For those cases that it takes several tries to hit a bug, it would be
useful for ktest.pl to try a test multiple times before it considers
the test as a pass. To accomplish this, BISECT_TRIES ktest config
option has been added. It is default to one, as most of the time a
bisect only needs to try a test once. But the user can now up this
to make ktest run a given test multiple times. The first failure
that is detected will set a bisect bad. It only repeats on success.

Note, as with all race bugs, there's no guarantee that if it succeeds,
it is really a good bisect. But it helps in case the bug is somewhat
reliable.

You can set BISECT_TRIES to zero, and all tests will be considered
good, unless you also set BISECT_MANUAL.

Suggested-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

With the added variable ${KERNEL_VERSION}, it is useful to be
able to use parts of it for other variables.

For example, if you want to create a warnings file for each major
kernel version to test sub versions against you can create
your warnings file with like this:

  WARNINGS_FILE = warnings-file-${KERNEL_VERSION}

But this may add 3.8.12 or something, and we want all 3.8.* to
use the same file, and 3.10.* to use another file, and so on.
With the eval command we can, by adding:

  WARNINGS_FILE =~ s/(-file-\d+\.\d+).*/$1/

Which will chop off the extra characters after the 3.8.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Add a special variable that can be used in other variables called
${KERNEL_VERSION}. This will embed the current kernel version into
the variable. For example:

WARNINGS_FILE = ${OUTPUT_DIR}/warnings-${KERNEL_VERSION}

If the current version is v3.8 then the WARNINGS_FILE will become

  ${OUTPUT_DIR}/warnings-v3.8

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The sample.conf file needs to document all available options.
With the new CLOSE_CONSOE_SIGNAL option, it too needs to be
document.

Cc: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

 Currently ktest sends SIGINT to terminate the console.
 However, there are consoles which do not exit by this signal, for example,
 in my case, "virsh console <guest OS>". In such case, ktest is blocked in
 close_console(). It prevents this automate test.

This patch adds new option CLOSE_CONSOLE_SIGNAL which mean the
signal to terminate the console. Since its default value is "INT",
the original behavior isn't changed.

Link: http://lkml.kernel.org/r/87zjol8pl5.wl%satoru.takeuchi@gmail.com



Signed-off-by: Satoru Takeuchi <satoru.takeuchi@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Different tests may use a different machine. In such cases, we need to
try to get the current grub menu index. If the same grub menu is used
for two different machines, it may not be at the same index on the
second machine. A search for the index must be performed again.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Fix a checkpatch warning.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fsreeze does not work for iso9660 filesystems. A ENOSUPP may be caught
in the freeze case, but the subsequent thaw call would fail and leads to
a false error.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As suggested by Paolo Bonzini, use ioctl instead of calling fsfreeze.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As suggested by Paolo Bonzini, use getmntent instead of parsing output
of mount(1).

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix a checkpatch warning.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Similar to what commit 95a69ada ("tools:
hv: Netlink source address validation allows DoS") does in
hv_kvp_daemon, improve checks for origin of netlink connector message.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This change fixes a few compile errors:

hv_vss_daemon.c:64:15: warning: unknown escape sequence '\/'
hv_vss_daemon.c:64:15: warning: unknown escape sequence '\/'
hv_vss_daemon.c: In function 'vss_operate':
hv_vss_daemon.c:66: warning: 'return' with no value, in function returning non-void
hv_vss_daemon.c: In function 'main':
hv_vss_daemon.c:130: warning: ignoring return value of 'daemon', declared with attribute warn_unused_result
hv_vss_daemon.c: In function 'vss_operate':
hv_vss_daemon.c:47: warning: 'fs_op' may be used uninitialized in this function

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Initial motivation was to avoid the confusing exit when when '/' is
pressed in non verbose mode, as specified in the help line searches
are only available in verbose mode.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-20xezxim2y4agmkx7f3sucll@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Now that the map browser shares the input routine with the hists
browser, there is no need for using any libnewt routine, so remove all
traces except for honouring NO_NEWT=1 on the makefile command line as an
indication that TUI support is not needed, in fact it just sets
NO_SLANG=1.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wae5o7xca9m52bj1re28jc5j@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Instead of an ad-hoc, libnewt based equivalent.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-elrijp95pijt66y6mmij4xm1@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The python/perf.so binding lacks dependency for libtraceevent.a so that
it cause the following error building python/perf.so. This patch
introduce the dependency for it.

   $ make python/perf.so
       CHK -fstack-protector-all
       CHK -Wstack-protector
       CHK -Wvolatile-register-var
       CHK -D_FORTIFY_SOURCE=2
       CHK bionic
       CHK libelf
       CHK libdw
       CHK libunwind
       CHK -DLIBELF_MMAP
       CHK libaudit
       CHK libnewt
       CHK gtk2
       CHK -DHAVE_GTK_INFO_BAR
       CHK perl
       CHK python
       CHK python version
       CHK libbfd
       CHK -DHAVE_STRLCPY
       CHK -DHAVE_ON_EXIT
       CHK -DBACKTRACE_SUPPORT
       CHK libnuma
       GEN python/perf.so
   x86_64-pc-linux-gnu-gcc: error: ../lib/traceevent/libtraceevent.a: No such file or directory
   error: command 'x86_64-pc-linux-gnu-gcc' failed with exit status 1
   cp: cannot stat 'python_ext_build/lib/perf.so': No such file or directory
   make: *** [python/perf.so] Error 1

Signed-off-by: Naohiro Aota <naota@elisp.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/87wqswzznx.fsf@locke.i-did-not-set--mail-host-address--so-tickle-me


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-k85ajz97xbrd8fkt2a8pp7q1@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This reverts commit 0439539f.

This caused this segfault:

[root@sandy linux]# perf sched rec
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.306 MB perf.data (~57062 samples) ]
perf
[root@sandy linux]# perf sched lat
perf: builtin-sched.c:781: thread_atoms_search: Assertion `!(thread != atoms->thread)' failed.
Aborted (core dumped)
[root@sandy linux]#

Further investigation is needed to check that even with machine__remove_thread()
not really deleting the thread referenced in the PERF_RECORD_EXIT (it goes to
machine->dead_threads, because references may still exist to them in things like
 hist, etc) some event later comes for this dead thread and then
machine__findnew_thread() will create a new thead instance that will not be the
same as the one referenced by work_atoms->thread in thread_atoms_search().

For now just revert this patch to get the 'perf sched lat' back working.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
echo Link: http://lkml.kernel.org/n/tip-`ranpwd -l 24`@git.kernel.org
Link: http://lkml.kernel.org/n/tip-hg4s6e5txiwqe00h8rdg1sin@git.kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The symbol addresses in a dso have relative offsets from the start of a
mapping.  So in order to ouput correct offset value from @ip, one of
them should be converted.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1359040242-8269-19-git-send-email-eranian@google.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Leverages the PERF_RECORD_MISC_MMAP_DATA bit in the RECORD_MMAP record
header. When the bit is set then the mapping type is set to
MAP__VARIABLE.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-17-git-send-email-eranian@google.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This new command is a wrapper on top of perf record and perf report to
make it easier to configure for memory access profiling.

To record loads:
$ perf mem -t load rec .....

To record stores:
$ perf mem -t store rec .....

To get the report:
$ perf mem -t load rep

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-15-git-send-email-eranian@google.com


[ Fixed minor conflict with 66857b5a "Sort command-list.txt alphabetically" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This patch adds the --mem-mode option to perf report.

This mode requires a perf.data file created with memory access samples.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-13-git-send-email-eranian@google.com


[ Removed duplicates in the --sort help, man page needs updating,
  Fixed minor conflict with 328ccdac "perf report: Add --no-demangle option" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We use the -W option to obtain the cost of the memory accesses.

Data address sampling is obtained via the -d option.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-14-git-send-email-eranian@google.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This patch adds the sorting and histogram support
functions to enable profiling of memory accesses.

The following sorting orders are added:
 - symbol_daddr: data address symbol (or raw address)
 - dso_daddr: data address shared object
 - locked: access uses locked transaction
 - tlb : TLB access
 - mem : memory level of the access (L1, L2, L3, RAM, ...)
 - snoop: access snoop mode

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-12-git-send-email-eranian@google.com


[ committer note: changed to cope with fc5871ed, the move of methods to
  machine.[ch], and the rename of dsrc to data_src, to match the change
  made in the PERF_SAMPLE_DSRC in a previous patch. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf record has a new option -W that enables weightened sampling.

Add sorting support in top/report for the average weight per sample and the
total weight sum. This allows to both compare relative cost per event
and the total cost over the measurement period.

Add the necessary glue to perf report, record and the library.

v2: Merge with new hist refactoring.
v3: Fix manpage. Remove value check.
Rename global_weight to weight and weight to local_weight.
v4: Readd sort keys to manpage
v5: Move weight to end
v6: Move weight to template
v7: Rename weight key.

Original patch from Andi modified by Stephane Eranian <eranian@google.com>
to include ONLY the weight supporting code and apply to pristine 3.8.0-rc4.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1359040242-8269-6-git-send-email-eranian@google.com


[ committer note: changed to cope with fc5871ed and the hists_link perf test entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It's sometimes useful to see undemangled raw symbol name for example
other tools using the perf output to do manipulation of binaries.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: William Cohen <wcohen@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=55571
Link: http://lkml.kernel.org/r/1364203098-17741-1-git-send-email-namhyung@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This patch adds the --per-core option to perf stat.

This option is used to aggregate system-wide counts
on a per physical core basis. On processors with
hyperthreading, this means counts of all HT threads
running on a physical core are aggregated.

This mode is useful to find imblance between physical
cores running an uniform workload. Cores are identified
by socket: S0-C1, means physical core 1 on socket 0. Note
that cores are identified using their physical core id,
thus their numbering may not be continuous.

Per core aggregation can be combined with interval printing:

 # perf stat -a --per-core -I 1000 -e cycles sleep 1000
 #           time core         cpus             counts events
      1.000090030 S0-C0           1          4,765,747 cycles
      1.000090030 S0-C1           1          5,580,647 cycles
      1.000090030 S0-C2           1            221,181 cycles
      1.000090030 S0-C3           1            266,092 cycles

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360846649-6411-4-git-send-email-eranian@google.com


[ committer note: Remove parts already applied on 86ee6e18 to keep bisectability ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To make it more obvious what this option does as suggested by Andi on
LKML.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360846649-6411-3-git-send-email-eranian@google.com


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Refactor aggregation code by introducing a single aggr_mode variable and an
enum for aggregation.

Also refactor cpumap code having to do with cpu to socket mappings. All in
preparation for extended modes, such as cpu -> core.

Also fix socket aggregation and ensure that sockets are printed in increasing
order.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1360846649-6411-2-git-send-email-eranian@google.com


[ committer note: Fixup conflicts with a7e191c3 "--repeat forever" and
  acf28922 "Use perf_evlist__prepare/start_workload()" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It's for calculating whole trace data size during reading.  However
relation functions are called only in this file, no need to
conditionalize it with tricky +1 offset and rename the variable to
more meaningful name like trace_data_size.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-10-git-send-email-namhyung@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Convert them to pr_debug() and propagate error code.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-9-git-send-email-namhyung@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Rename it to do_read and original do_read to __do_read, and check
their return value.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-8-git-send-email-namhyung@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Check return value of malloc() and fail if error.  Now read_string()
can return NULL also check its return value and bail out.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-7-git-send-email-namhyung@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If pevent allocation in read_trace_init() fails, trace_report() will
return -1 and *ppevent is set to NULL.  Its callers should check this
case and handle it properly.

This is also a preparation for the removal of *die() calls.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-6-git-send-email-namhyung@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Now remove all remaining die() calls and convert them to check return
value and propagate it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-5-git-send-email-namhyung@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Check return value of write and fail if error.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-4-git-send-email-namhyung@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Check return value of malloc and fail if NULL.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-3-git-send-email-namhyung@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

So that it can be used by other places.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1363850332-25297-2-git-send-email-namhyung@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We define it in the Makefile so no need to duplicate it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1363686376-29525-1-git-send-email-namhyung@kernel.org


Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>