Use the per-feature check flags for the unwinding feature in order to
correctly compile the test-all, libunwind and libunwind-debug-frame
feature checks.

Tested on x86_64, ARMv7 and ARMv8 with and without LIBUNWIND_DIR set in
'make -C tools/perf'

Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: patches@linaro.org
Link: http://lkml.kernel.org/r/1386678244-13535-3-git-send-email-jean.pihet@linaro.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add CFLAGS and LDFLAGS for each feature to be checked. This allows to
pass flags and parameters to the feature checks compilation.  Also
simplifies the feature check makefile, to come in a subsequent patch.

Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linaro-kernel@lists.linaro.org
Cc: patches@linaro.org
Link: http://lkml.kernel.org/r/1386678244-13535-2-git-send-email-jean.pihet@linaro.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The basename() implementation varies a lot between systems.

The Linux man page says: "basename may modify the content of the path,
so it may be desirable to pass a copy when calling the function".

On some other systems, the returned address may come from an internal
buffer which can be reused in subsequent calls, thus the results should
also be copied.

The dso__set_basename() function was not doing this causing problems
on some systems with wrong library names being shown by perf report,
such as on Android systems.

This patch fixes the problem.
The patch is relative to tip.git.

In v2, we clean up the comments based on Ingo's feedback.

Reported-by: Ben Cheng <bccheng@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Cheng <bccheng@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131205182642.GA14614@quad


[ v3: Fixed up wrt allocated flag now being set in dso__set_short_name ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The 'file' is more commonly associated with a file descriptor of
some sort, rename it to 'filename' as this is the more common idiom
for a file name argument.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0ehaawv5xc83w6ag03c5hi10@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Those methods are not supposed to change the data structures they
manipulate, so make that clearer by using the const qualifier in the
function signature and in some variables.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-j7oyakex7zy3r82h33rdw25x@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To help in debugging use after free bugs.

Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-3ckwsob2g1q23s77nuhexrq7@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Same reason as for dso->short_name, it may point to a const string, and
in most places it is treated as const, i.e. it is just accessed for
using its contents as a key or to show it on reports.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nf7mxf33zt5qw207pbxxryot@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Instead of expecting callers to set this member accodingly so that later
at dso destruction it can, if needed, be correctly free()d, make it a
requirement by passing it as a parameter to dso__set_long_name.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-na7t1tqim22vuqkt4zq5n4ri@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This is a preparatory patch to do with dso__set_long_name what was done
with the short name variant.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-mb7eqhkyejq1qcf3p22wz2x7@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Instead of expecting callers to set this member accodingly so that later
at dso destruction it can, if needed, be correctly free()d, make it a
requirement by passing it as a parameter to dso__set_short_name.

Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/52A707A2.5020802@intel.com


[ Renamed the 'allocated' parameter to clearly indicate to which variable it refers to. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Use dso__set_short_name instead, as it will release any previously,
possibly allocated, short name.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-1v39elw7v6nxczpntpp7ljwr@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So we now have:

   dso->short_name
   dso->short_name_len
   dso->short_name_allocated

Ditto for the 'long  variants. To more quickly grasp what they refer to.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-nu228f8vlp9w0lr7c0q77dqi@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently the perf.data header is always displayed for stdio output,
which is no always useful.

Disabling header information by default and adding following options to
control header output:

  --header      - display header information
  --header-only - display header information only w/o further
                  processing

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-0ehaawv5xc83w6ag03c5hi10@git.kernel.org
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386583370-1699-3-git-send-email-jolsa@redhat.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Currently the perf.data header is always displayed for stdio output,
which is no always useful.

Disabling header information by default and adding following options to
control header output:

  --header      - display header information (old default)
  --header-only - display header information only w/o further
                  processing, forces stdio output

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386583370-1699-2-git-send-email-jolsa@redhat.com


[ Added single line explaining talking about the new --header* options,
  to address David Ahern comment; better man page entry for the new options,
  from Namhyung Kim ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In manpage of perf-kvm, --guestmount is supported by diff command, but
it does not work well.

This patch change the extend the checking in buildid-diff from
guestkallsyms or guestmodules to perf_guest. Then this checking can
cover the all cases perf kvm is used for.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/72857ed89642e0633f5e88f7e7abbc9645359e8e.1386368672.git.yangds.fnst@cn.fujitsu.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The code in builtin-kvm.c to generate filename for perf-kvm is useful to
other command such as builtin-diff.

This patch move the related code form builtin-kvm.c to util/util.c and
wrap them in a function named get_filename_for_perf_kvm.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/5e09a5c47e8a495e888cbdc65a6fafb2c950f529.1386368672.git.yangds.fnst@cn.fujitsu.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

A typo in comment of builtin-annotate.c about 'that'.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/46cb069a4ce21141057a07c0b50baa9968e3228c.1386629050.git.yangds.fnst@cn.fujitsu.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Two 'runs' here breaks the sentence in Description of 'perf archive'
command.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/78a15a9f4f500b6074a1e25917d6e8251f894628.1386629050.git.yangds.fnst@cn.fujitsu.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When we use perf kvm record-report, there is a bug in report subcommand.

Example:
	# perf kvm stat record -a sleep 1
	[ perf record: Woken up 1 times to write data ]
	[ perf record: Captured and wrote 0.678 MB perf.data.guest (~29641 samples) ]
	# perf kvm stat report
	failed to open perf.data: No such file or directory  (try 'perf record' first)
	Initializing perf session failed

This bug was introduced by f5fc1412.

+       struct perf_data_file file = {
+               .path = input_name,
+               .mode = PERF_DATA_MODE_READ,
+       };

        kvm->tool = eops;
-       kvm->session = perf_session__new(kvm->file_name, O_RDONLY, 0, false,
-                                        &kvm->tool);
+       kvm->session = perf_session__new(&file, false, &kvm->tool);

It changed the path from kvm->file_name to input_name, this patch change the path back to
'kvm->file_name', then it works well.

Verification:
	# perf kvm stat record -a sleep 1
	[ perf record: Woken up 1 times to write data ]
	[ perf record: Captured and wrote 0.807 MB perf.data.guest (~35264 samples) ]
	# perf kvm stat report

	Analyze events for all VCPUs:

		     VM-EXIT    Samples  Samples%     Time%   Min Time   Max Time         Avg time

	       EPT_VIOLATION        200    32.79%     1.25%        0us    12064us     62.35us ( +-  96.74% )
	       EPT_MISCONFIG        134    21.97%     0.21%        0us       35us     15.25us ( +-   4.14% )
	       EXCEPTION_NMI         96    15.74%     0.02%        0us       11us      1.95us ( +-   9.81% )
		 APIC_ACCESS         79    12.95%     0.02%        0us       13us      2.94us ( +-  11.20% )
			 HLT         65    10.66%    98.47%        0us    16706us  15084.86us ( +-   1.89% )
	      IO_INSTRUCTION         27     4.43%     0.02%        0us       29us      6.42us ( +-  15.53% )
	  EXTERNAL_INTERRUPT          5     0.82%     0.01%        0us       77us     23.65us ( +-  57.90% )
	 TPR_BELOW_THRESHOLD          4     0.66%     0.00%        0us        1us      1.22us ( +-   4.36% )

	Total Samples:610, Total events handled time:995745.54us.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/1386632823-17539-1-git-send-email-yangds.fnst@cn.fujitsu.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

As there is no -v option for perf kvm, the all debug message for perf
kvm will nerver be printed out to user.

Example:
	# perf kvm --guestmount /tmp/guestmount/ record -a
	Not enough memory for reading perf file header

It is confusing message for newbies such as me. With this patch applied,
we can use -v option to get the detail.

Example:
	# perf kvm --guestmount /tmp/guestmount/ record -a -v
	Can't access file /tmp/guestmount//15069/proc/kallsyms
	Not enough memory for reading perf file header

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1386609311-23889-1-git-send-email-yangds.fnst@cn.fujitsu.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

'next_pow2()' only works for 'unsigned int' but the argument is
'unsigned long'.  Checking for values less than (1 << 31) ensures that
'next_pow2()' is not passed a value out of range but lets anything else
go through unvalidated.

As a result mmap_pages of zero is used e.g.

  perf record -v -m2147483649 uname
  mmap size 0B
  failed to mmap with 22 (Invalid argument)

Fixed:

  perf record -m2147483649 uname
  rounding mmap pages size to 17592186044416 bytes (4294967296 pages)
  Invalid argument for --mmap_pages/-m

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386595120-22978-4-git-send-email-adrian.hunter@intel.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

'SIZE_MAX / page_size' is an upper limit for the maximum number of mmap
pages, not a lower limit.  Change the condition accordingly.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386595120-22978-3-git-send-email-adrian.hunter@intel.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386595120-22978-2-git-send-email-adrian.hunter@intel.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

'mmap_pages' is 'unsigned int' not 'int' e.g.

  perf record -m2147483648 uname
  Permission error mapping pages.
  Consider increasing /proc/sys/kernel/perf_event_mlock_kb,
  or try again with a smaller value of -m/--mmap_pages.
  (current value: -2147483648)

Fixed:

  perf record -m2147483648 uname
  Permission error mapping pages.
  Consider increasing /proc/sys/kernel/perf_event_mlock_kb,
  or try again with a smaller value of -m/--mmap_pages.
  (current value: 2147483648)

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386595120-22978-5-git-send-email-adrian.hunter@intel.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add field 'srcline' that displays the source file name and line number
associated with the sample ip.  The information displayed is the same as
from addr2line.

 $ perf script -f comm,tid,pid,time,ip,sym,dso,symoff,srcline
            grep 10701/10701 2497321.421013:  ffffffff81043ffa native_write_msr_safe+0xa ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/msr.h:95
            grep 10701/10701 2497321.421984:  ffffffff8165b6b3 _raw_spin_lock+0x13 ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/arch/x86/include/asm/spinlock.h:54
            grep 10701/10701 2497321.421990:  ffffffff810b64b3 tick_sched_timer+0x53 ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/time/tick-sched.c:840
            grep 10701/10701 2497321.421992:  ffffffff8106f63f run_timer_softirq+0x2f ([kernel.kallsyms])
  /usr/src/debug/kernel-3.9.fc17/linux-3.9.10-100.fc17.x86_64/kernel/timer.c:1372

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386315778-11633-3-git-send-email-adrian.hunter@intel.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The address being used to calculate the offset was the memory address
but the address needed is the address mapped to the dso. i.e. the 'addr'
member of 'struct addr_location'

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386315778-11633-2-git-send-email-adrian.hunter@intel.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Getting a divide by 0 when events are processed from a file:

   perf trace -i perf.data -s
   ...
   dnsmasq (1684), 10 events, inf%, 0.000 msec

The problem is that the event count is not incremented as events are
processed. With this patch:

   perf trace -i perf.data -s
   ...
   dnsmasq (1684), 10 events, 8.9%, 0.000 msec

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1386211302-31303-4-git-send-email-dsahern@gmail.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Older kernels (e.g., RHEL6) do system call tracing via
syscalls:sys_{enter,exit} rather than raw_syscalls. Update perf-trace to
detect lack of raw_syscalls support and try syscalls.

Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1386211302-31303-2-git-send-email-dsahern@gmail.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The traceevent lib uses pr_stat to display all standard info. It's
defined as __weak. Overloading it with perf version plugged into perf
output system logic.

Displaying the pr_stat stuff under '-v' option.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-12-git-send-email-jolsa@redhat.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In order to get the proper plugins processing we need to use full
trace-event interface when creating tracepoint events. So far we were
using shortcut to get the parsed format.

Moving current 'event_format__new' function into trace-event object as
'trace_event__tp_format'.

This function uses properly initialized global trace-event object,
ensuring proper plugins processing.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-11-git-send-email-jolsa@redhat.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Add trace-event object to keep together 'struct pevent' object with its
loaded plugins with following interface:

int trace_event__init(struct trace_event *t);

  - Initalizes 'struct pevent' object and loads plugins for it

void trace_event__cleanup(struct trace_event *t);

  - Cleanups both 'struct pevent' and plugins

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-10-git-send-email-jolsa@redhat.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Adding filename__read_str util function to read
text file and return it in the char array.

The interface is:
  int filename__read_str(const char *filename, char **buf, size_t *sizep)

  Returns 0/-1 if the read suceeded/fail respectively.

  buf  - place to store the data pointer
  size - place to store data size

v2 change:
  - better error handling suggested by Namhyung Kim.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-9-git-send-email-jolsa@redhat.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Adding 'plugins' target along with the libtraceevent.a, so plugins are
built together with traceevent library.

Adding 'install-traceevent-plugins' Makefile install target, instructing
perf to install plugins into:

  $(HOME)/.traceevent/plugins
    - If installed localy under $HOME

  $(DESTDIR)/$(prefix)/$(libdir)/traceevent/plugins
    - If installed globally

Examples:
  $ make install
  ...
  $ find ~/.traceevent/plugins/
  /home/jolsa/.traceevent/plugins/
  /home/jolsa/.traceevent/plugins/plugin_mac80211.so
  /home/jolsa/.traceevent/plugins/plugin_kvm.so
  /home/jolsa/.traceevent/plugins/plugin_scsi.so
  /home/jolsa/.traceevent/plugins/plugin_sched_switch.so
  /home/jolsa/.traceevent/plugins/plugin_xen.so
  /home/jolsa/.traceevent/plugins/plugin_cfg80211.so
  /home/jolsa/.traceevent/plugins/plugin_function.so
  /home/jolsa/.traceevent/plugins/plugin_kmem.so
  /home/jolsa/.traceevent/plugins/plugin_hrtimer.so
  /home/jolsa/.traceevent/plugins/plugin_jbd2.so

  $ sudo make install DESTDIR=/opt/perf/
  ...
  $ find /opt/perf/lib64/traceevent/plugins/
  /opt/perf/lib64/traceevent/plugins/
  /opt/perf/lib64/traceevent/plugins/plugin_kvm.so
  /opt/perf/lib64/traceevent/plugins/plugin_scsi.so
  /opt/perf/lib64/traceevent/plugins/plugin_mac80211.so
  /opt/perf/lib64/traceevent/plugins/plugin_hrtimer.so
  /opt/perf/lib64/traceevent/plugins/plugin_kmem.so
  /opt/perf/lib64/traceevent/plugins/plugin_jbd2.so
  /opt/perf/lib64/traceevent/plugins/plugin_sched_switch.so
  /opt/perf/lib64/traceevent/plugins/plugin_function.so
  /opt/perf/lib64/traceevent/plugins/plugin_cfg80211.so
  /opt/perf/lib64/traceevent/plugins/plugin_xen.so

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-8-git-send-email-jolsa@redhat.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Changing the pevent_parse_format interface to include the pevent handle.

The goal is to always use pevent object when dealing with traceevent
library. The reason is that we might need additional processing (like
plugins), which is not possible otherwise.

Patches follow to make this happen completely.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-6-git-send-email-jolsa@redhat.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The perf_event__preprocess_sample() function is called in
process_sample_event().  Instead of calling it again in
perf_evsel__print_ip(), pass through the resultant addr_location.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/529F3944.9050007@intel.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

When built without libelf, perf tools was failing to initialize a file
descriptor, but nevertheless closing it.  That sometimes resulted in the
output being truncated because the stdout file descriptor got closed.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386166981-30197-1-git-send-email-adrian.hunter@intel.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

As we have changed the default behavior of 'perf kvm' to --guest
enabled, the parts of the man page that covers the 'record' subcommand
are outdated.

This patch updates it to show the correct output with
--host/--guest/neither/both of them.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/3a3a9c1e05acb5a274d1d8369db5a4c6467d6276.1386197481.git.yangds.fnst@cn.fujitsu.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

As option --host and --guest request no input for it, there should not
be a '=' after them in the man page sources.

And --output expects a filename as the input, so there should be a '='
after it.

This patch removes the needless '=' after --guest and --host, and adds a
'=' after --output in perf-kvm.txt.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/6124d9eb10a3f1f6b399d1db660110bc7a60fd6b.1386197481.git.yangds.fnst@cn.fujitsu.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

As the buildid is read from /sys/kernel/notes, then if we use perf kvm
buildid-list with a perf data file captured by perf kvm record with
--guestkallsyms and --guestmodules, there is no result in output.

This patch add a explanation about it and add a limit of using perf kvm
buildid-list.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/d605a805486340b53bc261aa64d7632ad0a8cf53.1386197481.git.yangds.fnst@cn.fujitsu.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Check for cpu_map__dummy_new() or cpu_map__new() to be called in
perf_evlist__create_maps() is more complicated.

This patch moves the checking work into target.h, combining two
conditions and making perf_evlist__create_maps() more readable.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/b8c41f1fd2c4f0df71eb7b19aea74fb64d46cdda.1386197481.git.yangds.fnst@cn.fujitsu.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>