci/hotplug/cpcihp_zt5550.h
@@ -13,14 +13,14 @@
 * option) any later version.
 *
 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY 
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * You should have received a copy of the GNU General Public License along
@@ -55,7 +55,7 @@
 #define HC_CMD_REG		0x0C
 #define ARB_CONFIG_GNT_REG	0x10
 #define ARB_CONFIG_CFG_REG	0x12
-#define ARB_CONFIG_REG	 	0x10
+#define ARB_CONFIG_REG		0x10
 #define ISOL_CONFIG_REG		0x18
 #define FAULT_STATUS_REG	0x20
 #define FAULT_CONFIG_REG	0x24

--- a/drivers/pci/hotplug/cpqphp_core.c
+++ b/drivers/pci/hotplug/cpqphp_core.c
@@ -862,10 +862,10 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_disable_device;
 	}
-	/* Check for the proper subsystem ID's
+	/* Check for the proper subsystem IDs
 	 * Intel uses a different SSID programming model than Compaq.
 	 * For Intel, each SSID bit identifies a PHP capability.
-	 * Also Intel HPC's may have RID=0.
+	 * Also Intel HPCs may have RID=0.
 	 */
 	if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL)) {
 		err(msg_HPC_not_supported);

--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -1231,7 +1231,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 	/* Only if mode change...*/
 	if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
-		((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) 
+		((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
 			set_SOGO(ctrl);
 	wait_for_ctrl_irq(ctrl);
@@ -1828,7 +1828,7 @@ static void interrupt_event_handler(struct controller *ctrl)
 				if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) {
 					dbg("button pressed\n");
-				} else if (ctrl->event_queue[loop].event_type == 
+				} else if (ctrl->event_queue[loop].event_type ==
 					   INT_BUTTON_CANCEL) {
 					dbg("button cancel\n");
 					del_timer(&p_slot->task_event);
@@ -2411,11 +2411,11 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
 		if (rc)
 			return rc;
-		/* find range of busses to use */
+		/* find range of buses to use */
 		dbg("find ranges of buses to use\n");
 		bus_node = get_max_resource(&(resources->bus_head), 1);
-		/* If we don't have any busses to allocate, we can't continue */
+		/* If we don't have any buses to allocate, we can't continue */
 		if (!bus_node)
 			return -ENOMEM;
@@ -2900,7 +2900,7 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
 			/* If this function needs an interrupt and we are behind
 			 * a bridge and the pin is tied to something that's
-			 * alread mapped, set this one the same */
+			 * already mapped, set this one the same */
 			if (temp_byte && resources->irqs &&
 			    (resources->irqs->valid_INT &
 			     (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) {

--- a/drivers/pci/hotplug/cpqphp_pci.c
+++ b/drivers/pci/hotplug/cpqphp_pci.c
@@ -291,7 +291,7 @@ int cpqhp_get_bus_dev (struct controller *ctrl, u8 * bus_num, u8 * dev_num, u8 s
 *
 * Reads configuration for all slots in a PCI bus and saves info.
 *
- * Note:  For non-hot plug busses, the slot # saved is the device #
+ * Note:  For non-hot plug buses, the slot # saved is the device #
 *
 * returns 0 if success
 */
@@ -455,7 +455,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
 * cpqhp_save_slot_config
 *
 * Saves configuration info for all PCI devices in a given slot
- * including subordinate busses.
+ * including subordinate buses.
 *
 * returns 0 if success
 */
@@ -1556,4 +1556,3 @@ void cpqhp_destroy_board_resources (struct pci_func * func)
 		kfree(tres);
 	}
 }
--- a/drivers/pci/hotplug/ibmphp.h
+++ b/drivers/pci/hotplug/ibmphp.h
@@ -59,7 +59,7 @@ extern int ibmphp_debug;
 /************************************************************
-*  RESOURE TYPE                                             *
+*  RESOURCE TYPE                                             *
 ************************************************************/
 #define EBDA_RSRC_TYPE_MASK		0x03
@@ -103,7 +103,7 @@ extern int ibmphp_debug;
 //--------------------------------------------------------------
 struct rio_table_hdr {
-	u8 ver_num; 
+	u8 ver_num;
 	u8 scal_count;
 	u8 riodev_count;
 	u16 offset;
@@ -127,7 +127,7 @@ struct scal_detail {
 };
 //--------------------------------------------------------------
-// RIO DETAIL 
+// RIO DETAIL
 //--------------------------------------------------------------
 struct rio_detail {
@@ -152,7 +152,7 @@ struct opt_rio {
 	u8 first_slot_num;
 	u8 middle_num;
 	struct list_head opt_rio_list;
-};	
+};
 struct opt_rio_lo {
 	u8 rio_type;
@@ -161,7 +161,7 @@ struct opt_rio_lo {
 	u8 middle_num;
 	u8 pack_count;
 	struct list_head opt_rio_lo_list;
-};	
+};
 /****************************************************************
 *  HPC DESCRIPTOR NODE                                          *
@@ -574,7 +574,7 @@ void ibmphp_hpc_stop_poll_thread(void);
 #define HPC_CTLR_IRQ_PENDG	0x80
 //----------------------------------------------------------------------------
-// HPC_CTLR_WROKING status return codes
+// HPC_CTLR_WORKING status return codes
 //----------------------------------------------------------------------------
 #define HPC_CTLR_WORKING_NO	0x00
 #define HPC_CTLR_WORKING_YES	0x01

--- a/drivers/pci/hotplug/ibmphp_core.c
+++ b/drivers/pci/hotplug/ibmphp_core.c
@@ -58,7 +58,7 @@ MODULE_DESCRIPTION (DRIVER_DESC);
 struct pci_bus *ibmphp_pci_bus;
 static int max_slots;
-static int irqs[16];    /* PIC mode IRQ's we're using so far (in case MPS
+static int irqs[16];    /* PIC mode IRQs we're using so far (in case MPS
 			 * tables don't provide default info for empty slots */
 static int init_flag;
@@ -71,20 +71,20 @@ static inline int get_max_adapter_speed (struct hotplug_slot *hs, u8 *value)
 	return get_max_adapter_speed_1 (hs, value, 1);
 }
 */
-static inline int get_cur_bus_info(struct slot **sl) 
+static inline int get_cur_bus_info(struct slot **sl)
 {
 	int rc = 1;
 	struct slot * slot_cur = *sl;
 	debug("options = %x\n", slot_cur->ctrl->options);
-	debug("revision = %x\n", slot_cur->ctrl->revision);	
+	debug("revision = %x\n", slot_cur->ctrl->revision);
-	if (READ_BUS_STATUS(slot_cur->ctrl)) 
+	if (READ_BUS_STATUS(slot_cur->ctrl))
 		rc = ibmphp_hpc_readslot(slot_cur, READ_BUSSTATUS, NULL);
-	if (rc) 
+	if (rc)
 		return rc;
 	slot_cur->bus_on->current_speed = CURRENT_BUS_SPEED(slot_cur->busstatus);
 	if (READ_BUS_MODE(slot_cur->ctrl))
 		slot_cur->bus_on->current_bus_mode =
@@ -96,7 +96,7 @@ static inline int get_cur_bus_info(struct slot **sl)
 			slot_cur->busstatus,
 			slot_cur->bus_on->current_speed,
 			slot_cur->bus_on->current_bus_mode);
 	*sl = slot_cur;
 	return 0;
 }
@@ -104,8 +104,8 @@ static inline int get_cur_bus_info(struct slot **sl)
 static inline int slot_update(struct slot **sl)
 {
 	int rc;
- 	rc = ibmphp_hpc_readslot(*sl, READ_ALLSTAT, NULL);
+	rc = ibmphp_hpc_readslot(*sl, READ_ALLSTAT, NULL);
-	if (rc) 
+	if (rc)
 		return rc;
 	if (!init_flag)
 		rc = get_cur_bus_info(sl);
@@ -172,7 +172,7 @@ int ibmphp_init_devno(struct slot **cur_slot)
 			debug("(*cur_slot)->irq[3] = %x\n",
 					(*cur_slot)->irq[3]);
-			debug("rtable->exlusive_irqs = %x\n",
+			debug("rtable->exclusive_irqs = %x\n",
 					rtable->exclusive_irqs);
 			debug("rtable->slots[loop].irq[0].bitmap = %x\n",
 					rtable->slots[loop].irq[0].bitmap);
@@ -271,7 +271,7 @@ static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value)
 			else
 				rc = -ENODEV;
 		}
-	} else	
+	} else
 		rc = -ENODEV;
 	ibmphp_unlock_operations();
@@ -288,7 +288,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 * value)
 	debug("get_attention_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
 					(ulong) hotplug_slot, (ulong) value);
 	ibmphp_lock_operations();
 	if (hotplug_slot) {
 		pslot = hotplug_slot->private;
@@ -406,14 +406,14 @@ static int get_max_bus_speed(struct slot *slot)
 	ibmphp_lock_operations();
 	mode = slot->supported_bus_mode;
-	speed = slot->supported_speed; 
+	speed = slot->supported_speed;
 	ibmphp_unlock_operations();
 	switch (speed) {
 	case BUS_SPEED_33:
 		break;
 	case BUS_SPEED_66:
-		if (mode == BUS_MODE_PCIX) 
+		if (mode == BUS_MODE_PCIX)
 			speed += 0x01;
 		break;
 	case BUS_SPEED_100:
@@ -515,13 +515,13 @@ static int __init init_ops(void)
 		debug("BEFORE GETTING SLOT STATUS, slot # %x\n",
 							slot_cur->number);
-		if (slot_cur->ctrl->revision == 0xFF) 
+		if (slot_cur->ctrl->revision == 0xFF)
 			if (get_ctrl_revision(slot_cur,
 						&slot_cur->ctrl->revision))
 				return -1;
-		if (slot_cur->bus_on->current_speed == 0xFF) 
+		if (slot_cur->bus_on->current_speed == 0xFF)
-			if (get_cur_bus_info(&slot_cur)) 
+			if (get_cur_bus_info(&slot_cur))
 				return -1;
 		get_max_bus_speed(slot_cur);
@@ -539,8 +539,8 @@ static int __init init_ops(void)
 		debug("SLOT_PRESENT = %x\n", SLOT_PRESENT(slot_cur->status));
 		debug("SLOT_LATCH = %x\n", SLOT_LATCH(slot_cur->status));
-		if ((SLOT_PWRGD(slot_cur->status)) && 
+		if ((SLOT_PWRGD(slot_cur->status)) &&
-		    !(SLOT_PRESENT(slot_cur->status)) && 
+		    !(SLOT_PRESENT(slot_cur->status)) &&
 		    !(SLOT_LATCH(slot_cur->status))) {
 			debug("BEFORE POWER OFF COMMAND\n");
 				rc = power_off(slot_cur);
@@ -581,13 +581,13 @@ static int validate(struct slot *slot_cur, int opn)
 	switch (opn) {
 		case ENABLE:
-			if (!(SLOT_PWRGD(slot_cur->status)) && 
+			if (!(SLOT_PWRGD(slot_cur->status)) &&
-			     (SLOT_PRESENT(slot_cur->status)) && 
+			     (SLOT_PRESENT(slot_cur->status)) &&
 			     !(SLOT_LATCH(slot_cur->status)))
 				return 0;
 			break;
 		case DISABLE:
-			if ((SLOT_PWRGD(slot_cur->status)) && 
+			if ((SLOT_PWRGD(slot_cur->status)) &&
 			    (SLOT_PRESENT(slot_cur->status)) &&
 			    !(SLOT_LATCH(slot_cur->status)))
 				return 0;
@@ -617,7 +617,7 @@ int ibmphp_update_slot_info(struct slot *slot_cur)
 		err("out of system memory\n");
 		return -ENOMEM;
 	}
 	info->power_status = SLOT_PWRGD(slot_cur->status);
 	info->attention_status = SLOT_ATTN(slot_cur->status,
 						slot_cur->ext_status);
@@ -638,7 +638,7 @@ int ibmphp_update_slot_info(struct slot *slot_cur)
 		case BUS_SPEED_33:
 			break;
 		case BUS_SPEED_66:
-			if (mode == BUS_MODE_PCIX) 
+			if (mode == BUS_MODE_PCIX)
 				bus_speed += 0x01;
 			else if (mode == BUS_MODE_PCI)
 				;
@@ -654,8 +654,8 @@ int ibmphp_update_slot_info(struct slot *slot_cur)
 	}
 	bus->cur_bus_speed = bus_speed;
-	// To do: bus_names 
+	// To do: bus_names
 	rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info);
 	kfree(info);
 	return rc;
@@ -729,8 +729,8 @@ static void ibm_unconfigure_device(struct pci_func *func)
 }
 /*
- * The following function is to fix kernel bug regarding 
+ * The following function is to fix kernel bug regarding
- * getting bus entries, here we manually add those primary 
+ * getting bus entries, here we manually add those primary
 * bus entries to kernel bus structure whenever apply
 */
 static u8 bus_structure_fixup(u8 busno)
@@ -814,7 +814,7 @@ static int ibm_configure_device(struct pci_func *func)
 }
 /*******************************************************
- * Returns whether the bus is empty or not 
+ * Returns whether the bus is empty or not
 *******************************************************/
 static int is_bus_empty(struct slot * slot_cur)
 {
@@ -842,7 +842,7 @@ static int is_bus_empty(struct slot * slot_cur)
 }
 /***********************************************************
- * If the HPC permits and the bus currently empty, tries to set the 
+ * If the HPC permits and the bus currently empty, tries to set the
 * bus speed and mode at the maximum card and bus capability
 * Parameters: slot
 * Returns: bus is set (0) or error code
@@ -856,7 +856,7 @@ static int set_bus(struct slot * slot_cur)
 	static struct pci_device_id ciobx[] = {
 		{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 0x0101) },
 	        { },
-	};	
+	};
 	debug("%s - entry slot # %d\n", __func__, slot_cur->number);
 	if (SET_BUS_STATUS(slot_cur->ctrl) && is_bus_empty(slot_cur)) {
@@ -877,7 +877,7 @@ static int set_bus(struct slot * slot_cur)
 				else if (!SLOT_BUS_MODE(slot_cur->ext_status))
 					/* if max slot/bus capability is 66 pci
 					and there's no bus mode mismatch, then
-					the adapter supports 66 pci */ 
+					the adapter supports 66 pci */
 					cmd = HPC_BUS_66CONVMODE;
 				else
 					cmd = HPC_BUS_33CONVMODE;
@@ -930,7 +930,7 @@ static int set_bus(struct slot * slot_cur)
 			return -EIO;
 		}
 	}
-	/* This is for x440, once Brandon fixes the firmware, 
+	/* This is for x440, once Brandon fixes the firmware,
 	will not need this delay */
 	msleep(1000);
 	debug("%s -Exit\n", __func__);
@@ -938,9 +938,9 @@ static int set_bus(struct slot * slot_cur)
 }
 /* This routine checks the bus limitations that the slot is on from the BIOS.
- * This is used in deciding whether or not to power up the slot.  
+ * This is used in deciding whether or not to power up the slot.
 * (electrical/spec limitations. For example, >1 133 MHz or >2 66 PCI cards on
- * same bus) 
+ * same bus)
 * Parameters: slot
 * Returns: 0 = no limitations, -EINVAL = exceeded limitations on the bus
 */
@@ -986,7 +986,7 @@ static int check_limitations(struct slot *slot_cur)
 static inline void print_card_capability(struct slot *slot_cur)
 {
 	info("capability of the card is ");
-	if ((slot_cur->ext_status & CARD_INFO) == PCIX133) 
+	if ((slot_cur->ext_status & CARD_INFO) == PCIX133)
 		info("   133 MHz PCI-X\n");
 	else if ((slot_cur->ext_status & CARD_INFO) == PCIX66)
 		info("    66 MHz PCI-X\n");
@@ -1020,7 +1020,7 @@ static int enable_slot(struct hotplug_slot *hs)
 	}
 	attn_LED_blink(slot_cur);
 	rc = set_bus(slot_cur);
 	if (rc) {
 		err("was not able to set the bus\n");
@@ -1082,7 +1082,7 @@ static int enable_slot(struct hotplug_slot *hs)
 	rc = slot_update(&slot_cur);
 	if (rc)
 		goto error_power;
 	rc = -EINVAL;
 	if (SLOT_POWER(slot_cur->status) && !(SLOT_PWRGD(slot_cur->status))) {
 		err("power fault occurred trying to power up...\n");
@@ -1093,7 +1093,7 @@ static int enable_slot(struct hotplug_slot *hs)
 					"speed and card capability\n");
 		print_card_capability(slot_cur);
 		goto error_power;
-	} 
+	}
 	/* Don't think this case will happen after above checks...
 	 * but just in case, for paranoia sake */
 	if (!(SLOT_POWER(slot_cur->status))) {
@@ -1144,7 +1144,7 @@ static int enable_slot(struct hotplug_slot *hs)
 	ibmphp_print_test();
 	rc = ibmphp_update_slot_info(slot_cur);
 exit:
-	ibmphp_unlock_operations(); 
+	ibmphp_unlock_operations();
 	return rc;
 error_nopower:
@@ -1180,7 +1180,7 @@ static int ibmphp_disable_slot(struct hotplug_slot *hotplug_slot)
 {
 	struct slot *slot = hotplug_slot->private;
 	int rc;
 	ibmphp_lock_operations();
 	rc = ibmphp_do_disable_slot(slot);
 	ibmphp_unlock_operations();
@@ -1192,12 +1192,12 @@ int ibmphp_do_disable_slot(struct slot *slot_cur)
 	int rc;
 	u8 flag;
-	debug("DISABLING SLOT...\n"); 
+	debug("DISABLING SLOT...\n");
 	if ((slot_cur == NULL) || (slot_cur->ctrl == NULL)) {
 		return -ENODEV;
 	}
 	flag = slot_cur->flag;
 	slot_cur->flag = 1;
@@ -1210,7 +1210,7 @@ int ibmphp_do_disable_slot(struct slot *slot_cur)
 	attn_LED_blink(slot_cur);
 	if (slot_cur->func == NULL) {
-		/* We need this for fncs's that were there on bootup */
+		/* We need this for functions that were there on bootup */
 		slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL);
 		if (!slot_cur->func) {
 			err("out of system memory\n");
@@ -1222,12 +1222,13 @@ int ibmphp_do_disable_slot(struct slot *slot_cur)
 	}
 	ibm_unconfigure_device(slot_cur->func);
-	/* If we got here from latch suddenly opening on operating card or 
+	/*
-	a power fault, there's no power to the card, so cannot
+	 * If we got here from latch suddenly opening on operating card or
-	read from it to determine what resources it occupied.  This operation
+	 * a power fault, there's no power to the card, so cannot
-	is forbidden anyhow.  The best we can do is remove it from kernel
+	 * read from it to determine what resources it occupied.  This operation
-	lists at least */
+	 * is forbidden anyhow.  The best we can do is remove it from kernel
+	 * lists at least */
 	if (!flag) {
 		attn_off(slot_cur);
@@ -1264,7 +1265,7 @@ int ibmphp_do_disable_slot(struct slot *slot_cur)
 		rc = -EFAULT;
 		goto exit;
 	}
-	if (flag)		
+	if (flag)
 		ibmphp_update_slot_info(slot_cur);
 	goto exit;
 }
@@ -1339,7 +1340,7 @@ static int __init ibmphp_init(void)
 	debug("AFTER Resource & EBDA INITIALIZATIONS\n");
 	max_slots = get_max_slots();
 	if ((rc = ibmphp_register_pci()))
 		goto error;

--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -123,7 +123,7 @@ static struct ebda_pci_rsrc *alloc_ebda_pci_rsrc (void)
 static void __init print_bus_info (void)
 {
 	struct bus_info *ptr;
 	list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
 		debug ("%s - slot_min = %x\n", __func__, ptr->slot_min);
 		debug ("%s - slot_max = %x\n", __func__, ptr->slot_max);
@@ -131,7 +131,7 @@ static void __init print_bus_info (void)
 		debug ("%s - bus# = %x\n", __func__, ptr->busno);
 		debug ("%s - current_speed = %x\n", __func__, ptr->current_speed);
 		debug ("%s - controller_id = %x\n", __func__, ptr->controller_id);
 		debug ("%s - slots_at_33_conv = %x\n", __func__, ptr->slots_at_33_conv);
 		debug ("%s - slots_at_66_conv = %x\n", __func__, ptr->slots_at_66_conv);
 		debug ("%s - slots_at_66_pcix = %x\n", __func__, ptr->slots_at_66_pcix);
@@ -144,7 +144,7 @@ static void __init print_bus_info (void)
 static void print_lo_info (void)
 {
 	struct rio_detail *ptr;
-	debug ("print_lo_info ----\n");	
+	debug ("print_lo_info ----\n");
 	list_for_each_entry(ptr, &rio_lo_head, rio_detail_list) {
 		debug ("%s - rio_node_id = %x\n", __func__, ptr->rio_node_id);
 		debug ("%s - rio_type = %x\n", __func__, ptr->rio_type);
@@ -176,7 +176,7 @@ static void __init print_ebda_pci_rsrc (void)
 	struct ebda_pci_rsrc *ptr;
 	list_for_each_entry(ptr, &ibmphp_ebda_pci_rsrc_head, ebda_pci_rsrc_list) {
-		debug ("%s - rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n", 
+		debug ("%s - rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
 			__func__, ptr->rsrc_type ,ptr->bus_num, ptr->dev_fun,ptr->start_addr, ptr->end_addr);
 	}
 }
@@ -259,7 +259,7 @@ int __init ibmphp_access_ebda (void)
 	ebda_seg = readw (io_mem);
 	iounmap (io_mem);
 	debug ("returned ebda segment: %x\n", ebda_seg);
 	io_mem = ioremap(ebda_seg<<4, 1);
 	if (!io_mem)
 		return -ENOMEM;
@@ -310,7 +310,7 @@ int __init ibmphp_access_ebda (void)
 			re = readw (io_mem + sub_addr);	/* next sub blk */
 			sub_addr += 2;
-			rc_id = readw (io_mem + sub_addr); 	/* sub blk id */
+			rc_id = readw (io_mem + sub_addr);	/* sub blk id */
 			sub_addr += 2;
 			if (rc_id != 0x5243)
@@ -330,7 +330,7 @@ int __init ibmphp_access_ebda (void)
 			debug ("info about hpc descriptor---\n");
 			debug ("hot blk format: %x\n", format);
 			debug ("num of controller: %x\n", num_ctlrs);
-			debug ("offset of hpc data structure enteries: %x\n ", sub_addr);
+			debug ("offset of hpc data structure entries: %x\n ", sub_addr);
 			sub_addr = base + re;	/* re sub blk */
 			/* FIXME: rc is never used/checked */
@@ -359,7 +359,7 @@ int __init ibmphp_access_ebda (void)
 			debug ("info about rsrc descriptor---\n");
 			debug ("format: %x\n", format);
 			debug ("num of rsrc: %x\n", num_entries);
-			debug ("offset of rsrc data structure enteries: %x\n ", sub_addr);
+			debug ("offset of rsrc data structure entries: %x\n ", sub_addr);
 			hs_complete = 1;
 		} else {
@@ -376,7 +376,7 @@ int __init ibmphp_access_ebda (void)
 			rio_table_ptr->scal_count = readb (io_mem + offset + 1);
 			rio_table_ptr->riodev_count = readb (io_mem + offset + 2);
 			rio_table_ptr->offset = offset +3 ;
 			debug("info about rio table hdr ---\n");
 			debug("ver_num: %x\nscal_count: %x\nriodev_count: %x\noffset of rio table: %x\n ",
 				rio_table_ptr->ver_num, rio_table_ptr->scal_count,
@@ -440,12 +440,12 @@ static int __init ebda_rio_table (void)
 		rio_detail_ptr->chassis_num = readb (io_mem + offset + 14);
 //		debug ("rio_node_id: %x\nbbar: %x\nrio_type: %x\nowner_id: %x\nport0_node: %x\nport0_port: %x\nport1_node: %x\nport1_port: %x\nfirst_slot_num: %x\nstatus: %x\n", rio_detail_ptr->rio_node_id, rio_detail_ptr->bbar, rio_detail_ptr->rio_type, rio_detail_ptr->owner_id, rio_detail_ptr->port0_node_connect, rio_detail_ptr->port0_port_connect, rio_detail_ptr->port1_node_connect, rio_detail_ptr->port1_port_connect, rio_detail_ptr->first_slot_num, rio_detail_ptr->status);
 		//create linked list of chassis
-		if (rio_detail_ptr->rio_type == 4 || rio_detail_ptr->rio_type == 5) 
+		if (rio_detail_ptr->rio_type == 4 || rio_detail_ptr->rio_type == 5)
 			list_add (&rio_detail_ptr->rio_detail_list, &rio_vg_head);
-		//create linked list of expansion box				
+		//create linked list of expansion box
-		else if (rio_detail_ptr->rio_type == 6 || rio_detail_ptr->rio_type == 7) 
+		else if (rio_detail_ptr->rio_type == 6 || rio_detail_ptr->rio_type == 7)
 			list_add (&rio_detail_ptr->rio_detail_list, &rio_lo_head);
-		else 
+		else
 			// not in my concern
 			kfree (rio_detail_ptr);
 		offset += 15;
@@ -456,7 +456,7 @@ static int __init ebda_rio_table (void)
 }
 /*
- * reorganizing linked list of chassis	 
+ * reorganizing linked list of chassis
 */
 static struct opt_rio *search_opt_vg (u8 chassis_num)
 {
@@ -464,7 +464,7 @@ static struct opt_rio *search_opt_vg (u8 chassis_num)
 	list_for_each_entry(ptr, &opt_vg_head, opt_rio_list) {
 		if (ptr->chassis_num == chassis_num)
 			return ptr;
-	}		
+	}
 	return NULL;
 }
@@ -472,7 +472,7 @@ static int __init combine_wpg_for_chassis (void)
 {
 	struct opt_rio *opt_rio_ptr = NULL;
 	struct rio_detail *rio_detail_ptr = NULL;
 	list_for_each_entry(rio_detail_ptr, &rio_vg_head, rio_detail_list) {
 		opt_rio_ptr = search_opt_vg (rio_detail_ptr->chassis_num);
 		if (!opt_rio_ptr) {
@@ -484,14 +484,14 @@ static int __init combine_wpg_for_chassis (void)
 			opt_rio_ptr->first_slot_num = rio_detail_ptr->first_slot_num;
 			opt_rio_ptr->middle_num = rio_detail_ptr->first_slot_num;
 			list_add (&opt_rio_ptr->opt_rio_list, &opt_vg_head);
-		} else {	
+		} else {
 			opt_rio_ptr->first_slot_num = min (opt_rio_ptr->first_slot_num, rio_detail_ptr->first_slot_num);
 			opt_rio_ptr->middle_num = max (opt_rio_ptr->middle_num, rio_detail_ptr->first_slot_num);
-		}	
+		}
 	}
 	print_opt_vg ();
-	return 0;	
+	return 0;
-}	
+}
 /*
 * reorganizing linked list of expansion box
@@ -502,7 +502,7 @@ static struct opt_rio_lo *search_opt_lo (u8 chassis_num)
 	list_for_each_entry(ptr, &opt_lo_head, opt_rio_lo_list) {
 		if (ptr->chassis_num == chassis_num)
 			return ptr;
-	}		
+	}
 	return NULL;
 }
@@ -510,7 +510,7 @@ static int combine_wpg_for_expansion (void)
 {
 	struct opt_rio_lo *opt_rio_lo_ptr = NULL;
 	struct rio_detail *rio_detail_ptr = NULL;
 	list_for_each_entry(rio_detail_ptr, &rio_lo_head, rio_detail_list) {
 		opt_rio_lo_ptr = search_opt_lo (rio_detail_ptr->chassis_num);
 		if (!opt_rio_lo_ptr) {
@@ -522,22 +522,22 @@ static int combine_wpg_for_expansion (void)
 			opt_rio_lo_ptr->first_slot_num = rio_detail_ptr->first_slot_num;
 			opt_rio_lo_ptr->middle_num = rio_detail_ptr->first_slot_num;
 			opt_rio_lo_ptr->pack_count = 1;
 			list_add (&opt_rio_lo_ptr->opt_rio_lo_list, &opt_lo_head);
-		} else {	
+		} else {
 			opt_rio_lo_ptr->first_slot_num = min (opt_rio_lo_ptr->first_slot_num, rio_detail_ptr->first_slot_num);
 			opt_rio_lo_ptr->middle_num = max (opt_rio_lo_ptr->middle_num, rio_detail_ptr->first_slot_num);
 			opt_rio_lo_ptr->pack_count = 2;
-		}	
+		}
 	}
-	return 0;	
+	return 0;
 }
 /* Since we don't know the max slot number per each chassis, hence go
 * through the list of all chassis to find out the range
- * Arguments: slot_num, 1st slot number of the chassis we think we are on, 
+ * Arguments: slot_num, 1st slot number of the chassis we think we are on,
- * var (0 = chassis, 1 = expansion box) 
+ * var (0 = chassis, 1 = expansion box)
 */
 static int first_slot_num (u8 slot_num, u8 first_slot, u8 var)
 {
@@ -547,7 +547,7 @@ static int first_slot_num (u8 slot_num, u8 first_slot, u8 var)
 	if (!var) {
 		list_for_each_entry(opt_vg_ptr, &opt_vg_head, opt_rio_list) {
-			if ((first_slot < opt_vg_ptr->first_slot_num) && (slot_num >= opt_vg_ptr->first_slot_num)) { 
+			if ((first_slot < opt_vg_ptr->first_slot_num) && (slot_num >= opt_vg_ptr->first_slot_num)) {
 				rc = -ENODEV;
 				break;
 			}
@@ -569,7 +569,7 @@ static struct opt_rio_lo * find_rxe_num (u8 slot_num)
 	list_for_each_entry(opt_lo_ptr, &opt_lo_head, opt_rio_lo_list) {
 		//check to see if this slot_num belongs to expansion box
-		if ((slot_num >= opt_lo_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_lo_ptr->first_slot_num, 1))) 
+		if ((slot_num >= opt_lo_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_lo_ptr->first_slot_num, 1)))
 			return opt_lo_ptr;
 	}
 	return NULL;
@@ -580,8 +580,8 @@ static struct opt_rio * find_chassis_num (u8 slot_num)
 	struct opt_rio *opt_vg_ptr;
 	list_for_each_entry(opt_vg_ptr, &opt_vg_head, opt_rio_list) {
-		//check to see if this slot_num belongs to chassis 
+		//check to see if this slot_num belongs to chassis
-		if ((slot_num >= opt_vg_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_vg_ptr->first_slot_num, 0))) 
+		if ((slot_num >= opt_vg_ptr->first_slot_num) && (!first_slot_num (slot_num, opt_vg_ptr->first_slot_num, 0)))
 			return opt_vg_ptr;
 	}
 	return NULL;
@@ -594,13 +594,13 @@ static u8 calculate_first_slot (u8 slot_num)
 {
 	u8 first_slot = 1;
 	struct slot * slot_cur;
 	list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
 		if (slot_cur->ctrl) {
-			if ((slot_cur->ctrl->ctlr_type != 4) && (slot_cur->ctrl->ending_slot_num > first_slot) && (slot_num > slot_cur->ctrl->ending_slot_num)) 
+			if ((slot_cur->ctrl->ctlr_type != 4) && (slot_cur->ctrl->ending_slot_num > first_slot) && (slot_num > slot_cur->ctrl->ending_slot_num))
 				first_slot = slot_cur->ctrl->ending_slot_num;
 		}
-	}			
+	}
 	return first_slot + 1;
 }
@@ -622,11 +622,11 @@ static char *create_file_name (struct slot * slot_cur)
 		err ("Structure passed is empty\n");
 		return NULL;
 	}
 	slot_num = slot_cur->number;
 	memset (str, 0, sizeof(str));
 	if (rio_table_ptr) {
 		if (rio_table_ptr->ver_num == 3) {
 			opt_vg_ptr = find_chassis_num (slot_num);
@@ -660,7 +660,7 @@ static char *create_file_name (struct slot * slot_cur)
 			/* if both NULL and we DO have correct RIO table in BIOS */
 			return NULL;
 		}
-	} 
+	}
 	if (!flag) {
 		if (slot_cur->ctrl->ctlr_type == 4) {
 			first_slot = calculate_first_slot (slot_num);
@@ -798,7 +798,7 @@ static int __init ebda_rsrc_controller (void)
 			slot_ptr->ctl_index = readb (io_mem + addr_slot + 2*slot_num);
 			slot_ptr->slot_cap = readb (io_mem + addr_slot + 3*slot_num);
-			// create bus_info lined list --- if only one slot per bus: slot_min = slot_max 
+			// create bus_info lined list --- if only one slot per bus: slot_min = slot_max
 			bus_info_ptr2 = ibmphp_find_same_bus_num (slot_ptr->slot_bus_num);
 			if (!bus_info_ptr2) {
@@ -814,9 +814,9 @@ static int __init ebda_rsrc_controller (void)
 				bus_info_ptr1->index = bus_index++;
 				bus_info_ptr1->current_speed = 0xff;
 				bus_info_ptr1->current_bus_mode = 0xff;
 				bus_info_ptr1->controller_id = hpc_ptr->ctlr_id;
 				list_add_tail (&bus_info_ptr1->bus_info_list, &bus_info_head);
 			} else {
@@ -851,7 +851,7 @@ static int __init ebda_rsrc_controller (void)
 				bus_info_ptr2->slots_at_66_conv = bus_ptr->slots_at_66_conv;
 				bus_info_ptr2->slots_at_66_pcix = bus_ptr->slots_at_66_pcix;
 				bus_info_ptr2->slots_at_100_pcix = bus_ptr->slots_at_100_pcix;
-				bus_info_ptr2->slots_at_133_pcix = bus_ptr->slots_at_133_pcix; 
+				bus_info_ptr2->slots_at_133_pcix = bus_ptr->slots_at_133_pcix;
 			}
 			bus_ptr++;
 		}
@@ -864,7 +864,7 @@ static int __init ebda_rsrc_controller (void)
 				hpc_ptr->u.pci_ctlr.dev_fun = readb (io_mem + addr + 1);
 				hpc_ptr->irq = readb (io_mem + addr + 2);
 				addr += 3;
-				debug ("ctrl bus = %x, ctlr devfun = %x, irq = %x\n", 
+				debug ("ctrl bus = %x, ctlr devfun = %x, irq = %x\n",
 					hpc_ptr->u.pci_ctlr.bus,
 					hpc_ptr->u.pci_ctlr.dev_fun, hpc_ptr->irq);
 				break;
@@ -932,7 +932,7 @@ static int __init ebda_rsrc_controller (void)
 				tmp_slot->supported_speed =  2;
 			else if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_66_MAX) == EBDA_SLOT_66_MAX)
 				tmp_slot->supported_speed =  1;
 			if ((hpc_ptr->slots[index].slot_cap & EBDA_SLOT_PCIX_CAP) == EBDA_SLOT_PCIX_CAP)
 				tmp_slot->supported_bus_mode = 1;
 			else
@@ -1000,7 +1000,7 @@ static int __init ebda_rsrc_controller (void)
 	return rc;
 }
-/* 
+/*
 * map info (bus, devfun, start addr, end addr..) of i/o, memory,
 * pfm from the physical addr to a list of resource.
 */
@@ -1057,7 +1057,7 @@ static int __init ebda_rsrc_rsrc (void)
 			addr += 10;
 			debug ("rsrc from mem or pfm ---\n");
-			debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n", 
+			debug ("rsrc type: %x bus#: %x dev_func: %x start addr: %x end addr: %x\n",
 				rsrc_ptr->rsrc_type, rsrc_ptr->bus_num, rsrc_ptr->dev_fun, rsrc_ptr->start_addr, rsrc_ptr->end_addr);
 			list_add (&rsrc_ptr->ebda_pci_rsrc_list, &ibmphp_ebda_pci_rsrc_head);
@@ -1096,7 +1096,7 @@ struct bus_info *ibmphp_find_same_bus_num (u32 num)
 	struct bus_info *ptr;
 	list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
-		if (ptr->busno == num) 
+		if (ptr->busno == num)
 			 return ptr;
 	}
 	return NULL;
@@ -1110,7 +1110,7 @@ int ibmphp_get_bus_index (u8 num)
 	struct bus_info *ptr;
 	list_for_each_entry(ptr, &bus_info_head, bus_info_list) {
-		if (ptr->busno == num)  
+		if (ptr->busno == num)
 			return ptr->index;
 	}
 	return -ENODEV;
@@ -1168,7 +1168,7 @@ static struct pci_device_id id_table[] = {
 		.subdevice	= HPC_SUBSYSTEM_ID,
 		.class		= ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00),
 	}, {}
-};		
+};
 MODULE_DEVICE_TABLE(pci, id_table);
@@ -1197,7 +1197,7 @@ static int ibmphp_probe (struct pci_dev * dev, const struct pci_device_id *ids)
 	struct controller *ctrl;
 	debug ("inside ibmphp_probe\n");
 	list_for_each_entry(ctrl, &ebda_hpc_head, ebda_hpc_list) {
 		if (ctrl->ctlr_type == 1) {
 			if ((dev->devfn == ctrl->u.pci_ctlr.dev_fun) && (dev->bus->number == ctrl->u.pci_ctlr.bus)) {
@@ -1210,4 +1210,3 @@ static int ibmphp_probe (struct pci_dev * dev, const struct pci_device_id *ids)
 	}
 	return -ENODEV;
 }
--- a/drivers/pci/hotplug/ibmphp_hpc.c
+++ b/drivers/pci/hotplug/ibmphp_hpc.c
@@ -258,7 +258,7 @@ static u8 i2c_ctrl_write (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8
 {
 	u8 rc;
 	void __iomem *wpg_addr;	// base addr + offset
-	unsigned long wpg_data;	// data to/from WPG LOHI format 
+	unsigned long wpg_data;	// data to/from WPG LOHI format
 	unsigned long ultemp;
 	unsigned long data;	// actual data HILO format
 	int i;
@@ -351,7 +351,7 @@ static u8 i2c_ctrl_write (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8
 }
 //------------------------------------------------------------
-//  Read from ISA type HPC 
+//  Read from ISA type HPC
 //------------------------------------------------------------
 static u8 isa_ctrl_read (struct controller *ctlr_ptr, u8 offset)
 {
@@ -372,7 +372,7 @@ static void isa_ctrl_write (struct controller *ctlr_ptr, u8 offset, u8 data)
 {
 	u16 start_address;
 	u16 port_address;
 	start_address = ctlr_ptr->u.isa_ctlr.io_start;
 	port_address = start_address + (u16) offset;
 	outb (data, port_address);
@@ -656,11 +656,11 @@ int ibmphp_hpc_readslot (struct slot * pslot, u8 cmd, u8 * pstatus)
 	//--------------------------------------------------------------------
 	// cleanup
 	//--------------------------------------------------------------------
 	// remove physical to logical address mapping
 	if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
 		iounmap (wpg_bbar);
 	free_hpc_access ();
 	debug_polling ("%s - Exit rc[%d]\n", __func__, rc);
@@ -835,7 +835,7 @@ static int poll_hpc(void *data)
 		down (&semOperations);
 		switch (poll_state) {
-		case POLL_LATCH_REGISTER: 
+		case POLL_LATCH_REGISTER:
 			oldlatchlow = curlatchlow;
 			ctrl_count = 0x00;
 			list_for_each (pslotlist, &ibmphp_slot_head) {
@@ -892,16 +892,16 @@ static int poll_hpc(void *data)
 			if (kthread_should_stop())
 				goto out_sleep;
 			down (&semOperations);
 			if (poll_count >= POLL_LATCH_CNT) {
 				poll_count = 0;
 				poll_state = POLL_SLOTS;
 			} else
 				poll_state = POLL_LATCH_REGISTER;
 			break;
-		}	
+		}
 		/* give up the hardware semaphore */
 		up (&semOperations);
 		/* sleep for a short time just for good measure */
@@ -958,7 +958,7 @@ static int process_changeinstatus (struct slot *pslot, struct slot *poldslot)
 	// bit 5 - HPC_SLOT_PWRGD
 	if ((pslot->status & 0x20) != (poldslot->status & 0x20))
 		// OFF -> ON: ignore, ON -> OFF: disable slot
-		if ((poldslot->status & 0x20) && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status))) 
+		if ((poldslot->status & 0x20) && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status)))
 			disable = 1;
 	// bit 6 - HPC_SLOT_BUS_SPEED
@@ -980,7 +980,7 @@ static int process_changeinstatus (struct slot *pslot, struct slot *poldslot)
 					pslot->status &= ~HPC_SLOT_POWER;
 			}
 		}
-		// CLOSE -> OPEN 
+		// CLOSE -> OPEN
 		else if ((SLOT_PWRGD (poldslot->status) == HPC_SLOT_PWRGD_GOOD)
 			&& (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status))) {
 			disable = 1;
@@ -1075,7 +1075,7 @@ void __exit ibmphp_hpc_stop_poll_thread (void)
 	debug ("before locking operations \n");
 	ibmphp_lock_operations ();
 	debug ("after locking operations \n");
 	// wait for poll thread to exit
 	debug ("before sem_exit down \n");
 	down (&sem_exit);