... and lose one #ifdef .. #endif sandwich.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

It's incredibly difficult to diagnose early EFI boot issues without
special hardware because earlyprintk=vga doesn't work on EFI systems.

Add support for writing to the EFI framebuffer, via earlyprintk=efi,
which will actually give users a chance of providing debug output.

Cc: H. Peter Anvin <hpa@zytor.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Incorrect use of 0 in terminating entry of arch_tables[] causes the
following sparse warning,

  arch/x86/platform/efi/efi.c:74:27: sparse: Using plain integer as NULL pointer

Replace with NULL.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
[ Included sparse warning in commit message. ]
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

The problem in efi_main was that the idt was cleared before the
interrupts were disabled.

The UEFI spec states that interrupts aren't used so this shouldn't be
too much of a problem. Peripherals however don't necessarily know about
this and thus might cause interrupts to happen anyway. Even if
ExitBootServices() has been called.

This means there is a risk of an interrupt being triggered while the IDT
register is nullified and the interrupt bit hasn't been cleared,
allowing for a triple fault.

This patch disables the interrupt flag, while leaving the existing IDT
in place. The CPU won't care about the IDT at all as long as the
interrupt bit is off, so it's safe to leave it in place as nothing will
ever happen to it.

[ Removed the now unused 'idt' variable - Matt ]

Signed-off-by: Bart Kuivenhoven <bemk@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

This patch fixes a problem with EFI memory maps larger than 128 entries
when booting using the EFI stub, which results in overflowing e820_map
in boot_params and an eventual halt when checking the map size in
sanitize_e820_map().

If the number of map entries is greater than what can fit in e820_map,
add the extra entries to the setup_data list using type SETUP_E820_EXT.
These extra entries are then picked up when the setup_data list is
parsed in parse_e820_ext().

Signed-off-by: Linn Crosetto <linn@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

The handle_cmdline_files now takes the option to handle as a string,
and returns the loaded data through parameters, rather than taking
an x86 specific setup_header structure.  For ARM, this will be used
to load a device tree blob in addition to initrd images.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Make efi_free() safely callable with size of 0, similar to free() being
callable with NULL pointers, and do nothing in that case.
Remove size checks that this makes redundant.  This also avoids some
size checks in the ARM EFI stub code that will be added as well.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Replace the open-coded memory map getting with the
efi_get_memory_map() that is now general enough to use.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Move the open-coded conversion to a shared function for
use by all architectures.  Change the allocation to prefer
a high address for ARM, as this is required to avoid conflicts
with reserved regions in low memory.  We don't know the specifics
of these regions until after we process the command line and
device tree.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Rename relocate_kernel() to efi_relocate_kernel(), and take
parameters rather than x86 specific structure.  Add max_addr
argument as for ARM we have some address constraints that we
need to enforce when relocating the kernel.  Add alloc_size
parameter for use by ARM64 which uses an uncompressed kernel,
and needs to allocate space for BSS.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

The relocate_kernel() function will be generalized and used
by all architectures, as they all have similar requirements.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Rename them to be more similar, as low_free() could be used to free
memory allocated by both high_alloc() and low_alloc().
high_alloc() -> efi_high_alloc()
low_alloc()  -> efi_low_alloc()
low_free()   -> efi_free()

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Add system table pointer argument to shared EFI stub related functions
so they no longer use a global system table pointer as they did when part
of eboot.c.  For the ARM EFI stub this allows us to avoid global
variables completely and thereby not have to deal with GOT fixups.
Not having the EFI stub fixup its GOT, which is shared with the
decompressor, simplifies the relocating of the zImage to a
bootable address.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

No code changes made, just moving functions and #define from x86 arch
directory to common location.  Code is shared using #include, similar
to how decompression code is shared among architectures.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

The x86/AMD64 EFI stubs must use a call wrapper to convert between
the Linux and EFI ABIs, so void pointers are sufficient.  For ARM,
the ABIs are compatible, so we can directly invoke the function
pointers.  The functions that are used by the ARM stub are updated
to match the EFI definitions.
Also add some EFI types used by EFI functions.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Move efi-stub.txt out of x86 directory and into common directory
in preparation for adding ARM EFI stub support.

Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

efi_lookup_mapped_addr() is a handy utility for other platforms than
x86. Move it from arch/x86 to drivers/firmware. Add memmap pointer
to global efi structure, and initialise it on x86.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

Common to (U)EFI support on all platforms is the global "efi" data
structure, and the code that parses the System Table to locate
addresses to populate that structure with.

This patch adds both of these to the global EFI driver code and
removes the local definition of the global "efi" data structure from
the x86 and ia64 code.

Squashed into one big patch to avoid breaking bisection.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

early_ioremap() on IA64 chooses its mapping type based on the EFI
memory map. This patch adds an alias "early_memremap()" to be used
where the targeted location is memory rather than an i/o device.

Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>

we don't need nr_irqs in machine any more after we move to
linear irqdomain for sirfsoc irqchip, so drop them.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

On 64-bit, __pa(&static_var) gets miscompiled by recent versions of
gcc as something like:

        addis 3,2,.LANCHOR1+4611686018427387904@toc@ha
        addi 3,3,.LANCHOR1+4611686018427387904@toc@l

This ends up effectively ignoring the offset, since its bottom 32 bits
are zero, and means that the result of __pa() still has 0xC in the top
nibble.  This happens with gcc 4.8.1, at least.

To work around this, for 64-bit we make __pa() use an AND operator,
and for symmetry, we make __va() use an OR operator.  Using an AND
operator rather than a subtraction ends up with slightly shorter code
since it can be done with a single clrldi instruction, whereas it
takes three instructions to form the constant (-PAGE_OFFSET) and add
it on.  (Note that MEMORY_START is always 0 on 64-bit.)

CC: <stable@vger.kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

/proc/powerpc/lparcfg is an ancient facility (though still actively used)
which allows access to some informations relative to the partition when
running underneath a PAPR compliant hypervisor.

It makes no sense on non-pseries machines. However, currently, not only
can it be created on these if the kernel has pseries support, but accessing
it on such a machine will crash due to trying to do hypervisor calls.

In fact, it should also not do HV calls on older pseries that didn't have
an hypervisor either.

Finally, it has the plumbing to be a module but is a "bool" Kconfig option.

This fixes the whole lot by turning it into a machine_device_initcall
that is only created on pseries, and adding the necessary hypervisor
check before calling the H_GET_EM_PARMS hypercall

CC: <stable@vger.kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

For a search buffer, 2 byte aligned, strchr() was returning pointer
outside of buffer (buf - 1)

------------->8----------------
    // Input buffer (default 4 byte aigned)
    char *buffer = "1AA_";

    // actual search start (to mimick 2 byte alignment)
    char *current_line = &(buffer[2]);

    // Character to search for
    char c = 'A';

    char *c_pos = strchr(current_line, c);

    printf("%s\n", c_pos) --> 'AA_' as oppose to 'A_'
------------->8----------------

Reported-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Debugged-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: <stable@vger.kernel.org> # [3.9 and 3.10]
Cc: Noam Camus <noamc@ezchip.com>
Signed-off-by: Joern Rennecke <joern.rennecke@embecosm.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the updated version of df54d6fa ("x86 get_unmapped_area():
use proper mmap base for bottom-up direction") that only randomizes the
mmap base address once.

Signed-off-by: Radu Caragea <sinaelgl@gmail.com>
Reported-and-tested-by: Jeff Shorey <shoreyjeff@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michel Lespinasse <walken@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Adrian Sendroiu <molecula2788@gmail.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit df54d6fa.

The commit isn't necessarily wrong, but because it recalculates the
random mmap_base every time, it seems to confuse user memory allocators
that expect contiguous mmap allocations even when the mmap address isn't
specified.

In particular, the MATLAB Java runtime seems to be unhappy. See

  https://bugzilla.kernel.org/show_bug.cgi?id=60774



So we'll want to apply the random offset only once, and Radu has a patch
for that.  Revert this older commit in order to apply the other one.

Reported-by: Jeff Shorey <shoreyjeff@gmail.com>
Cc: Radu Caragea <sinaelgl@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes a regression exposed during the merge window by commit
9f310ded "ARM: tegra: fix VBUS regulator GPIO polarity in DT"; namely that
USB VBUS doesn't get turned on, so USB devices are not detected. This
affects the internal USB port on TrimSlice (i.e. the USB->SATA bridge, to
which the SSD is connected) and the external port(s) on Seaboard/
Springbank and Whistler.

The Tegra DT as written in v3.11 allows two paths to enable USB VBUS:

1) Via the legacy DT binding for the USB controller; it can directly
   acquire a VBUS GPIO and activate it.

2) Via a regulator for VBUS, which is referenced by the new DT binding
   for the USB controller.

Those two methods both use the same GPIO, and hence whichever of the
USB controller and regulator gets probed first ends up owning the GPIO.
In practice, the USB driver only supports path (1) above, since the
patches to support the new USB binding are not present until v3.12:-(

In practice, the regulator ends up being probed first and owning the
GPIO. Since nothing enables the regulator (the USB driver code is not
yet present), the regulator ends up being turned off. This originally
caused no problem, because the polarity in the regulator definition was
incorrect, so attempting to turn off the regulator actually turned it
on, and everything worked:-(

However, when testing the new USB driver code in v3.12, I noticed the
incorrect polarity and fixed it in commit 9f310ded "ARM: tegra: fix VBUS
regulator GPIO polarity in DT". In the context of v3.11, this patch then
caused the USB VBUS to actually turn off, which broke USB ports with VBUS
control. I got this patch included in v3.11-rc1 since it fixed a bug in
device tree (incorrect polarity specification), and hence was suitable to
be included early in the rc series. I evidently did not test the patch at
all, or correctly, in the context of v3.11, and hence did not notice the
issue that I have explained above:-(

Fix this by making the USB VBUS regulators always enabled. This way, if
the regulator owns the GPIO, it will always be turned on, even if there
is no USB driver code to request the regulator be turned on. Even
ignoring this bug, this is a reasonable way to configure the HW anyway.

If this patch is applied to v3.11, it will cause a couple pretty trivial
conflicts in tegra20-{trimslice,seaboard}.dts when creating v3.12, since
the context right above the added lines changed in patches destined for
v3.12.

Reported-by: Kyle McMartin <kmcmarti@redhat.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

The branch emulation needs to handle the OCTEON BBIT instructions,
otherwise we get SIGILL instead of emulation.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5726/


Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

An older PVHVM guest (v3.0 based) crashed during vCPU hot-plug with:

	kernel BUG at drivers/xen/events.c:1328!

RCU has detected that a CPU has not entered a quiescent state within the
grace period.  It needs to send the CPU a reschedule IPI if it is not
offline.  rcu_implicit_offline_qs() does this check:

	/*
	 * If the CPU is offline, it is in a quiescent state.  We can
	 * trust its state not to change because interrupts are disabled.
	 */
	if (cpu_is_offline(rdp->cpu)) {
		rdp->offline_fqs++;
		return 1;
	}

	Else the CPU is online.  Send it a reschedule IPI.

The CPU is in the middle of being hot-plugged and has been marked online
(!cpu_is_offline()).  See start_secondary():

	set_cpu_online(smp_processor_id(), true);
	...
	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;

start_secondary() then waits for the CPU bringing up the hot-plugged CPU to
mark it as active:

	/*
	 * Wait until the cpu which brought this one up marked it
	 * online before enabling interrupts. If we don't do that then
	 * we can end up waking up the softirq thread before this cpu
	 * reached the active state, which makes the scheduler unhappy
	 * and schedule the softirq thread on the wrong cpu. This is
	 * only observable with forced threaded interrupts, but in
	 * theory it could also happen w/o them. It's just way harder
	 * to achieve.
	 */
	while (!cpumask_test_cpu(smp_processor_id(), cpu_active_mask))
		cpu_relax();

	/* enable local interrupts */
	local_irq_enable();

The CPU being hot-plugged will be marked active after it has been fully
initialized by the CPU managing the hot-plug.  In the Xen PVHVM case
xen_smp_intr_init() is called to set up the hot-plugged vCPU's
XEN_RESCHEDULE_VECTOR.

The hot-plugging CPU is marked online, not marked active and does not have
its IPI vectors set up.  rcu_implicit_offline_qs() sees the hot-plugging
cpu is !cpu_is_offline() and tries to send it a reschedule IPI:
This will lead to:

	kernel BUG at drivers/xen/events.c:1328!

	xen_send_IPI_one()
	xen_smp_send_reschedule()
	rcu_implicit_offline_qs()
	rcu_implicit_dynticks_qs()
	force_qs_rnp()
	force_quiescent_state()
	__rcu_process_callbacks()
	rcu_process_callbacks()
	__do_softirq()
	call_softirq()
	do_softirq()
	irq_exit()
	xen_evtchn_do_upcall()

because xen_send_IPI_one() will attempt to use an uninitialized IRQ for
the XEN_RESCHEDULE_VECTOR.

There is at least one other place that has caused the same crash:

	xen_smp_send_reschedule()
	wake_up_idle_cpu()
	add_timer_on()
	clocksource_watchdog()
	call_timer_fn()
	run_timer_softirq()
	__do_softirq()
	call_softirq()
	do_softirq()
	irq_exit()
	xen_evtchn_do_upcall()
	xen_hvm_callback_vector()

clocksource_watchdog() uses cpu_online_mask to pick the next CPU to handle
a watchdog timer:

	/*
	 * Cycle through CPUs to check if the CPUs stay synchronized
	 * to each other.
	 */
	next_cpu = cpumask_next(raw_smp_processor_id(), cpu_online_mask);
	if (next_cpu >= nr_cpu_ids)
		next_cpu = cpumask_first(cpu_online_mask);
	watchdog_timer.expires += WATCHDOG_INTERVAL;
	add_timer_on(&watchdog_timer, next_cpu);

This resulted in an attempt to send an IPI to a hot-plugging CPU that
had not initialized its reschedule vector. One option would be to make
the RCU code check to not check for CPU offline but for CPU active.
As becoming active is done after a CPU is online (in older kernels).

But Srivatsa pointed out that "the cpu_active vs cpu_online ordering has been
completely reworked - in the online path, cpu_active is set *before* cpu_online,
and also, in the cpu offline path, the cpu_active bit is reset in the CPU_DYING
notification instead of CPU_DOWN_PREPARE." Drilling in this the bring-up
path: "[brought up CPU].. send out a CPU_STARTING notification, and in response
to that, the scheduler sets the CPU in the cpu_active_mask. Again, this mask
is better left to the scheduler alone, since it has the intelligence to use it
judiciously."

The conclusion was that:
"
1. At the IPI sender side:

   It is incorrect to send an IPI to an offline CPU (cpu not present in
   the cpu_online_mask). There are numerous places where we check this
   and warn/complain.

2. At the IPI receiver side:

   It is incorrect to let the world know of our presence (by setting
   ourselves in global bitmasks) until our initialization steps are complete
   to such an extent that we can handle the consequences (such as
   receiving interrupts without crashing the sender etc.)
" (from Srivatsa)

As the native code enables the interrupts at some point we need to be
able to service them. In other words a CPU must have valid IPI vectors
if it has been marked online.

It doesn't need to handle the IPI (interrupts may be disabled) but needs
to have valid IPI vectors because another CPU may find it in cpu_online_mask
and attempt to send it an IPI.

This patch will change the order of the Xen vCPU bring-up functions so that
Xen vectors have been set up before start_secondary() is called.
It also will not continue to bring up a Xen vCPU if xen_smp_intr_init() fails
to initialize it.

Orabug 13823853
Signed-off-by Chuck Anderson <chuck.anderson@oracle.com>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

If there are UNUSABLE regions in the machine memory map, dom0 will
attempt to map them 1:1 which is not permitted by Xen and the kernel
will crash.

There isn't anything interesting in the UNUSABLE region that the dom0
kernel needs access to so we can avoid making the 1:1 mapping and
treat it as RAM.

We only do this for dom0, as that is where tboot case shows up.
A PV domU could have an UNUSABLE region in its pseudo-physical map
and would need to be handled in another patch.

This fixes a boot failure on hosts with tboot.

tboot marks a region in the e820 map as unusable and the dom0 kernel
would attempt to map this region and Xen does not permit unusable
regions to be mapped by guests.

  (XEN)  0000000000000000 - 0000000000060000 (usable)
  (XEN)  0000000000060000 - 0000000000068000 (reserved)
  (XEN)  0000000000068000 - 000000000009e000 (usable)
  (XEN)  0000000000100000 - 0000000000800000 (usable)
  (XEN)  0000000000800000 - 0000000000972000 (unusable)

tboot marked this region as unusable.

  (XEN)  0000000000972000 - 00000000cf200000 (usable)
  (XEN)  00000000cf200000 - 00000000cf38f000 (reserved)
  (XEN)  00000000cf38f000 - 00000000cf3ce000 (ACPI data)
  (XEN)  00000000cf3ce000 - 00000000d0000000 (reserved)
  (XEN)  00000000e0000000 - 00000000f0000000 (reserved)
  (XEN)  00000000fe000000 - 0000000100000000 (reserved)
  (XEN)  0000000100000000 - 0000000630000000 (usable)

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
[v1: Altered the patch and description with domU's with UNUSABLE regions]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This is a port of c95eb318 ("ARM: 7809/1: perf: fix event validation
for software group leaders") to arm64, which fixes a panic in the arm64
perf backend found as a result of Vince's fuzzing tool.

Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

This is a port of d9f96635 ("ARM: 7810/1: perf: Fix array out of
bounds access in armpmu_map_hw_event()") to arm64, which fixes an oops
in the arm64 perf backend found as a result of Vince's fuzzing tool.

Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Dave Hansen reported that systems between 500G and 600G RAM
crash early if DEBUG_PAGEALLOC is selected.

 > [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
 > [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
 > [    0.000000] BRK [0x02086000, 0x02086fff] PGTABLE
 > [    0.000000] BRK [0x02087000, 0x02087fff] PGTABLE
 > [    0.000000] BRK [0x02088000, 0x02088fff] PGTABLE
 > [    0.000000] init_memory_mapping: [mem 0xe80ee00000-0xe80effffff]
 > [    0.000000]  [mem 0xe80ee00000-0xe80effffff] page 4k
 > [    0.000000] BRK [0x02089000, 0x02089fff] PGTABLE
 > [    0.000000] BRK [0x0208a000, 0x0208afff] PGTABLE
 > [    0.000000] Kernel panic - not syncing: alloc_low_page: ran out of memory

It turns out that we missed increasing needed pages in BRK to
mapping initial 2M and [0,1M) when we switched to use the #PF
handler to set memory mappings:

 > commit 8170e6be
 > Author: H. Peter Anvin <hpa@zytor.com>
 > Date:   Thu Jan 24 12:19:52 2013 -0800
 >
 >     x86, 64bit: Use a #PF handler to materialize early mappings on demand

Before that, we had the maping from [0,512M) in head_64.S, and we
can spare two pages [0-1M).  After that change, we can not reuse
pages anymore.

When we have more than 512M ram, we need an extra page for pgd page
with [512G, 1024g).

Increase pages in BRK for page table to solve the boot crash.

Reported-by: Dave Hansen <dave.hansen@intel.com>
Bisected-by: Dave Hansen <dave.hansen@intel.com>
Tested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: <stable@vger.kernel.org> # v3.9 and later
Link: http://lkml.kernel.org/r/1376351004-4015-1-git-send-email-yinghai@kernel.org


Signed-off-by: Ingo Molnar <mingo@kernel.org>

Commit f6f91b0d ("ARM: allow kuser helpers to be removed from the
vector page") introduced some help text for the CONFIG_KUSER_HELPERS
option which is rather contradictory.

Let's fix that, and improve it a little.

Cc: <stable@vger.kernel.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

In case of normal kexec kernel load, all cpu's are offlined
before calling machine_kexec().But in case crash panic cpus
are relaxed in machine_crash_nonpanic_core() SMP function
but not offlined.

When crash kernel is loaded with kexec and on panic trigger
machine_kexec() checks for number of cpus online.
If more than one cpu is online machine_kexec() fails to load
with below error

kexec: error: multiple CPUs still online

In machine_crash_nonpanic_core() SMP function, offline CPU
before cpu_relax

Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Commit 2ba85e7a (ARM: Fix FIQ code on VIVT CPUs) causes the following build warning:

arch/arm/kernel/fiq.c:92:3: warning: passing argument 1 of 'cpu_cache.coherent_kern_range' makes integer from pointer without a cast [enabled by default]

Cast it as '(unsigned long)base' to avoid the warning.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Starting with kernel v3.5, it is mandatory
to specify ECC strength when using hardware
ECC. Without this, kernel panics with a warning
of the sort:

Driver must set ecc.strength when using hardware ECC
------------[ cut here ]------------
kernel BUG at drivers/mtd/nand/nand_base.c:3519!

Fix this by specifying ECC strength for the boards
which were missing this.

Reported-by: Holger Freyther <holger@freyther.de>
Cc: <stable@vger.kernel.org> #v3.5+
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@linaro.org>

Fix this build error:

  In file included from fs/exec.c:61:0:
  arch/s390/include/asm/tlb.h:35:23: error: expected identifier or '(' before 'unsigned'
  arch/s390/include/asm/tlb.h:36:1: warning: no semicolon at end of struct or union [enabled by default]
  arch/s390/include/asm/tlb.h: In function 'tlb_gather_mmu':
  arch/s390/include/asm/tlb.h:57:5: error: 'struct mmu_gather' has no member named 'end'

Broken due to commit 2b047252 ("Fix TLB gather virtual address range
invalidation corner cases").

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ Oh well. We had build testing for ppc amd um, but no s390  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Peripheral-only mode got broken in v3.11-rc1 because of unknown reasons.
Change the mode to OTG, in practice that should work equally well even
when/if the regression gets fixed.

Note that the peripheral-only regression is a separate patch, this change
is still correct as the role is handled by hardware.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Commit b7e2e75a ("usb: gadget: drop unused USB_GADGET_MUSB_HDRC")
dropped a config symbol that was unused by the musb core, but it turns
out that board support code still had references to it.

As the core now handles both dual role and host-only modes, we can just
pass MUSB_OTG as mode from board files.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Ben Tebulin reported:

 "Since v3.7.2 on two independent machines a very specific Git
  repository fails in 9/10 cases on git-fsck due to an SHA1/memory
  failures.  This only occurs on a very specific repository and can be
  reproduced stably on two independent laptops.  Git mailing list ran
  out of ideas and for me this looks like some very exotic kernel issue"

and bisected the failure to the backport of commit 53a59fc6 ("mm:
limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT").

That commit itself is not actually buggy, but what it does is to make it
much more likely to hit the partial TLB invalidation case, since it
introduces a new case in tlb_next_batch() that previously only ever
happened when running out of memory.

The real bug is that the TLB gather virtual memory range setup is subtly
buggered.  It was introduced in commit 597e1c35 ("mm/mmu_gather:
enable tlb flush range in generic mmu_gather"), and the range handling
was already fixed at least once in commit e6c495a9 ("mm: fix the TLB
range flushed when __tlb_remove_page() runs out of slots"), but that fix
was not complete.

The problem with the TLB gather virtual address range is that it isn't
set up by the initial tlb_gather_mmu() initialization (which didn't get
the TLB range information), but it is set up ad-hoc later by the
functions that actually flush the TLB.  And so any such case that forgot
to update the TLB range entries would potentially miss TLB invalidates.

Rather than try to figure out exactly which particular ad-hoc range
setup was missing (I personally suspect it's the hugetlb case in
zap_huge_pmd(), which didn't have the same logic as zap_pte_range()
did), this patch just gets rid of the problem at the source: make the
TLB range information available to tlb_gather_mmu(), and initialize it
when initializing all the other tlb gather fields.

This makes the patch larger, but conceptually much simpler.  And the end
result is much more understandable; even if you want to play games with
partial ranges when invalidating the TLB contents in chunks, now the
range information is always there, and anybody who doesn't want to
bother with it won't introduce subtle bugs.

Ben verified that this fixes his problem.

Reported-bisected-and-tested-by: Ben Tebulin <tebulin@googlemail.com>
Build-testing-by: Stephen Rothwell <sfr@canb.auug.org.au>
Build-testing-by: Richard Weinberger <richard.weinberger@gmail.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>